Coppervape's Skyline Clone

[Domejunky]

And new post because of the photo limit.

This could never ever happen with the original or any other high-end atomizer. I was just assembling it and when I was finished I noticed what happened. No big deal at all but again - it would never happen with the original.

I noticed a similar thing after I'd disassembled, and used a bit of wet & dry on mine. I had 90% of the cost of the original still in my bank account! Would never happen with the original...

What are the differences you noticed when comparing to the original that account for the average flavour?

 

[soulseek]

And new post because of the photo limit.

This could never ever happen with the original or any other high-end atomizer. I was just assembling it and when I was finished I noticed what happened. No big deal at all but again - it would never happen with the original.

Used to happen all the time with most GG atomisers. I heard the Armed is a bit better buy never got around to buying it.

 

[soulseek]

By the way I recently received the clone and I must say it’s amazing. Especially at that price point.

Hopefully when Vasilis releases new stock with the 2ml version I can grab an original one and support him because it is just that good! Just as good as what I considered the best for my taste (tiny tank, nectar) with the exception of the skyline being easy to coil, fill, maintain.

 

[Moonwalker]

SQuape E for the win.

 

[mogelwarfare]

Don't have the skyline yet but will echo @kiba on the Hussar w mtl kit and micro chamber.. also the SXK doggy style at fasttech for $10 w coupon code MAP is a fantastic mtl tank

Im still looking for "my" perfect mtl rta , im owning a cthulhu mtl and i do like the vape , allthough i have to manually restrict the airflow to a minimum .

I love a tight draw like a cigarette and im trying to build around 1.5 ohms .

I was searching for that kit you mentioned but couldnt find it on fasttech and gearbest . Can someone actually recommend me the actual best atomizer for my usage ?

 

[Asbestos4004]

And new post because of the photo limit.

This could never ever happen with the original or any other high-end atomizer. I was just assembling it and when I was finished I noticed what happened. No big deal at all but again - it would never happen with the original.

which batch is your authentic from?

 

[ToolmanTexas]

Im still looking for "my" perfect mtl rta , im owning a cthulhu mtl and i do like the vape , allthough i have to manually restrict the airflow to a minimum .

I love a tight draw like a cigarette and im trying to build around 1.5 ohms .

I was searching for that kit you mentioned but couldnt find it on fasttech and gearbest . Can someone actually recommend me the actual best atomizer for my usage ?

If you love a tight draw I would also try a Kayfun Lite while you can still get a clone.

KFL:
$14.85 Kayfun Lite Plus V2 Styled RTA Rebuildable Tank Atomizer - 4ml / 316 stainless steel / 22mm dia. at FastTech - Worldwide Free Shipping

Hussar:
$19.79 Coppervape Hussar Styled RTA Rebuildable Tank Atomizer - 5.7ml / stainless steel / 22mm at FastTech - Worldwide Free Shipping
$1.35 Replacement Airhole Pin Post for Coppervape Hussar RTA Atomizer - 1.3mm diameter airhole at FastTech - Worldwide Free Shipping
Hussar RTA single coil deck (attack of the clones)

SXK DoggyStyle (use coupon code MAP to get the price to $10)
$14.00 SXK Doggy Styled RTA Rebuildable Tank Atomizer - 3.5ml / stainless steel + PC / 22mm dia. at FastTech - Worldwide Free Shipping
SXK DOGGY STYLE
SXK Doggy Styled RTA Rebuildable Tank Atomizer wicking

 

[Domejunky]

Im still looking for "my" perfect mtl rta , im owning a cthulhu mtl and i do like the vape , allthough i have to manually restrict the airflow to a minimum .

I love a tight draw like a cigarette and im trying to build around 1.5 ohms .

I was searching for that kit you mentioned but couldnt find it on fasttech and gearbest . Can someone actually recommend me the actual best atomizer for my usage ?

Which restrictor are you using with the Cthulhu? I use the middle one, and get a loose MTL. Tried various builds when I first got them, the smallest seemed pretty tight, and you could restrict the airflow a touch more by getting the build closer to the hole.

If you like a really tight draw, you might find a Kayfun Mini V3, Gem, Origen V2 MkII or Pallas more your style. Or if you want to play with mesh, the Nextiny/Nextgen can go really tight - and smooth...

Sent from my Aquaris X5 using Tapatalk

 

[ToolmanTexas]

I received my CV Skyline yesterday. Using the 1x1.5mm air disk and put a 2.25mm 28 AWG Kanthal micro coil in there coming out to 1.5 ohm and it is vaping very nicely and seems to be on par with CV Hussar, SXK Doggy, etc. Need to spend a bit more time with it but initial thoughts are good... only thing I don't like is that air disk material, I don't buy that it is peek.

 

[dsheik]

I received my CV Skyline yesterday. Using the 1x1.5mm air disk and put a 2.25mm 28 AWG Kanthal micro coil in there coming out to 1.5 ohm and it is vaping very nicely and seems to be on par with CV Hussar, SXK Doggy, etc. Need to spend a bit more time with it but initial thoughts are good... only thing I don't like is that air disk material, I don't buy that it is peek.

I received mine a couple days ago. About the same build as you, came out to 1.3 ohms. I think im using the 2x1.5mm air disk. The one PBusardo used in his review. Got to say its been great right out of the gate. Very impressed with this CV Skyline.

 

[mogelwarfare]

Which restrictor are you using with the Cthulhu? I use the middle one, and get a loose MTL. Tried various builds when I first got them, the smallest seemed pretty tight, and you could restrict the airflow a touch more by getting the build closer to the hole.

