#cloudporn

[treehead]

Whastup guys! I figured this thread needed to exist, and I'm honestly surprised it doesn't already. In a nutshell #CLOUDPORN is just like #coilporn, but for ANYTHING CLOUD RELATED.

Yes you can even post a pic of your new favorite cloud chasing juice if you'd like, your purdy coils you just built, wicking, airflow, batteries, mods, box mods, atty's, drip tips, technique, or hell even just pictures of an impressive cloud you blew (or tried to blow whatever ) ETC. ETC..

I thought it would be cool to just have a place to share whatever is relevant in your cloud chasing universe, particularly pictures/stories you're proud of (or just want to share in general). Since there isn't much traffic in the "cloud chasing" section, it might be kinda nice to have a thread where a majority of the visitors go to post anything brag-worthy, or just plain cool.

So I'd say it's pretty self-explanatory, it may or may not catch on, whatev's.

I'll start us off!

("The Outhouse", my ugly as sin homemade box mod. Won a comp. with it though!)


Feel free to post anything you want to share! Any feedback would be much appreciated, I'm interested in seeing how ECF clouds! Vape strong chasers!

 

[SLIPPY_EEL]

24g kanth, 3/32id, 5wraps, 6x 3/32 airholes, rayon, 50/50 pg/vg

 

[SLIPPY_EEL]

22g kanth, 3/32, 0.17Ω

i put the collar on upside down on the 22mm plumeveil for extra airflow as below

below is 26g parallel to 2x 28g twisted loosish, it has good clouds ad flavour for a single coil, i even use the mephisto without the airflow control, both cyclops fulll open with this single and still get great flavour


a group picture below of the gang after an ultrasonic bath

 

[juggalofisher88]

dual 4mm ID, 22g 4 wraps, .18ohm rayon wick.
Awesome to see the outhouse won a comp, how is vaping at 8.4v?

 

[G-weezy]

Haven't had much time to build and chuck some serious clouds. But got these wires to play with.

 

[SLIPPY_EEL]

Poseidon-II 5wrap 24g 3/32 0.15Ω muji cotton
This atty is sooo easy to wireup and wick i love it

 

[Jjshbetz11]

Rippin at .26

 

[SLIPPY_EEL]

now im chuffed on the Lancia
turnt a great vape into an amazing vape


I took the o-ring off and used a file on the collar of the chuff that sit's into the collar of the atty

 

[Jjshbetz11]

now im chuffed on the Lancia
turnt a great vape into an amazing vape


I took the o-ring off and used a file on the collar of the chuff that sit's into the collar of the atty

Same cap I use, makes a huge diff! Just wish I could get it clear rather than frosted

 

[johndoe1027]

a group picture below of the gang after an ultrasonic bath

Were you able to get the chuffs to seal onto the MX's? I have the same cap and I got it sanded down to fit but I can't find an O-ring that makes it hold tight. It'll stays put most of the time (and works great) but every now and then it likes to fall off. Seems to be after a change in temperature like going outside.

Oh and that family pic is DROOL WORTHY.

I'm feeling ready to jump into this thread even though my pics aren't up to par yet. Getting some stupid clouds out of this mod with a MutationXv2 built at 0.44 ohm on top of it. Dual 26ga coils spaced wrapped around 0.107" 6/5 wraps and it heats up almost instantly. With 2 fully charged batts that's around 160W at only 19A. With regular 26ga coils.



Terrible cloud pic but the complete and total opaqueness is real.

 

[SLIPPY_EEL]

Heyup Johndoe i didnt put the o-ring back on the chuff, i use it o-ringless but if i put the o-ring back on it will work or fit the standard attys it was ment for.
I took my time with the file and kept testing it for fit and as soon as one side would push into the atty i would force the rest inside for a tight fit

 

[G-weezy]

Had some time, about 20 mins to spare. Decided to go back to 28ga parallel 7/8 macro coil with iTeo wick.

Hope it's big enough clouds.

 

[johndoe1027]

Heyup Johndoe i didnt put the o-ring back on the chuff, i use it o-ringless but if i put the o-ring back on it will work or fit the standard attys it was ment for.
I took my time with the file and kept testing it for fit and as soon as one side would push into the atty i would force the rest inside for a tight fit

I gotcha. I must have filed 0.001" too much off. I thought about deepening the o-ring channel and making it work as intended, but on the MX. Need a dremel tool! I literally have a room full of tools but haven't copped that dremel yet.

G-weezy... That shiz is NUTS! What resistance is that? Looks like ~0.3 - 0.4 but the clouds look like 0.15.... Were you taking 15 second drags?

 

[SLIPPY_EEL]

you could get a 5pack cheap $6.45 2-in-1 Drip Tip + Top Cap for Tobh Atty V2 RDA Atomizers (5-Pack) 5-pack - PMMA / translucent / 20mm at FastTech - Worldwide Free Shipping or you cud get a 5pack of each hahaaa


Heeheehee G-Weezy Good stuff

 

[johndoe1027]

you could get a 5pack cheap $6.45 2-in-1 Drip Tip + Top Cap for Tobh Atty V2 RDA Atomizers (5-Pack) 5-pack - PMMA / translucent / 20mm at FastTech - Worldwide Free Shipping or you cud get a 5pack of each hahaaa


Heeheehee G-Weezy Good stuff

Damn you Eel. Now I'll spend 2 hours and $30 on more chuff caps than ANYONE could ever use. Yes, actually, I might need the multi color 6 pack of aluminum on top of a 5 pack of black delrin. And hey, throw in a 7 pack of super shorts and a 5 pack of super longs while we're at it. Because, you know, free shipping.

 

[SLIPPY_EEL]

Damn you Eel. Now I'll spend 2 hours and $30 on more chuff caps than ANYONE could ever use. Yes, actually, I might need the multi color 6 pack of aluminum on top of a 5 pack of black delrin. And hey, throw in a 7 pack of super shorts and a 5 pack of super longs while we're at it. Because, you know, free shipping.

yep thats how it work's ... just be careful, it's really addictive ordering or watching for new items on FT

 

[G-weezy]

I gotcha. I must have filed 0.001" too much off. I thought about deepening the o-ring channel and making it work as intended, but on the MX. Need a dremel tool! I literally have a room full of tools but haven't copped that dremel yet.

G-weezy... That shiz is NUTS! What resistance is that? Looks like ~0.3 - 0.4 but the clouds look like 0.15.... Were you taking 15 second drags?

Lol no it wasn't 15 sec pulls. I drilled out the TOBH top cap like a Mutation X with 9 more extra holes. 2-5 sec is all I need. Also using the Sigelei to fire up those coils. Usually I only do dual 4-5 wrap 24ga.

 

[G-weezy]

Heeheehee G-Weezy Good stuff

Thanks bro. First time taking a pic of me vaping.

 

[johndoe1027]

you could get a 5pack cheap $6.45 2-in-1 Drip Tip + Top Cap for Tobh Atty V2 RDA Atomizers (5-Pack) 5-pack - PMMA / translucent / 20mm at FastTech - Worldwide Free Shipping or you cud get a 5pack of each hahaaa


Heeheehee G-Weezy Good stuff

yep thats how it work's ... just be careful, it's really addictive ordering or watching for new items on FT

I'm keeping it reigned in so far but THANK YOU for the warning.

 

[johndoe1027]

Messing around with spaced coils. 6-32 screw, 5 wraps of 26ga.




Going on the 8V box for ~190W




That's as fast as I could snap a pic! If it doesn't make it as a PV, it could always be a crappy flashlight!