I don't know Rick. Both just give me E-2 errors non stop, no matter what I put on them. 
I need to email provape and get them in for repairs.
I need to email provape and get them in for repairs.Copper Creek Chit Chat continued....
- Thread starter FlyingV
- Start date
- th_trl_thread_readers 0
- Status
Just put in a ticket at provape, hopefully I can send them in soon. Being down to one makes me nervous, I better go look at the red one. 
Good morning Posse.
Yesterday was quite possibly the worst day Ive had, but I know it will be worse next week.
We had an equipment shelf that came in Thursday that was used and in terrible condition. It happens all the time, but it was one that was ordered out of the "new" stock. I couldnt find any info regarding what sales order it was on so I could order the correct part. So I sent the serial number to the central warehouse, and THEY couldnt find it... So, I pull up the customer name and find the right part to order a replacement. Or so I thought. The replacement came in... Not the right one. So now, I have the original bad shelf, plus the good wrong shelf ordered from two different accounting codes, and I still need to order the right one and get the wrong one and the bad one sent back. Then, we had two large projects getting ready to go get installed. The tech asked "Do we have any power supply parts coming in for this?" I checked my list of materials for the project, and saw that the answer was no. So he called the engineer to tell him that he needed to order some. Engineer said I did, the materials list has them on there. I checked again, and sure enough, they were there. He changed the list without notifying me, so I had to go back and update my copy of the list and verify that we really did have everything for it. Roughly an hour or work that I shouldnt have had to do. The second project was even worse. Engineering changed the entire scope of work on it. They thought that we would be putting in three new shelves in while using three shelves that had already been installed. But they found out that the card/port assignments had been put into use already, so three more shelves had to go in. Again, no one notified me. So I had to spend nearly an hour on the phone with the engineer for THAT one to make sure I knew what I was looking for. Got an hour into getting it straightened out, only to find out that I had two sites that didnt match what they had ordered. Back on the phone. One of the sales orders was ordered for the wrong site. So I had to go back and unreceive everything I had just done then re-receive it back into the system. I finally got all of that fixed by 3:45. I start cleaning up for the day and realize I wont have time to finish. I contact my manager since he said this morning that OT was approved for everyone. I wanted to make sure that that statement applied to me as well. And sure enough, it didnt. When he asked why I was asking for an hour of OT, he said that he couldnt approve it unless I was in the field. So, I still have a HUGE mess sitting in the floor.
And the best news ever... I was also told that I would be working overnight Monday. I get to work 7-4 Monday, then get home, hoover dinner and go to bed. Get up at 9 to be at the job site by 10 for work that starts at midnight. Do the work at my site, then go to another site to help out where there is more work to be done. And work until 6am Tuesday morning. Then get back to the warehouse by 7 to work my normal day. Did I mention that I will be missing softball practice Monday, and possibly Tuesday. I dont want to miss Tuesday practice, but if Im falling asleep standing up, I wont have much of a choice.
So, today, I am going to do nothing but wash the motorcycle. And thats it. I spent all night last night on Google Maps finding back country roads to ride on. Ive mapped out a 50 mile route that covers a lot of twisties that I hope I can program into my GPS.
Its a exhaust muffler. Its got a higher flow rate which lets the engine breathe easier, which creates more power, usually about 5-10hp. And they sound GREAT.
Yesterday was quite possibly the worst day Ive had, but I know it will be worse next week.
