[CLOSED}

[Nautilusfan]

Said I'd post a pic
Love it....love it.....love it.... Just what I'd envisioned

Really like the smooooooth, rounded corners (This was something I had told Tom was critical for me) The size is as small as it can possibly be in this configuration. Not sure if everyone is aware but Tom made numerous revisions shaving
literally mm's to save space everywhere he could That's why it's as small as it is.

Still not sure what atty is going to reside on it long term but for now a velocity with dual fused claptons and a Drunk J drip tip

 

[inspects]

Guess what day it is........It ain't hump day.....



Sorry for the crappy picture, I'll do better when I get home....

Catfish, this baby is absolutely gorgeous, I'm stunned with the craftsmanship...!

Thank you again...!!

 

[RickCain]

Guess what day it is........It ain't hump day.....



Sorry for the crappy picture, I'll do better when I get home....

Catfish, this baby is absolutely gorgeous, I'm stunned with the craftsmanship...!

Thank you again...!!

Looks amazing! I'm hoping that is the Ti because that the same exact setup I plan to run.

 

[distortoblotto]

Skunked!...F'in USPS... Won't be able to pick it up from the P.O till Tuesday now.

 

[Nautilusfan]

Skunked!...F'in USPS... Won't be able to pick it up from the P.O till Tuesday now.

View attachment 562569

Can't like this

Gotta love usps I'm sure it sat somewhere for no apparent reason

Sorry man!

 

[inspects]

Can't like this

Gotta love usps I'm sure it sat somewhere for no apparent reason

Sorry man!

Ditto what Naut said DB....damn these mods are just fantastic.

I just got home from my office, now I have to find an atty I can build low and expect good flavor since I can now go above 40 watts with TC. Sure don't have a shortage of attys, but I think I'll break out the new gold Stumpy I haven't used yet.....

I am one Happy Camper....!

 

[Unior]

Congrats to everyone who got their LBC today!!!! Every color looks awesome!! The goon looks especially good on there. I have to say I'm jealous

 

[inspects]

Looks amazing! I'm hoping that is the Ti because that the same exact setup I plan to run.

Rick, that is the TI....really nice color.

 

[Chowderhead1972]

Has anyone tried SS temp control on the LBC yet? Asbestos sent me a roll of 316l SS and I tried SS temp control today. I was using it on a dna75 not the LBC but after 5 coils 4 different attys I still can't seem to get it right. First it works great then I sit it down for a minute and it goes straight to temp limit. I have been using NiFe 30 for months and find it to be simply awesome. With SS it works great for a minute and then instant cold over temp. For all you non cloud chasing flavor freaks I highly suggest trying NiFe 30. Great stuff in a tank also. I did try SS in power mode with the 75 and it was good not great but that kind of defeats the purpose doesn't it? I really can't say enough good about NiFe 30. I hope it's available in thicker gauge soon. The stuff I have is similar to 28g. This stuff in 24g would be godly.

 

[inspects]

Has anyone tried SS temp control on the LBC yet? Asbestos sent me a roll of 316l SS and I tried SS temp control today. I was using it on a dna75 not the LBC but after 5 coils 4 different attys I still can't seem to get it right. First it works great then I sit it down for a minute and it goes straight to temp limit. I have been using NiFe 30 for months and find it to be simply awesome. With SS it works great for a minute and then instant cold over temp. For all you non cloud chasing flavor freaks I highly suggest trying NiFe 30. Great stuff in a tank also. I did try SS in power mode with the 75 and it was good not great but that kind of defeats the purpose doesn't it? I really can't say enough good about NiFe 30. I hope it's available in thicker gauge soon. The stuff I have is similar to 28g. This stuff in 24g would be godly.

Tom, I have stockpiled SS since it became readily available. I plan on trying it tomorrow. I'll let you know how it works out....it's all new to me as well.

 

[freedogg]

Tom...is the Petri2 list still open??

