[CLOSED}

[Papa_Lazarou]

If you have needle point juice bottles, you can take the cappy bottle and tube out of your mod and fill it through the tube. Much easier than unscrewing your atty and taking a chance of messing up your 510 or trying to get the top off the cappy bottles.

^^ this.

I do this with a number of mods that I use the SB bottles in. Never seen such a persnickety cap design.

It can be a bugger with max VG juices (especially if it's at all cold), but I run closer to 50/50 with most mixes and it works very well.

 

[Chowderhead1972]

^^ this.

I do this with a number of mods that I use the SB bottles in. Never seen such a persnickety cap design.

It can be a bugger with max VG juices (especially if it's at all cold), but I run closer to 50/50 with most mixes and it works very well.

I do the same thing but.... instead of using a needle bottle I use a 12ml syringe with a 14g blunt needle. Both can be had from Nude Nic for under a dollar. Takes me literally less than 10 seconds to fill either bottle sva/LBC/tuttalfumo/ or SB condom bottles.

 

[Duanem]

Count me in for one! Anyone have a lead on a good charger for a 20700? My only charger is a LUC V4 - 26650 is as far as it'll go...

I got some 20700 b and they fit effect LUC V6 fine and are taking a charge - didn't have bend the tabs

 

[Lucatz]

LBC Jr.
1. distortoblotto
2. inspects
3. boobsley
4. ghola1was
5. motabrownie
6. Raynman
7. B2L
8. EZinTN
9. Kentastic
10. TheDigital99
11. Irish Messing
12. OldIronCheeks
13. DennyD
14. Lucatz
15
16.
17.
18.

 

[Chowderhead1972]

I got some 20700 b and they fit effect LUC V6 fine and are taking a charge - didn't have bend the tabs

They go on my XStar vp1 and vp2 just fine. No alterations, no forcing.

 

[Lucatz]

Can you add my name to the list Tom

 

[Chowderhead1972]

I gotchu man...

 

[Chowderhead1972]

Dna75, 20700 battery, 3d printed Carbon Fiber reinforced Nylon, Italian/SS/supersoft bottle. Plates and doors still under consideration. $250-275

LBC Jr list
1. distortoblotto
2. inspects
3. boobsley
4. ghola1was
5. motabrownie
6. Raynman
7. B2L
8. EZinTN
9. Kentastic
10. TheDigital99
11. Irish Messing
12. OldIronCheeks
13. DennyD
14.Duanem
15.Lucatz
16.
17.
18.

 

[Lucatz]

Thank you sir.......

 

[thomas l]

Dna75, 20700 battery, 3d printed Carbon Fiber reinforced Nylon, Italian/SS/supersoft bottle. Plates and doors still under consideration. $250-275
LBC Jr list
1. distortoblotto
2. inspects
3. boobsley
4. ghola1was
5. motabrownie
6. Raynman
7. B2L
8. EZinTN
9. Kentastic
10. TheDigital99
11. Irish Messing
12. OldIronCheeks
13. DennyD
14.Duanem
15.Lucatz
16.Thomasl
17.
18.
19.
20.

 

[Chowderhead1972]

Thanks ThomasL... New Screename? Bolivar MO seems very familiar.

 

[thomas l]

Thanks ThomasL... New Screename? Bolivar MO seems very familiar.

nope same name, maybe from the goon orders

 

[Chowderhead1972]

The LBC Jr body has been finalized' I think you guys will be amazed at the renderings and final product. Harry really stepped it up on the details. 3d printing opens up a lot of options that would be impossible via milling. I hope to have rendering pics tomorrow. Everything has been designed but the actual door plate. It's getting very close now.

 

[Alexander Mundy]

Thanks ThomasL... New Screename? Bolivar MO seems very familiar.

Just a few miles North of me. Back when Bill was President we used to call Bolivar "Hillary" since you had to go through "Hillary" to get to Clinton. (Clinton MO)

 

[rudy4653]

I do the same thing but.... instead of using a needle bottle I use a 12ml syringe with a 14g blunt needle. Both can be had from Nude Nic for under a dollar. Takes me literally less than 10 seconds to fill either bottle sva/LBC/tuttalfumo/ or SB condom bottles.

I tried this method. How do you release the air pressure as you "inject" the juice thru the tube???

I have the filler bottles too and they work well but I really feel uneasy taking the atty off the 510 every time I refill, especially on a regulated TC mod, messes up the reading s sometimes and have to deal with the "same atomizer" message etc. taking the cap off the bottle is a PIA too.
What's the secret???

 

[Chowderhead1972]

I tried this method. How do you release the air pressure as you "inject" the juice thru the tube???

I have the filler bottles too and they work well but I really feel uneasy taking the atty off the 510 every time I refill, especially on a regulated TC mod, messes up the reading s sometimes and have to deal with the "same atomizer" message etc. taking the cap off the bottle is a PIA too.
What's the secret???

Hold the bottle upside down, allow any existing juice to drain to the top of the bottle, squeeze all the air out of the bottle, insert the #14 needle into the tube and force as much juice into the bottle as you can force. The bottle will bulge, keep the base of the bottle pointed up. There will be a big bubble in the bottle. Align the air bubble with the hose and suck the air and a little juice out of the bottle; just to the point that you feel the bottle just start to collapse. Once you feel the collapse pull out the needle and a tiny bit of air will suck back into the bottle. The sucked back air will clean the tube so when you force it up onto the 510 pin it will not leak. Sounds a lot harder than it is. You will master it in a few tries.

 

[bigTRAV710]

Illumn is out of stock on the 30A any one have a reliable source?

Sent from my SM-G935V using Tapatalk

Liion Wholesale is where i get my batteries, they test them and its cheap and they have a good selection.

 

[rudy4653]

Thanks CH ! I'll give it a try.

 

[Chowderhead1972]

Final....

 

[Duanem]

View attachment 641861 Final....

Tom that looks great - say the word and the full $ amount ant the check will be on the way - very impressed - loving my LBC can't wait to have another GREAT mod - thanks for all you do