We had an equipment shelf that came in Thursday that was used and in terrible condition. It happens all the time, but it was one that was ordered out of the "new" stock. I couldnt find any info regarding what sales order it was on so I could order the correct part. So I sent the serial number to the central warehouse, and THEY couldnt find it... So, I pull up the customer name and find the right part to order a replacement. Or so I thought. The replacement came in... Not the right one. So now, I have the original bad shelf, plus the good wrong shelf ordered from two different accounting codes, and I still need to order the right one and get the wrong one and the bad one sent back. Then, we had two large projects getting ready to go get installed. The tech asked "Do we have any power supply parts coming in for this?" I checked my list of materials for the project, and saw that the answer was no. So he called the engineer to tell him that he needed to order some. Engineer said I did, the materials list has them on there. I checked again, and sure enough, they were there. He changed the list without notifying me, so I had to go back and update my copy of the list and verify that we really did have everything for it. Roughly an hour or work that I shouldnt have had to do. The second project was even worse. Engineering changed the entire scope of work on it. They thought that we would be putting in three new shelves in while using three shelves that had already been installed. But they found out that the card/port assignments had been put into use already, so three more shelves had to go in. Again, no one notified me. So I had to spend nearly an hour on the phone with the engineer for THAT one to make sure I knew what I was looking for. Got an hour into getting it straightened out, only to find out that I had two sites that didnt match what they had ordered. Back on the phone. One of the sales orders was ordered for the wrong site. So I had to go back and unreceive everything I had just done then re-receive it back into the system. I finally got all of that fixed by 3:45. I start cleaning up for the day and realize I wont have time to finish. I contact my manager since he said this morning that OT was approved for everyone. I wanted to make sure that that statement applied to me as well. And sure enough, it didnt. When he asked why I was asking for an hour of OT, he said that he couldnt approve it unless I was in the field. So, I still have a HUGE mess sitting in the floor.
And the best news ever... I was also told that I would be working overnight Monday. I get to work 7-4 Monday, then get home, hoover dinner and go to bed. Get up at 9 to be at the job site by 10 for work that starts at midnight. Do the work at my site, then go to another site to help out where there is more work to be done. And work until 6am Tuesday morning. Then get back to the warehouse by 7 to work my normal day. Did I mention that I will be missing softball practice Monday, and possibly Tuesday. I dont want to miss Tuesday practice, but if Im falling asleep standing up, I wont have much of a choice.
So, today, I am going to do nothing but wash the motorcycle. And thats it. I spent all night last night on Google Maps finding back country roads to ride on. Ive mapped out a 50 mile route that covers a lot of twisties that I hope I can program into my GPS.
Tiff don't you just love that new car smell? What the heck is a flow master? It sounds like a toilet control
Its a exhaust muffler. Its got a higher flow rate which lets the engine breathe easier, which creates more power, usually about 5-10hp. And they sound GREAT.I refuse to like that post on principle.
Nonono... Youre looking at it all wrong. There are different models available. Yes, some are really loud. But most of them are only slightly louder than stock. But I will say this... Sometimes, altering a vehicle's exhaust system will void the manufacturer's warranty. Y'all may want to look into that before you make any changes.
Noise and power. I dont know about the statement Rick was referring to... I just like the sound!!!
I was about to like that. Until I saw Licorice. Blech.Um, yes. I've tried it a time or two million.
That reminds me... where's Sallie?
Good morning James!
Licorice is awesome, but Mr. V agrees with you. I asked him to hand me my mod and he used that stupid pincher thing so he didn't have to get close to licorice.
I don't know, she probably has house pests again. blech.
Licorice is awesome, but Mr. V agrees with you. I asked him to hand me my mod and he used that stupid pincher thing so he didn't have to get close to licorice.
I don't know, she probably has house pests again. blech.
oh noes, adding things to my provari cart.
must
resist
*running from computer*
must
resist
*running from computer*
I know licorice in general has a stout following. But to me, it smells like dirty socks!Good morning James!
Licorice is awesome, but Mr. V agrees with you. I asked him to hand me my mod and he used that stupid pincher thing so he didn't have to get close to licorice.
I don't know, she probably has house pests again. blech.
He still has the pincher thing?!? BWAAAHAHAHAHAHAAAA!!!!!!!!!!!!!!!
Awww. Come on!!! Its RED! AND its SHINY!!! And its PROVARI!!!!
buy it buy it buy it buy it buy it buy it buy it buy it buy it buy it buy it buy it buy it buy it.
He does. And uses it quite often. No one is safe from the pincher, not even Victor who never knows when his stub of a tail is going to get pinched. *sigh*
I probably will just get another blemished one.
