[CLOSED}

[Sloth Tonight]

For some reason I can't have VC as an ADV. After a couple of hours I start having a tad bit of difficulty breathing. Once I switch to another ejuice I feel better.

1.5% DDL can be a bit overpowering IMHO, even with 13% VC V1 and 3% VBIC. maybe that's why this recipe is good. Will give it a try.


Sent from my iPad using Tapatalk

Diketones...

 

[Nautilusfan]

Diketones...

Yep... Most custards have them

 

[beez0527]

Off=topic...
SO, I rebuilt my Ch-M-Atty, and kablam, it's waaaay better, and I'm diggin' it.
(SS-L 28, 7-wrap, 3mm duals for 0.4 ohms).

Plus, (insert forehead smack smiley here) I just realized that I could stick a supershort drip tip IN the drip tip, which improves it for me. For some reason, I didn't know that was a drip tip sized hole - I thought it was some off-sized mid-bore I was stuck with.

ANYWAY - here's my question: The dual o-ring on the drip-top? That's LOOSE. Not quite "fall out" loose - but pretty danged loose. Has anyone replaced that with one thick o-ring? What size, exactly? I don't think I have anything appropriate lying around despite a collection of about 40 little baggies with spare o-rings... Though if you've found "oh - stick a velocity mini o-ring on there" let me know!

View attachment 557605

The 1st thing I do when I get a new atty is take out the Lil bag o goodies and grab a sharpie and label it and toss it in my gasket drawer.

Sent from my SM-P607T using Tapatalk

 

[Chowderhead1972]

Off=topic...
SO, I rebuilt my Ch-M-Atty, and kablam, it's waaaay better, and I'm diggin' it.
(SS-L 28, 7-wrap, 3mm duals for 0.4 ohms).

Plus, (insert forehead smack smiley here) I just realized that I could stick a supershort drip tip IN the drip tip, which improves it for me. For some reason, I didn't know that was a drip tip sized hole - I thought it was some off-sized mid-bore I was stuck with.

ANYWAY - here's my question: The dual o-ring on the drip-top? That's LOOSE. Not quite "fall out" loose - but pretty danged loose. Has anyone replaced that with one thick o-ring? What size, exactly? I don't think I have anything appropriate lying around despite a collection of about 40 little baggies with spare o-rings... Though if you've found "oh - stick a velocity mini o-ring on there" let me know!

View attachment 557605

I would love to know also. My authentic is the same way. I suppose the looseness makes sense for a dripper but I too would prefer a tighter fit.

 

[Tagi]

Not a answer to the oring question but also JMK makes drip tips for the M atty. Good for if your like me and don't like metal tips.

 

[hildicat]

Tom, saw that you were offering bf pins on fb. Was wondering since there are a number of two post attys these days if you might consider selling pins that would be user serviceable. I think the two most common sizes are 2.5 and 3.0mm? I know the length might differ from atty to atty, but that should be easy enough for us to customize. What doesn't seem as easy is grinding down the screw head that is often required with the 'other' bf pins on the market. Just a thought...

 

[rudedog]

Tom, saw that you were offering bf pins on fb. Was wondering since there are a number of two post attys these days if you might consider selling pins that would be user serviceable. I think the two most common sizes are 2.5 and 3.0mm? I know the length might differ from atty to atty, but that should be easy enough for us to customize. What doesn't seem as easy is grinding down the screw head that is often required with the 'other' bf pins on the market. Just a thought...

i just got a couple diff sizes from FDV,havent tried them on anything yet but thier in the drawer waiting.

 

[Unior]

I'm glad I'm not the only one who doesn't like GVC. Got some several months ago didn't like it when I first got it, let it steep for couple months & still didn't care for it. I like custards & vanilla(if it's not to strong). Nicoticket CLS is so much better to me. But days of ordering premium juice are pretty much over.
Just ordered more NN premixed base & some passion fruit coconut to try.

 

[jeffreyace]

Send me your unwanted gvc so I can try it. I love a full bodied custard. Never had much store bought juice except for good life vapor. Made my own but got sick of mixing 6+ flavors for each bottle. Haven't fell in love with my nn mixes yet.

 

[Chowderhead1972]

Tom, saw that you were offering bf pins on fb. Was wondering since there are a number of two post attys these days if you might consider selling pins that would be user serviceable. I think the two most common sizes are 2.5 and 3.0mm? I know the length might differ from atty to atty, but that should be easy enough for us to customize. What doesn't seem as easy is grinding down the screw head that is often required with the 'other' bf pins on the market. Just a thought...

Probably not. Very few will want to pay what I would have to charge to do them. The Narda/Hobo pin is only truly feasible due to the sheer number of atty and the fact that I can improve on what is already out there. The first 50 pieces sold out in 8 minutes, it takes me longer than that to make 1 and that with all the read outs and gauges set up already. Doing a few of each once you factor in set up and R&D you would be closer to $20 each for a run of 5.

 

[hildicat]

i just got a couple diff sizes from FDV,havent tried them on anything yet but thier in the drawer waiting.

For the most part, those need to have the heads ground down to fit most 510's. That's not something I'm capable of doing easily.

 

[Unior]

Send me your unwanted gvc so I can try it. I love a full bodied custard. Never had much store bought juice except for good life vapor. Made my own but got sick of mixing 6+ flavors for each bottle. Haven't fell in love with my nn mixes yet.

If I had any left I certainly would but it vaped 50mls over about 5 months hoping it would get better. With all the hype I just knew it had to get better. Don't get me wrong it wasn't terrible & Unusable but I've had custards I paid well below half of what I did for that & they were better.

 

[ST Dog]

Sounds great. I'm hoping this opens up a whole new world for me, I'm running out of flavors that I like.

Since I always liked tobacco (first pipe and cigar), especially when I started RYO, I'm into NETs.

Pure tobacco, no toppings.

So many different tobaccos out there to blend in an infinite number of combinations.
Add some spicy orientals, a little perique or mudro, etc.

 

[rudedog]

For the most part, those need to have the heads ground down to fit most 510's. That's not something I'm capable of doing easily.

ive got time that i can mess with stuff like that,holding onto one with a pair of pliers and watching...well hearing it zing across the room when the bench grinder grabbed it..lol.dbl nutting and vice grips worked better the next time...and just easing it into the bench grinder.

 

[Chowderhead1972]

Taking off the rest of the week from my day job to work on the LBCs. Bodies are supposed to,be here today.

 

[Chowderhead1972]

Pics will be up of the colors and invoices will be out ASAP.

 

[Nautilusfan]

Taking off the rest of the week from my day job to work on the LBCs. Bodies are supposed to,be here today.

Pics will be up of the colors and invoices will be out ASAP.

You're a good man!! Always looking out for us

Looking forward to seeing the color options side by side

 

[Chowderhead1972]

You're a good man!! Always looking out for us

Looking forward to seeing the color options side by side

Say no more....

 

[McPuff]

these look amazing!!!! ti grey is the darker grey color right?

 

[Nautilusfan]

Really like the blue!! Glad I chose that for my first one!!
Got to decide whether I want the TI or the red for my second

Might be motivation for 3!

That gold is pretty nice also!!