[CLOSED}

[TheKiwi]

look closely... The air comes in the top and hits a shelf at coil level directing the air directly at the coil. I'm no master of aerodynamics but it would seem the air in the maker would hit at the bottom of the coil and then proceed upward much like the manta but on a larger scale.

I think a manta, much like the chalice 3, is different in the sense that the conduits within the top piece channels the airflow from top down, with the outlet pointing the airflow directly at the coil.

At the scale of an atomizer + the inconsistent pressure from our inhale, the airflow is 100% turbulent flow, not laminar. So without a conduit to direct its path, it is chaotic, and especially after hitting that "shelf", is far more likely to spread in a way much like a mushroom cloud from an atomic detonation as opposed to being directed in a direction.

But heck, I could care less about the physics of it if the flavor is good, [emoji51][emoji51][emoji51].

Tom, have you tried the maker yourself? Curious to hear your thoughts

 

[Henry Etta]

Direct YouTube Link: www.youtube.com/watch?v=PCkuAC6Pz1U

Note that the volume is screwy by mistake so some segments are much louder than others...sorry, you may have to fiddle with your volume a time or two. You also may feel a strong, burning desire to fiddle with a Maker after watching this vid

Very nice Sloth! I have an unexpected day off today, so I very much enjoyed watching this with my morning coffee.
I'd be very interested to know how this one would work for MTL. It looks like the airflow can close down, but what I don't know is if will work well with restricted airflow.

 

[distortoblotto]

Met the Maker this morning. Tossed in a very quick 3mm 24 to 0.4. We have another keeper! Initial impression is that this thing is everything the Manta could of been. Six holes wide open, flavor and production is excellent. Very well made atty at a reasonable price. What's not to like about that? Need to play with a few more builds, but this one is working great for now.

Great video Slothman!!

 

[holyseano]

Anyone else trying to order and not able to send money through paypal to Tom?

 

[NatGasMan]

 

[Tagi]

Howdy,

Does any one know how wide the CAM-M is and also tall the rda gap is?

also, how much wider then a 22mm rda is the lip?

 

[distortoblotto]

Howdy,

Does any one know how wide the CAM-M is and also tall the rda gap is?

also, how much wider then a 22mm rda is the lip?

Body at 510 is 26.3mm wide and eyeballing the gap with the calipers it's about 2.5mm...Of course a flow ring/ vape band makes it all go away...

Body width in hand is 63.5 mm or 2.5 inches...

 

[Chowderhead1972]

Anyone else trying to order and not able to send money through paypal to Tom?

I don't use PayPal directly. It's done via invoice and Chad. Just fill out the Stilare4 doc and when it's ready for you a doc will be sent to you. If you wish to wish to initiate and send payment PopMoney 0r mailed payments can be used for that but those details are handled via email. I work nights and sleep,when I can; hence my lack of response to your emails late this morning.

 

[Tagi]

Body is 26.3mm wide and eyeballing the gap with the calipers it's about 2.5mm...Of course a flow ring/ vape band makes it all go away...

A delrin flow ring was just what I had in mind for my CAM-M. Thanks.

 

[holyseano]

I don't use PayPal directly. It's done via invoice and Chad. Just fill out the Stilare4 doc and when it's ready for you a doc will be sent to you. If you wish to wish to initiate and send payment PopMoney 0r mailed payments can be used for that but those details are handled via email. I work nights and sleep,when I can; hence my lack of response to your emails late this morning.

Ok I had sent money via Pop$ if that's ok or should I stop it and wait for the invoice arrive?
I just like handling it while I have the money. Thanks in advance and sorry if this is just another echo in your ear

 

[distortoblotto]

A delrin flow ring was just what I had in mind for my CAM-M. Thanks.

 

[distortoblotto]

I don't use PayPal directly. It's done via invoice and Chad. Just fill out the Stilare4 doc and when it's ready for you a doc will be sent to you. If you wish to wish to initiate and send payment PopMoney 0r mailed payments can be used for that but those details are handled via email. I work nights and sleep,when I can; hence my lack of response to your emails late this morning.

Sleep? Highly overrated in my opinion...

 

[Sloth Tonight]

Met the Maker this morning. Tossed in a very quick 3mm 24 to 0.4. We have another keeper! Initial impression is that this thing is everything the Manta could of been. Six holes wide open, flavor and production is excellent. Very well made atty at a reasonable price. What's not to like about that? Need to play with a few more builds, but this one is working great for now.

Great video Slothman!!

View attachment 547017

View attachment 547018

Never tried a vertical, I think I'll try one soon. Pretty killer running a vertical in the center

 

[rudedog]

Never tried a vertical, I think I'll try one soon. Pretty killer running a vertical in the center

i also dug the vert coil,DB does that ALOT.thier was 1 i never could make,the dual vert out of 1 piece of wire.nice vid ya did too RS,the Maker definitly put the hype(m-atty) to bed for me,it Meh ok but not what the Maker can do for sure!being AMERICAN made is another great thing.we need more stuff from the U.S.A.thanks again RS.

 

[Chowderhead1972]

Sleep? Highly overrated in my opinion...

I have it paired down to 8 hours a week, too much?

 

[Chowderhead1972]

i also dug the vert coil,DB does that ALOT.thier was 1 i never could make,the dual vert out of 1 piece of wire.nice vid ya did too RS,the Maker definitly put the hype(m-atty) to bed for me,it Meh ok but not what the Maker can do for sure!being AMERICAN made is another great thing.we need more stuff from the U.S.A.thanks again RS.

MURICA! He!! Yes. If you see me in a Toyota call the police; I have been abducted.

 

[distortoblotto]

I have it paired down to 8 hours a week, too much?

Crap, next thing you'll be telling us is that you need to eat too...

 

[distortoblotto]

i also dug the vert coil,DB does that ALOT.thier was 1 i never could make,the dual vert out of 1 piece of wire.nice vid ya did too RS,the Maker definitly put the hype(m-atty) to bed for me,it Meh ok but not what the Maker can do for sure!being AMERICAN made is another great thing.we need more stuff from the U.S.A.thanks again RS.

The Maker is ripe for the dual one strand vert. First peek at the deck and it went straight to the notes...

 

[rudedog]

i just did the dual strand in 26 ga nichrome on the narda clone and wow .24 is kickin flavor out really well along with the heat i like.i do hate the flathead screws with ANY atty!did this build in the Maker, twisted coil outta .28 ga kanthal(1strd)28 ga nichrome(1 strd) and kanthal flat wire(1strd)(0.8 X0.1) 4/5 wrap on about 1/8th in screw drvr came out to .51 build and WOW flavor/vapor chucker!! and havent been able to force myself to tear it out yet!!my pics suck but i am gettin a lil better now to much light...sheesh.all in all i dig both these atty's!maker a lil more cuz the airflow is way better and adjustable!

 

[beez0527]

View attachment 547059

Allen Bradley control system?

Sent from my SM-P607T using Tapatalk