In the cart already, just deciding what else I may need while I'm there. I buy them because they repair them. The ones I am sending in are from early 2011. Worth a couple bucks to me to have them fixed, rather than toss them. I hate throwing away mods.
Just do it. I still think their over rated.
Why do little girls have to grow up..? I just had to adjust my daughter's bra straps. She's still a baby.... she shouldnt have to wear those...
She's still a baby.... she shouldnt have to wear those...
Time to go outside. Gonna let the kids play outside while I clean the bike up. One of Melissa's friend's dads is coming by to remove my fallen half a tree.
Y'all have a good day!!!!
Y'all have a good day!!!!
Just checking in to say, HI! Beautiful day in PA... Hope everyone has a great weekend...
pssst, she's not a baby anymore. *ducks*
hi punkin!!!
Remember that deck rail that Mr. V replaced? I just stained it. Stood back to admire it, and I stained it the wrong color. Ugh.
Why do little girls have to grow up..? I just had to adjust my daughter's bra straps.
hi punkin!!!
Remember that deck rail that Mr. V replaced? I just stained it. Stood back to admire it, and I stained it the wrong color.
Ugh.
What's a c16 clearo?
Good morning Posse.
Yesterday was quite possibly the worst day Ive had, but I know it will be worse next week.
We had an equipment shelf that came in Thursday that was used and in terrible condition. It happens all the time, but it was one that was ordered out of the "new" stock. I couldnt find any info regarding what sales order it was on so I could order the correct part. So I sent the serial number to the central warehouse, and THEY couldnt find it... So, I pull up the customer name and find the right part to order a replacement. Or so I thought. The replacement came in... Not the right one. So now, I have the original bad shelf, plus the good wrong shelf ordered from two different accounting codes, and I still need to order the right one and get the wrong one and the bad one sent back. Then, we had two large projects getting ready to go get installed. The tech asked "Do we have any power supply parts coming in for this?" I checked my list of materials for the project, and saw that the answer was no. So he called the engineer to tell him that he needed to order some. Engineer said I did, the materials list has them on there. I checked again, and sure enough, they were there. He changed the list without notifying me, so I had to go back and update my copy of the list and verify that we really did have everything for it. Roughly an hour or work that I shouldnt have had to do. The second project was even worse. Engineering changed the entire scope of work on it. They thought that we would be putting in three new shelves in while using three shelves that had already been installed. But they found out that the card/port assignments had been put into use already, so three more shelves had to go in. Again, no one notified me. So I had to spend nearly an hour on the phone with the engineer for THAT one to make sure I knew what I was looking for. Got an hour into getting it straightened out, only to find out that I had two sites that didnt match what they had ordered. Back on the phone. One of the sales orders was ordered for the wrong site. So I had to go back and unreceive everything I had just done then re-receive it back into the system. I finally got all of that fixed by 3:45. I start cleaning up for the day and realize I wont have time to finish. I contact my manager since he said this morning that OT was approved for everyone. I wanted to make sure that that statement applied to me as well. And sure enough, it didnt. When he asked why I was asking for an hour of OT, he said that he couldnt approve it unless I was in the field. So, I still have a HUGE mess sitting in the floor.
And the best news ever... I was also told that I would be working overnight Monday. I get to work 7-4 Monday, then get home, hoover dinner and go to bed. Get up at 9 to be at the job site by 10 for work that starts at midnight. Do the work at my site, then go to another site to help out where there is more work to be done. And work until 6am Tuesday morning. Then get back to the warehouse by 7 to work my normal day. Did I mention that I will be missing softball practice Monday, and possibly Tuesday. I dont want to miss Tuesday practice, but if Im falling asleep standing up, I wont have much of a choice.
So, today, I am going to do nothing but wash the motorcycle. And thats it. I spent all night last night on Google Maps finding back country roads to ride on. Ive mapped out a 50 mile route that covers a lot of twisties that I hope I can program into my GPS.
I refuse to like that post on principle.
Nonono... Youre looking at it all wrong. There are different models available. Yes, some are really loud. But most of them are only slightly louder than stock. But I will say this... Sometimes, altering a vehicle's exhaust system will void the manufacturer's warranty. Y'all may want to look into that before you make any changes.
