THE thread for cloud chasers alike.

[BuzzKillBob]

cant find a good thread on the net for us cloud chasers so i thought i would make one. come in,show off your build,name your mod/atty,show your wicking system,tell us your ohms,share what works best for you... all in the name of cloud chasing science.

 

[BuzzKillBob]

Nemesis clone from hcigar,igo-w3 rda,quad coil with 28g kanthal a-1, 6 wraps each around a 5/64 to equal out at .23 ohm on a sony vtc3

 

[weezymagic]

Subd

Sent from my HTC EVO 4G LTE using Tapatalk

 

[1ceCreamMan]

Nemesis clone from Hcigar,igo-w3 rda,quad coil with 28g kanthal a-1, 6 wraps each around a 5/64 to equal out at .23 ohm on a sony vtc3
View attachment 319866View attachment 319867View attachment 319868

http://i1215.photobucket.com/albums/cc518/RTM355/newvape_zpsb2259bd3.jpeg

 

[Choc_Addic]

This a tittle that matches the "coil builts" Super Duper threads with lots and lots of pictures.

For example :
http://www.e-cigarette-forum.com/fo...cloud-chasers-report-here.html?highlight=coil
http://www.e-cigarette-forum.com/fo...-increase-vapor-flavor-th.html?highlight=coil
http://www.e-cigarette-forum.com/fo...st-pictures-your-working-wick-coil-setup.html

These are just the top of the heap.

Cheers

 

[sonicdsl]

Moved to Rebuildable Atomizer Systems

 

[Steamer861]

Nemesis Kick2 Sony 30 amp Helios RDA Dual coils @.51 If it doesn't sound like your welding it's Not low Enough

[/URL][/IMG]

[/URL][/IMG]

 

[jpcwon]

If it doesn't sound like your welding it's Not low Enough

That's awesome!!

 

[KJRxxx]

My current fog machine is a dual nano micro coil with 24g kanthal in a bored out Igo-W riding on the Nemesis with Sony VTC4.

Resistance is .21 ohms

sorry, no pics at the moment.......

 

[Kemosabe]

my biggest cloud producer at the moment is my trident clone. dual micro-coil 28g 0.6Ω. 1/16" ID, minimal cotton wick. stock air holes but theyre pretty big. 5/64" perhaps.
even with the juice ratio being mainly PG, i still get big fluffy clouds.

 

[scrappy]

I am using a quasar with a nemmy clone and Sony ctv4 batteries. 30g parallel duals, .6ohms. I think the biggest thing that helped make clouds is adding a few drops of distilled water to my 100% vg juice. That alone made the clouds denser.

 

[weezymagic]

Correct me if I'm wrong but it's less chamber space better for flavor and more Chamber space better for vape production?

I did one great build but forget what it was and have since further bored my Airholes so I can't replicate it.

Dual Nano dragon is a decent one. Too much cotton for me though.

Current favorite and first attempt at parallel coil. Plan on trying a dual this weekend but don't know what Ohm I should shoot for. I think this is. 5 so I may just duplicate it for. 25ohm.

Phone won't seem to upload pics atm

Sent from my HTC EVO 4G LTE using Tapatalk

 

[el Jexican]

Twisted 26g microcoil (single coil) at .5ohms on the Atomic is my go to set up for flavor, but it also produces a nice cloud. When I'm feeling froggy I use the dual 26g nano coil at .3ohms on the IGO-W. When I'm on the go I use the Reo and Cyclone with a 26g microcoil at .8ohms.

 

[sean5340]

This is a dual coil twisted 30 gauge Kanthal. Dual air holes drilled at 1/16th each. The battery is an Orbtronic 22. The clouds are ridiculous. Today I removed one of the coils and it is measuring .85 ohms. Vapes like a dream with some reduction in cloudiness. Uses WAY less juice.

 

[Rob0506]

Please forgive my photos, I don't have a decent macro lens.


This is a quad micro coil with 28 gauge on a helios. It comes in at .28 ohms. This produces good vapor without too much heat, and the wicking has an easier time keeping up.




This is a quad parasplit with 28 gauge that dex posted on his facebook page. Its on the atomic RDA and was .45 ohms. It didn't work well on the atomic. The problem was that the chamber of the atomic is so small I would get a "misting" of e juice. I think this build would have been pretty great on one of my larger RDAs.


This is the best setup I've tried to date. 22 gauge macro coil on atomic RDA comes in at .17. The vape is a bit hot, but the flavor and vapor production are off-the-hook. I was really surprised with how well the cotton wicking keeps up in this build. I was sure to leave a gap under the coils for airflow (not blocked with cotton) and it makes a big difference.


This is a 28 gauge quad revolver coil, another one I saw on Dex's FB page. This is on an IGO-W and comes in at .48 ohms. I'm still playing with this one, haven't even wicked it yet. I don't expect it will beat the 22 gauge macro, though.

 

[Rob0506]

Correct me if I'm wrong but it's less chamber space better for flavor and more Chamber space better for vape production?

Yes, that's been my experience.

 

[Rob0506]

Posting back on the quad revolver coil. I found it to be a little meh. The vapor was a bit weak (but the resistance is kinda high) and the flavor wasn't very saturated. It gives slightly dry hits. I'm not sure if I should try rewicking. Some of it could be the RDA. I really don't care much for the IGO-W.

Oh well, it was a fun challenge, anyway.

 

[weezymagic]

Been rocking a dual parallel setup on my w4 and... It's pretty good. Been through a few days of Vaping. Not a lot of cotton, so she dries fast and the clouds are pretty good. Nothing monstrous and nothing tiny. Decent middle I guess. I think it was. 24ohm on 28g

Sent from my HTC EVO 4G LTE using Tapatalk