If you like a really tight draw, you might find a Kayfun Mini V3, Gem, Origen V2 MkII or Pallas more your style. Or if you want to play with mesh, the Nextiny/Nextgen can go really tight - and smooth...

Sent from my Aquaris X5 using Tapatalk

Im using the smallest hole and turn the afc to a minimum to restrict it even more tight . im enjoing my cthulhu so much , too bad it has leaking issues no matter how i wick it :-(

I have this one aswell , enjoing the draw so much , but flavor is weaker than cthulhu and refilling is a pain in the ...
$6.31 Free Shipping Kayfun Mini Styled RTA Rebuildable Tank Atomizer (2.5ml) (Kayfun Mini, SS + PMMA, Translucent) at m.FastTech.com

 

[mogelwarfare]

If you love a tight draw I would also try a Kayfun Lite while you can still get a clone.

KFL:
$14.85 Kayfun Lite Plus V2 Styled RTA Rebuildable Tank Atomizer - 4ml / 316 stainless steel / 22mm dia. at FastTech - Worldwide Free Shipping

Hussar:
$19.79 Coppervape Hussar Styled RTA Rebuildable Tank Atomizer - 5.7ml / stainless steel / 22mm at FastTech - Worldwide Free Shipping
$1.35 Replacement Airhole Pin Post for Coppervape Hussar RTA Atomizer - 1.3mm diameter airhole at FastTech - Worldwide Free Shipping
Hussar RTA single coil deck (attack of the clones)

SXK DoggyStyle (use coupon code MAP to get the price to $10)
$14.00 SXK Doggy Styled RTA Rebuildable Tank Atomizer - 3.5ml / stainless steel + PC / 22mm dia. at FastTech - Worldwide Free Shipping
SXK DOGGY STYLE
SXK Doggy Styled RTA Rebuildable Tank Atomizer wicking

I like the draw of my innokin endura really much i have ordered a hussar now aswell , i hope this is the answer for my search

 

[benley73]

Im still looking for "my" perfect mtl rta , im owning a cthulhu mtl and i do like the vape , allthough i have to manually restrict the airflow to a minimum .

I love a tight draw like a cigarette and im trying to build around 1.5 ohms .

I was searching for that kit you mentioned but couldnt find it on fasttech and gearbest . Can someone actually recommend me the actual best atomizer for my usage ?

Try the hussar Flavours are phenomenally good

Sent from my ONEPLUS A3003 using Tapatalk

 

[Chodi]

I received my Coppervape Skyline this morning. I gave it a bath and then built it using 28g Kanthal twist wire. Came in at .75ohm. I used the larger of the two supplied drop in air vents for this build. I have ordered a full set but they won't arrive for another week.

I find it an excellent vape and very easy to build. The quality of the clone is also first rate. I have had no leaking and no problems through the first tank. I find the airflow with the supplied vent to be very restricted sort of like my Kayfun V5 would be on the second setting. I normally vape the Kayfun on the third setting so I will probably change this out for a slightly larger vent when the set arrives. Generally though the flavor is excellent and I have no complaints.

 

[mav2000]

Got minie yesterday. Loving the flavor, but i cant help feeling that the draw is a bit on/off/on/off. Tried in TC and regaular wattage mode on a dna 75. I keep the airflow wide open and even use the largest air disk. But i keep the liquid feed control open to a minimum.

Also either this tank has a very low capacity or I am going through liquid like a beast...compared to a KF5 or digiflavor siren

 

[Chodi]

Got minie yesterday. Loving the flavor, but i cant help feeling that the draw is a bit on/off/on/off. Tried in TC and regaular wattage mode on a dna 75. I keep the airflow wide open and even use the largest air disk. But i keep the liquid feed control open to a minimum.

Also either this tank has a very low capacity or I am going through liquid like a beast...compared to a KF5 or digiflavor siren

I haven't measured it yet but I agree it does not seem to hold 4ml. More like 3ml would be my guess. The draw seems to be mostly a function of the air disk used. I find the airflow control to have only a small effect. I wish the screws for the coil mount were hex or even phillips. The screws provided make it more difficult to get a tight connection.

 

[Domejunky]

I haven't measured it yet but I agree it does not seem to hold 4ml. More like 3ml would be my guess. The draw seems to be mostly a function of the air disk used. I find the airflow control to have only a small effect. I wish the screws for the coil mount were hex or even phillips. The screws provided make it more difficult to get a tight connection.

I measured it by weight - 3.6-3.7ml - I'm filling to the bottom of the kidney holes

 

[Chodi]

My clone was from 3F and has the logo. I have no sharp edges of any kind. I saw the photo and the complaint about the air flow being sharp but it is not so on mine. Is it possible that the ones with the logo are slightly different than those that ship without? The machining on mine is perfect.

 

[ian91]

I measured it by weight - 3.6-3.7ml - I'm filling to the bottom of the kidney holes

I filled mine using a needle. Takes 3.1ml.

 

[godfatherI]

My clone was from 3F and has the logo. I have no sharp edges of any kind. I saw the photo and the complaint about the air flow being sharp but it is not so on mine. Is it possible that the ones with the logo are slightly different than those that ship without? The machining on mine is perfect.

Bought mine directly from coppervape w/ logo and the airflow cutouts are sharp. Maybe variations among runs; would be expected. Glad yours aren't sharp.

In any case, it is one great atty.


Sent from my iPhone using Tapatalk