Sorry you had such a bad week.
I think the OT issue is stoopid! Sounds like Monday and Tuesday are gonna be pretty rough. That's not good. What are they thinking?? Oh I think the flowmaster sounds good too and hubby is checking on the warranty issue.
Little girls grow up to be teenage girls to women. I know what you're talking about though. I was not prepared when I had to buy that first bra. Boys are a bit easier. Just don't ever, ever, ever walk into a teenage boys room without first knocking.
*shivers* And if the door is locked, walk away.Hey Punkin! Come by more often. You're missed.
Today was a doozy at work. The Great Pyrenees came in...what a freakin' mess!! There were open sores on his skin from him chewing and scratching. He was matted so I had to shave him down. The owner had to stay to help hold him for me otherwise I would be chasing him around the shop since I have to sit on the floor to do big dogs at that shop. I have a hydraulic table at the big shop so it's not a problem. Anyway, the owner said she wasn't picky, just get the hair off and she would bathe him at home. I explained to her that I can't get a smooth cut unless I shave him, bathe him, then go back over him with the clippers. She said she was fine if it was a little rough looking. So I finish and she says I missed a spot. No, no I didn't. I go over it anyway. She did this four times. I was ready to take the clippers to her head. 
I did two other dogs after that then I was finished. When I got home I went through the whole house changing lightbulbs thaat were out in every rooms overhead lights. Went through 8 lightbulbs. Now I have to vacuum since hubby cut grass and drug in dirt and grass all over the place. The kids have done their chores. And I need a nap. Hubby is watching youtube videos on the tv about new mufflers. Mainly he likes to hear it. I need to get him to hook up my new printer later on.
I did two other dogs after that then I was finished. When I got home I went through the whole house changing lightbulbs thaat were out in every rooms overhead lights. Went through 8 lightbulbs.
Now I have to vacuum since hubby cut grass and drug in dirt and grass all over the place. The kids have done their chores. And I need a nap. Hubby is watching youtube videos on the tv about new mufflers. Mainly he likes to hear it. I need to get him to hook up my new printer later on.
She IS TOO a baby!!!pssst, she's not a baby anymore. *ducks*
Remember that deck rail that Mr. V replaced? I just stained it. Stood back to admire it, and I stained it the wrong color.
As long as you didnt stain your feet, youre doing good.
Blech. She wouldve looked just fine with a reverse mohawk.Today was a doozy at work. The Great Pyrenees came in...what a freakin' mess!! There were open sores on his skin from him chewing and scratching. He was matted so I had to shave him down. The owner had to stay to help hold him for me otherwise I would be chasing him around the shop since I have to sit on the floor to do big dogs at that shop. I have a hydraulic table at the big shop so it's not a problem. Anyway, the owner said she wasn't picky, just get the hair off and she would bathe him at home. I explained to her that I can't get a smooth cut unless I shave him, bathe him, then go back over him with the clippers. She said she was fine if it was a little rough looking. So I finish and she says I missed a spot. No, no I didn't. I go over it anyway. She did this four times. I was ready to take the clippers to her head.
I did two other dogs after that then I was finished. When I got home I went through the whole house changing lightbulbs thaat were out in every rooms overhead lights. Went through 8 lightbulbs.
Tell him to look into Mufflex Spintech mufflers.
Thats what I put on the Camaro. Here's what it sounds like. You really only need to listen to the first few seconds to hear it really well. Just....ignore the little white woman that sounds like a big black lady screaming "JEEZUS". 
Oh... and the bad language... and the nagging... 
She IS TOO a baby!!!
As long as you didnt stain your feet, youre doing good.
Blech. She wouldve looked just fine with a reverse mohawk.
Tell him to look into Mufflex Spintech mufflers.
]
I'll show him the video.
d
He said he not heard of them and will add it to the list of ones to look into. Thanks James!
He said he not heard of them and will add it to the list of ones to look into. Thanks James!
- Status
