Coppervape's Skyline Clone

[benley73]

The dark colouring of juices can other have a look when this happens to the top inside of the Chamber domed part leading to chimney.

I had a look at mine before refilling it was caked with dark juice slime , quick clean an problems solved [emoji6]

Im guessing that its this evaporatted juices lining the inside of the Chamber chimney being a small chimney and a domed cap inside .
Its then slowly diluting down into the new juice ,
thus making this darker colour leach out ,
into the juices ,
Being a nice small compact double chamber its causing the condensation to pile up there and slowly leach back down.

Ive just cleaned mine other wise id of shown the picture ,
but im guessing if you clean this often like i have done , then no more leaching ,

3f or direct from CV has the branding i believe and it is manufactured a little better no sharp edges or burrs,

Sent from my ONEPLUS A3003 using Tapatalk

Works fine with a 2mm micro coil or 2.5mm build not tried
3mm in mine,. Small wick tails just slightly longer than width of coil fluffed out then stuffed down covering deck juice wells using a dental pic tool ,
Then pushed up against juice holes. Flavours great , got a 5 wrapped Clapton in now ,[emoji6]
2.5mm no deck insert for full Airflow thought id try without on this one. .
Hussar still beats it on Flavours ,
Also just rebuilt Squape x dream single coil deck thats going great on cartel tube mod , now need to save up for Squape E next looks great

 

[mrjohs]

I got mine from FT lately, the one with no logos. I also have one with logos which I ordered from Coppervape directly. As far as I can tell it is 100% the same. If anything the one from FT is a little better. On the one from CV the 510 positive screw is very shallow and easy to strip. Other than that there is no difference that I am able to spot at close inspection.

 

[Kusie]

I had an unpleasant suprise with my new Coppervape Skyline, it seems it doesn´t really like being tilted sideways... I had it completely filled and the JC was only slighly open. Was stored in a bag and it fell over and it spilled lots of juice in my bag, almost 2 ml... bummer. Not sure where the juice was comming out though.

Edit: it IS a very hungry atty for sure, it eats juice like nothing else... wow!

K.

 

[Chodi]

I had an unpleasant suprise with my new Coppervape Skyline, it seems it doesn´t really like being tilted sideways... I had it completely filled and the JC was only slighly open. Was stored in a bag and it fell over and it spilled lots of juice in my bag, almost 2 ml... bummer. Not sure where the juice was comming out though.

Edit: it IS a very hungry atty for sure, it eats juice like nothing else... wow!

K.

I have not experienced any leaks but I have noticed that this tank has a pressure issue. It has the same issue as my Geekvape Ammit (single coil). As you use it it builds internal pressure and needs to be turned on its side or even better, upside down to relieve the pressure. You can see it forming dark liquid near the jfc. If I turn it upside down and rotate it then right side up there is a flood of bubbles raising. I have only been through about 4 tanks on this new one so I cannot say if there is a permanent fix for this, but on my Ammit there is no fix. It is a well known issue on the Ammit and I just deal with it as described (probably like most owners).

I don't find this a deal breaker and I have no way to test if the original tank has the same issue. Given the 1:1 design I suspect the original is the same. I still find this clone to have a fine vape although not enough to justify the retail price of the original. I do find the actual 3ml capacity limiting and that causes me to lament the TDP 2ml limit on new tanks. I for one could not live with that limit comfortably. I find I am refilling this 3ml often.

 

[benley73]

I find the Squape x so much easier to refill , twist to seal chamber unscrew top cap pour in juice screw down cap , twist open an vape , with single coil deck its Flavours are fantastic , but only made for small builds 2mm 2.5mm
Iknow some don't like it ,
but once you get a good build in there , It shines for me ,
Hussar MTL/ DTL
Squape x MTL/ DTL
Skyline MTL/DTL
Taifun GTv3
Taifun Gtv3 mini
Origen MK ll RDTA mtl
Fev v4 mtl
I like them all once built an wicked right. All give great Flavourful vape all have there own specific qualities,
Plain spaced 316L which i seem to prefer over Claptons in these single coil small tanks

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

I haven't measured it yet but I agree it does not seem to hold 4ml. More like 3ml would be my guess. The draw seems to be mostly a function of the air disk used. I find the airflow control to have only a small effect. I wish the screws for the coil mount were hex or even phillips. The screws provided make it more difficult to get a tight connection.

Should be able to buy some grubs hex if you get the size of them , i have tons of spare m2 m3 in different lengths
Blk ones seem to be more hardened i usually swap the tanks grubs for my blk ones the Squape x ones are the tiniest ive used and hardest to find in bulk ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[Chodi]

I noticed today while looking around some China sites that 2F has the Coppervape Skyline properly listed as 3ml. Some of the other sites still list it as 4ml. I can say for certain now that it is 3ml. I find it a bit small at 3ml for my use I cannot even imagine the pain in using the new TPD 2ml tanks. I wouldn't bother with them. I don't even understand how they came up with the 2ml limit? Makes no sense to me.

 

[Leo Bak]

I don't even understand how they came up with the 2ml limit? Makes no sense to me.

They tested it on children, they tended not to survive anything over 2ml. They can easily eat a whole pack of cigs however, no need to regulate that.

