Cloupor Mini Mod 30W

Status
Not open for further replies.

SS stingray

Super Member
ECF Veteran
Oct 2, 2014
400
532
Port Charlotte. Florida
Not KTM, but the 3100 is going to last quite a bit longer..................At lower wattage settings. It will Drain much more rapidly and could be easily damaged to pushed to higher output levels.
Know your application. :)

So I would guess you don't recommend the efest 3100 battery ? I do vape at the lowest setting but who knows what the future brings. That may change if and when I upgrade to subtank nano...........
 

Jayscuzzi

Senior Member
ECF Veteran
Sep 20, 2014
210
284
North Central, Il.
So I would guess you don't recommend the efest 3100 battery ? I do vape at the lowest setting but who knows what the future brings. That may change if and when I upgrade to subtank nano...........
I've always vaped around 12 watts give or take. Since getting the nano I'm easily 18 to 27 watts. Oh how the times have changed. [emoji106]
 

crxess

Grumpy Ole Man
ECF Veteran
Verified Member
Sep 20, 2012
24,438
46,126
71
Williamsport Md
So I would guess you don't recommend the efest 3100 battery ? I do vape at the lowest setting but who knows what the future brings. That may change if and when I upgrade to subtank nano...........

Personally........... I would opt for higher drain and carry a spare if needed for extended time away from a charging source.
 

speed4mee

Full Member
Jun 15, 2012
41
45
Germany
I remove all hot glue and now you can see the clean build.
All connections are flawlessly and the big wires are Silicon wires.
 

Attachments

  • IMG_0243.jpg
    IMG_0243.jpg
    23.2 KB · Views: 99

crxess

Grumpy Ole Man
ECF Veteran
Verified Member
Sep 20, 2012
24,438
46,126
71
Williamsport Md
I remove all hot glue and now you can see the clean build.
All connections are flawlessly and the big wires are Silicon wires.

Your time and effort are appreciated. Much easier for owners to See just how these are built. My IPV Mini is of similar build but not as solid an assembly process. Several parts must be aligned properly during case assembly and are locked by the case halves.
 

gmoney$

Super Member
ECF Veteran
Verified Member
Jan 19, 2013
332
331
California
I've always vaped around 12 watts give or take. Since getting the nano I'm easily 18 to 27 watts. Oh how the times have changed. [emoji106]


I was gonna say the opposite, that I hadn't increased from my usual 11-12 watts when I got the subtank mini. But in my case I wrapped a 1.8ohm coil on the rba deck. Tried the .5 prebuilt, didn't like it. Tried the 1.2, better, but I guess I wanted a smooth vape like my kayfuns. throat hit is the most important thing for me, but I don't like it hot. the subtank mini wicks significantly better than my kayfuns, and tastes a better than the FT erlkonigin mini clone, which has a weird background taste I can't get rid of, or possibly worsened in the attempt.
 

crxess

Grumpy Ole Man
ECF Veteran
Verified Member
Sep 20, 2012
24,438
46,126
71
Williamsport Md
I was gonna say the opposite, that I hadn't increased from my usual 11-12 watts when I got the subtank mini. But in my case I wrapped a 1.8ohm coil on the rba deck. Tried the .5 prebuilt, didn't like it. Tried the 1.2, better, but I guess I wanted a smooth vape like my kayfuns. throat hit is the most important thing for me, but I don't like it hot. the subtank mini wicks significantly better than my kayfuns, and tastes a better than the FT erlkonigin mini clone, which has a weird background taste I can't get rid of, or possibly worsened in the attempt.

Your coils issue is likely related to not having Buck in the device. It cannot reduce wattage to deliver your cooler vape, contrary to what the screen displays.
 

gmoney$

Super Member
ECF Veteran
Verified Member
Jan 19, 2013
332
331
California
I'd like to know about the serial number thing too... most of the reports of failure are incomplete and I can't for sure determine if there are bad ones outside of 0002xxx. Thanks for the responses on the off-topic subtank/coil ohm thing; yes, I knowingly wrap my coils for lack of buck/downregulation and realize I wouldn't have to if I got an sxmini or something that went below 3.6v or 3.8 or whatever it is. At least my VS30 and cloupor go that low unlike my drawer-bound istick20's.
 

KTMRider

Vaping Master
ECF Veteran
Verified Member
Jul 5, 2014
4,538
18,079
NJ
I'd like to know about the serial number thing too... most of the reports of failure are incomplete and I can't for sure determine if there are bad ones outside of 0002xxx. Thanks for the responses on the off-topic subtank/coil ohm thing; yes, I knowingly wrap my coils for lack of buck/downregulation and realize I wouldn't have to if I got an sxmini or something that went below 3.6v or 3.8 or whatever it is. At least my VS30 and cloupor go that low unlike my drawer-bound istick20's.

VS DNA30 does not have step down at all. The rDNA40 does.
 

Jayscuzzi

Senior Member
ECF Veteran
Sep 20, 2014
210
284
North Central, Il.
Do we really know there are exactly 50? (I'm thinking less)

I call BS on the serial fairy tale.

Looking at another Mini (Subtank), I'm amazed how its huge insulator issue is consistently played down, while Cp mini is bashed and ”worried for” even by people who never even touched it.
I know right. I haven't owned a ton of vv/vw devises but out of the ones I've had this one beats them all. Yes that includes the 1st run of the istick. This is so much better made then that batch. I won't comment on the 30 or 50 since I do not own one.
 

jjk1

Senior Member
ECF Veteran
Verified Member
Apr 6, 2014
144
166
Maine, USA
Do we really know there are exactly 50? (I'm thinking less)

I call BS on the serial fairy tale.

Looking at another Mini (Subtank), I'm amazed how its huge insulator issue is consistently played down, while Cp mini is bashed and ”worried for” even by people who never even touched it.

vaping on the mini subtank and cloupor 30 right now. Chances are I'll be dead by supper time.
 
Status
Not open for further replies.

Users who are viewing this thread