Cloupor Mini Mod 30W
- Thread starter Trailz
- Start date
- th_trl_thread_readers 0
- Status
I don't have a ton either (8 or 9?) and this is definitely up there. I've used it every day since I received it.
I think I found a home for my 4th DNA40 board
I finally received my mini today 0006 black and it seems to be performing right did the 15 sec 3x's in a row and no issue, but this thing really puts a drain on the battery my vtc4 only lasted 4 hours where with my ipv mini i get a good 12 hours anybody else notice this.
My battery lasts all day. You are the first to complain about that. I use samsung battery's.
I may have put a half charged battery in as i put another vtc4 in just after i posted that and it seems much better.
Man, I wish I could get all day out of a single 18650, in any mod, not just my Mini.
Man, I wish I could get all day out of a single 18650, in any mod, not just my Mini.
Croak you got to stop chain vaping !!!
Most logical reason.
I average 2 Batteries, sometimes 3 on a Long day. I normally have the mini's @ 30w. Same with the IPV mini's
Charger problems
I started having charging issure with my um20 nitecore charger. After a few minuets it just flashes -0-. I have to take the battery out several time before it resumes charging. This is a pain. It took all day yesterday to charge up one battery. Has anybody had this issue with nitecore UM 20 ?
I started having charging issure with my um20 nitecore charger. After a few minuets it just flashes -0-. I have to take the battery out several time before it resumes charging. This is a pain. It took all day yesterday to charge up one battery. Has anybody had this issue with nitecore UM 20 ?
Externally - Clean the contacts with Rubbing Alcohol
Internally - Check/re-solder Spring connections to board. Springs flex and move, eventually snapping the solder connection loose.
I have already done this on several chargers.
I have this for 2 weeks. I don't want to take apart yet. I cleaned contacts . This charger had high reviews. I think the problem is on the positive end. The neg is spring loaded. It does this on both bay's.
I understand how it is built.
Most of these chargers have the Spring end looped through the board and soldered in place. Popping the Battery out Snaps the spring and rail back toward the board. This is what separates the connection by breaking the spring loose from the Solder or the Solder from the board.
Fix it, send it back if you can, or replace it.
Nitecore UM20 reading -0%- is indicating No Battery in Bay
Also, have you tried switching Priority modes?
Last edited:
I'd return it from where you got it since it's only 2 weeks old. My D2 works great.
I put in battery backwards and led reads EE. Which indicates error. I purchased off E-Bay. I did contact seller and they said they will send out replacement. Looks like I will charge battery's in mini until replacement arrives.
A bit late but what type of Batteries are you having the issue with and how old are they?
LG Battery's
What is the difference between LG HE 2's and HE 4's . Which is better for vaping ?
Thanks
What is the difference between LG HE 2's and HE 4's . Which is better for vaping ?
Thanks
HE4 is just a slight update to the HE2, supposedly runs a little cooler in industrial applications it was really designed for (high performance power tools, etc) and of course it's yellow instead of red, same selling price from the factory in bulk, and LG has probably stopped production of the HE2 by this point.
For day-to-day usage in a mod, almost no difference, same mAh, same amp rating, same wrap thickness, tube length and contact dimensions, it's simply a 1:1 replacement for the HE2.
So grab whichever color you prefer, or the best deal you can find out of the two, there's really no functional difference in how they'll work in a 30 watt mod.
Might, maybe, possibly, be able to see an instrumented test of the HE4 showing it performs a bit better in a higher wattage (100 watts or higher) device after repeated long duration firing, which might show it runs cooler than the HE2. Maybe.
Personally, I prefer the HE4 just because it's easier to find a yellow battery on my desk when I have the lights down low.
HE4 is just a slight update to the HE2, supposedly runs a little cooler in industrial applications it was really designed for (high performance power tools, etc) and of course it's yellow instead of red, same selling price from the factory in bulk, and LG has probably stopped production of the HE2 by this point.
For day-to-day usage in a mod, almost no difference, same mAh, same amp rating, same wrap thickness, tube length and contact dimensions, it's simply a 1:1 replacement for the HE2.
So grab whichever color you prefer, or the best deal you can find out of the two, there's really no functional difference in how they'll work in a 30 watt mod.
Might, maybe, possibly, be able to see an instrumented test of the HE4 showing it performs a bit better in a higher wattage (100 watts or higher) device after repeated long duration firing, which might show it runs cooler than the HE2. Maybe.
Personally, I prefer the HE4 just because it's easier to find a yellow battery on my desk when I have the lights down low.
My experience as well. I have both HE2 and HE4 and have found them both to be great batteries. No real functional difference between them, but the yellow color is somewhat nicer in my opinion!
Bits scrambled by Tapatalk...
- Status
