Status
Not open for further replies.

Jdsgibson

Vaping Master
ECF Veteran
Verified Member
Sep 19, 2011
4,839
21,786
52
Sorryville
Afternoon, willie was gone for a few hours this morning. Haley cried. But he's back. Wife went to get some flea and tick shampoo so he can come back inside. He had at least one tick on him because it was crawling on the wife so she freaked out. Told her to pick him up a bone while she's there.
 

efirdj

ECF Guru
ECF Veteran
Sep 16, 2011
10,134
40,518
Clover, SC
Ahh what's a nap?:lol:
That would be something that even when the chance is there, the kids ruin that too....

We're getting slammed but for some reason I just don't care.:lol:
Not liking the being slammed part. But I am liking the not caring part!

Afternoon, willie was gone for a few hours this morning. Haley cried. But he's back. Wife went to get some flea and tick shampoo so he can come back inside. He had at least one tick on him because it was crawling on the wife so she freaked out. Told her to pick him up a bone while she's there.
If you let him hang around or even keep him, please take him to a vet for shots and a check up. Especially if youre going to keep him.
 

Jdsgibson

Vaping Master
ECF Veteran
Verified Member
Sep 19, 2011
4,839
21,786
52
Sorryville
Yes, that will have to happen

That would be something that even when the chance is there, the kids ruin that too....


Not liking the being slammed part. But I am liking the not caring part!


If you let him hang around or even keep him, please take him to a vet for shots and a check up. Especially if youre going to keep him.
 

Bamrz

Z.A.P.T. Member*
ECF Veteran
Verified Member
Dec 8, 2010
9,013
36,802
PA, near Philly
Happy late afternoon Posse! :)

Sounds more like an early nights sleep instead of a nap. :)
Yup, that's what it turned into. I had about a 2 hour nap before the alarm went off for work.

I often find myself climbing onto the roof to relax.It's a Mom thing...
I used to sunbathe on the roof when I lived in CA. All the houses were one story and the roof was flat, so it was pretty cool. And in Hawaii, we used to sit on the roof to watch the fireworks on the 4th of July.

We're getting slammed but for some reason I just don't care.:lol:
That's how it was at work for me today too. We're supposed to close the window at 2pm, but because of the line that was already inside at 2, we didn't close until about 2:20. Not too bad, really.
 

shatner

Resting In Peace
ECF Veteran
Jan 12, 2010
4,766
11,626
Houston, Tx.
So, how is everyone Today?


Yes, that will have to happen

I think it's cool that you're doing the right thing! :)

Just checking in to see if anyone is being horrid. :lol:

Us, horrid? Never! :p

I really want to do a trigger job on my Glock. Not just a 3.5lb connector and a trigger bar polish. I'm thinking of a Zev Technologies Fulcrum trigger.

https://www.glockworx.com/Detail.aspx?PROD=793694&CAT=3688

Black with red safety:
10023_91052.jpg


As Featured on the Outdoor Channel’s Shooting USA, the Fulcrum is the finest trigger available for the Glock! Complete drop in installation requires no special tools, or the services of a gunsmith. The CNC Billet Aluminum trigger pad has an ergonomic shape with a wide flat face that is ideal for shooting with the pad of your trigger finger as opposed to the more rounded face of the factory trigger. The trigger safety of the Fulcrum is 3x wider and completely flush when depressed. The trigger safety also features a real spring as opposed to the thin plastic nubbin of the factory safety for greater heat and chemical resistance. The Fulcrum trigger features adjustment screws for over travel and pre travel. Overall trigger movement can be shortened to ¼” with all factory safeties intact. Trigger reset has been shortened by half so that pistol can fire mechanically faster. The trigger bar is high polished and precision ground to help eliminate trigger creep and allow the trigger to stack up and break consistently.

Fulcrum Ultimate Kit said:
Includes everything from our Drop In Kit with the addition of our Skeletonized Firing Pin. This firing pin has an extended tip for improved strike and precision ground and polished engagement surfaces to eliminate trigger creep. This is our top of the line trigger kit.

I just don't know if I want to spend that on a trigger when $15 connector (the diagonal medal piece in the pic) will clean the pull up and drop the weight a bit. But the whole kit is adjustable, fully polished, race connector and a new trigger w/ different geometry. Plus the polished, skeletonized firing pin, which is $80-$100 by itself, depending on which one you get.
 
Last edited:

efirdj

ECF Guru
ECF Veteran
Sep 16, 2011
10,134
40,518
Clover, SC
Mrs E got home and I took Kat and CJ with me to the gun shop. Youth .22s are about $150. I really hope that my idea of the bb gun works out and I can get her the rifle next Christmas. They had my scope mount rings, so I get to fiddle around with that in the mancave again tonight.

I also had enough time to realize my wife is an idiot. We had two strands of lights that we bought that had to be exchanged. And I measured the remaining length and realized that we needed one more box plus the two that needed to be exchanged. She called me a few days ago and said that she got my lights exchanged. Silly me, I made the assumption that she had three boxes waiting to be put up. When I got home, I put the ladder up, got on to the roof, and started stringing the lights........ All two boxes. Yeah.... One short. So, we have a good 15 feet of unilluminated roofline. :facepalm:
 

alan_vapes_el_paso

Senior Member
ECF Veteran
Verified Member
Hey Shatner,

I kinda figured she (Flying v?) used real extracts, but what exactly does this mean? Or how is it accomplished, any idea? A friend and I have been fiddling around w/some DIY juices, but he's only got artificial flavors out of bottles. I read a thread about extracting real fruit juices, but it seems like the guy never quite figured it out.

I think I need to find a Heisenberg (Breaking Bad) like guy here in town and put him to work on this..
 

RickMc

Vaping Master
ECF Veteran
Verified Member
Feb 26, 2012
3,818
14,902
Fontana, CA
Hey Shatner,

I kinda figured she (Flying v?) used real extracts, but what exactly does this mean? Or how is it accomplished, any idea? A friend and I have been fiddling around w/some DIY juices, but he's only got artificial flavors out of bottles. I read a thread about extracting real fruit juices, but it seems like the guy never quite figured it out.

I think I need to find a Heisenberg (Breaking Bad) like guy here in town and put him to work on this..

She mostly uses magic and witchcraft....
 

shatner

Resting In Peace
ECF Veteran
Jan 12, 2010
4,766
11,626
Houston, Tx.
Hey Shatner,

I kinda figured she (Flying v?) used real extracts, but what exactly does this mean? Or how is it accomplished, any idea? A friend and I have been fiddling around w/some DIY juices, but he's only got artificial flavors out of bottles. I read a thread about extracting real fruit juices, but it seems like the guy never quite figured it out.

I think I need to find a Heisenberg (Breaking Bad) like guy here in town and put him to work on this..

I'm honestly not sure, Alan. I'm sure when FlyingV is back from personal business this weekend she'll answer as much as she can. She does keep some things a mystery, though. Which is understandable, imo.

Alright, I'm out. Have a good evening, everyone!
 
Status
Not open for further replies.

Users who are viewing this thread