 

[snakedoc]

Has anyone tried SS temp control on the LBC yet? Asbestos sent me a roll of 316l SS and I tried SS temp control today. I was using it on a dna75 not the LBC but after 5 coils 4 different attys I still can't seem to get it right. First it works great then I sit it down for a minute and it goes straight to temp limit. I have been using NiFe 30 for months and find it to be simply awesome. With SS it works great for a minute and then instant cold over temp. For all you non cloud chasing flavor freaks I highly suggest trying NiFe 30. Great stuff in a tank also. I did try SS in power mode with the 75 and it was good not great but that kind of defeats the purpose doesn't it? I really can't say enough good about NiFe 30. I hope it's available in thicker gauge soon. The stuff I have is similar to 28g. This stuff in 24g would be godly.

Using t.c with ss 316l on the LBC now. It works very well on spaced coils.

 

[McPuff]

Has anyone tried SS temp control on the LBC yet? Asbestos sent me a roll of 316l SS and I tried SS temp control today. I was using it on a dna75 not the LBC but after 5 coils 4 different attys I still can't seem to get it right. First it works great then I sit it down for a minute and it goes straight to temp limit. I have been using NiFe 30 for months and find it to be simply awesome. With SS it works great for a minute and then instant cold over temp. For all you non cloud chasing flavor freaks I highly suggest trying NiFe 30. Great stuff in a tank also. I did try SS in power mode with the 75 and it was good not great but that kind of defeats the purpose doesn't it? I really can't say enough good about NiFe 30. I hope it's available in thicker gauge soon. The stuff I have is similar to 28g. This stuff in 24g would be godly.

I will be trying to use 316L in the lbc. I love the stuff in my sx350j v2 mod. The key on that mod is to lock in the ambiance temperature and atty resistance. I don't know if that can be done on the dna200. If you pm me I can send you to a place with a tin of info.

 

[beez0527]

Pretty much all is use , but when the temp limit keeps happening it usually means your atty and 510 are not making a good connection. It happened to me with the xl and one of my stumpys, it would always go to temp protection after a couple hits and would stay that way until I unscrewed the atty and put back on. To fix I lowered the 510 then screwed the atty then brought the 510 up to bottom pin and never had another problem with it.

Sent from my SM-P607T using Tapatalk

 

[EddieAdams]

My dna 200 hits temp protected when my coils aren't completely saturated I've found. I'm new to the whole TC thing so don't take my word for it. Just something I've noticed. Squonk and I'm good...

FDA BOC

 

[Chowderhead1972]

Tom...is the Petri2 list still open??

It is but I already ordered them, I did order extras however.

 

[inspects]

Tom, would you have any Stumpy's left by chance?

Have a friend who wants one. I think I have 8, but nobody is prying any of those loose until I have cold dead hands, and they may have trouble then too.

 

[Chowderhead1972]

Using t.c with ss 316l on the LBC now. It works very well on spaced coils.

That's good news... I was trying it out in a hurricane on a vt75. I suspect a crappy 510 connection. Thanks for all the info guys. I'm trying to find 26g NiFe30 I'm pretty sure that's what I need in my life. Btw: if you are using NiFe and switch to 316 learn from my mistake, switch the profile BEFORE hitting the fire button. I will say The colors were magnificent but that was a 15 second coil at best. Evidently the temperature coefficients are vastly different.

 

[Chowderhead1972]

Tom, would you have any Stumpy's left by chance?

Have a friend who wants one. I think I have 8, but nobody is prying any of those loose until I have cold dead hands, and they may have trouble then too.

I have the gold one on the red LBC and one catfish/element branded one both in the trophy case. The offer would have to be pretty high to let go of them. I would sooner let go my e-pheonix Resurection... Which I'm thinking about puting on the red LBC. Did you see the titanium goon? I'm actually shocked that you don't have one enroute to me already.

 

[inspects]

Chowder....I hate to be redundant, but the CAM 200 is the best made mod I own and/or could pray to own. The precision durability and stunning look of any squonker available is just mystifying.

I hope you're damn proud of your invention, because I'm certainly proud to say I bought it from Catfish Atty Mods!

Edit:...please stop calling it the LBC, it's worth its weight in Gold...