 

[guvnaa]

I noticed today while looking around some China sites that 2F has the Coppervape Skyline properly listed as 3ml. Some of the other sites still list it as 4ml. I can say for certain now that it is 3ml. I find it a bit small at 3ml for my use I cannot even imagine the pain in using the new TPD 2ml tanks. I wouldn't bother with them. I don't even understand how they came up with the 2ml limit? Makes no sense to me.

It really doesn't make sense at all. People will just be walking around with spare juice in their bags/pockets to compensate. Seems to me that creates potential problems all while solving one that doesn't even exist...

On a more positive note my skyline arrives in a few days!

 

[kiba]

I have an authentic and flavor is the same as on the cline, a bit lacking. It's fine though, my gf is now using it and with the clone she has a full set of spare everything.

Time will only tell if I've learned my lesson that newer is not always better

Sent from my SM-G955U using Tapatalk

 

[sos2001]

Mine arrived from 3f today. MAJOR problem!!! I did not notice this when I took it apart to soak, but when I went to put it back together, the deck will not screw in far enough to seat the glass!!!!!! It's not that it's won't slide over the orings, they have been lubed. No cross threading took place. Everything was soaked and washed in water, so no visible burrs can be seen or felt. I don't know what it could be other than a defect.

 

[Chodi]

Mine arrived from 3f today. MAJOR problem!!! I did not notice this when I took it apart to soak, but when I went to put it back together, the deck will not screw in far enough to seat the glass!!!!!! It's not that it's won't slide over the orings, they have been lubed. No cross threading took place. Everything was soaked and washed in water, so no visible burrs can be seen or felt. I don't know what it could be other than a defect.

Two points about this. It is necessary to reverse (counter clockwise) rotate the base until it begins to seat then thread it in. I had the same issue until I realized this. Just trying to thread it in as you normally would and it did not work for me. Once I went counter clockwise until it seated in the threads all was fine.
Second comment about this is that the juice flow control cannot be screwed all the way down when you are replacing the build deck. The jfc can actually restrict the build deck from going in. Make sure your jfc is screwed all the way into the top and then leave it open a bit when replacing the base. I have even done this with a partially full tank and as long as you hold the tank upside down (place it on a solid surface) it will be fine. Then once the base is in place you can screw the jfc closed before turning the tank upright.

Hope this helps.

 

[benley73]

Now what a nice looking combo ,
Using the Included beauty ring with Ares mod.
75w , TC Mech , taste adjust , Yadda Yadda, .Bubble Glass
22mm better Capacity , using unicorn bottles so not measured it yet ,
but at least should be 1-1.5ml more. Beauty Ring hiding ESG Skyline logo.
So be better suited for the one without Branding ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[ian91]

Now what a nice looking combo ,
Using the Included beauty ring with Ares mod.
75w , TC Mech , taste adjust , Yadda Yadda, .Bubble Glass
22mm better Capacity , using unicorn bottles so not measured it yet ,
but at least should be 1-1.5ml more. Beauty Ring hiding ESG Skyline logo.
So be better suited for the one without Branding ,

Sent from my ONEPLUS A3003 using Tapatalk

I went ahead and ordered a few of these from sweet-vapes. Can't deal with 3ml so hope it will get me up to about 4.5ml. Will see when it gets here!!

 

[benley73]

I went ahead and ordered a few of these from sweet-vapes. Can't deal with 3ml so hope it will get me up to about 4.5ml. Will see when it gets here!!

Its good that they fit TBH
Every extra ml helps with that constant refilling , especially here in uk with a 2ml max tank size ,

Sent from my ONEPLUS A3003 using Tapatalk
Measured out my juice with the cleito bubble glass , i got 5+ml i think 5.5ml but had a few drops already in , , so thats a good capacity now ,

 

[Bigbob2322]

I'm not liking the fact that after only 1 tankful my semi clear juice is now dark brown.

 

[mrjohs]

I'm not liking the fact that after only 1 tankful my semi clear juice is now dark brown.

I am wondering: Is that of any real consequence? I do notice a relatively "dark" flavor, but I think that was also present right after cleaning the whole tank and filling for the first time.

 

[benley73]

I'm not liking the fact that after only 1 tankful my semi clear juice is now dark brown.

Ive ran 4 tanks through the bubble tank on Skyline up to now after properly Cleaning out the inside top of the chamber removing the dark sludge after i had the dark turning juice,
Its down to build up on upper side of the chamber on mine, check the inner part next time you remove your deck
Keep that clean it will stop your juices turning ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

I went ahead and ordered a few of these from sweet-vapes. Can't deal with 3ml so hope it will get me up to about 4.5ml. Will see when it gets here!!

Takes it to 5ml plus on mine ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[Bigbob2322]

Ive ran 4 tanks through the bubble tank on Skyline up to now after properly Cleaning out the inside top of the chamber removing the dark sludge after i had the dark turning juice,
Its down to build up on upper side of the chamber on mine, check the inner part next time you remove your deck
Keep that clean it will stop your juices turning ,

Sent from my ONEPLUS A3003 using Tapatalk

This is the first tankful, received it yesterday.