Craziest RTA ever?

[mike_gr]

I understand where you're coming from. When I first started, I thought that big multi battery mods, huge builds and monster clouds was THE ultimate vaping experience. I sill love that.

However, nowadays I use anything from a pod stick to a stacked series tube and everything in between.

The point is there's no such thing really as THE ultimate vaping experience. That will vary from person to person. You have to find out what you like best and maybe there are several styles of vaping you'll wind up liking.

I would encourage you to maybe slow down a little and not assume right away that high power and monster vapor production is necessarily best.

For one thing it's ALOT more expensive vaping that way all the time.

I would start with any decent dual 18650 mod and any decent dual coil RTA. Truth be told there are relatively few really bad products out there. Pick yourself out some mod and RTA you like from the pictures and post them here before you buy them. You can get older stuff for dirt cheap that is still REALLY good.

Thank you!

Well I see what you are saying. I have tried some mtl and I own the hastur mini which is garbage. (at least for me). Around summertime I tend to vape more and I need something powerful. The zeus X clone that I have has zero flavor. I found the OBS engine 2 for dirt cheap and have been thinking about it together with a 2x18650 mod like the aegis legend or the aegis X 200w.

 

[mike_gr]

wow this feels like a highend converstation. i'm more into texture of cloud and flavour rather than size. as for warmth, it depends on the construction of the chamber and the coils, you can get flaming hot even from MTLing.

not sure where you are in your progress, but since you're already comfortable with rebuildables AND you're into juice guzzlers i'd just jump into RDA+Squonker. if you're willing to give singlecoilers a chance, i've heard Tauren Solo is a an airy beast for a single coiler. There's a ton more for a dual and/or single coil setup. Axial is a fan favourite, which acconmodates both settings without dams, and it's 10$ cheap.

only downside of this suggestion is, if you're going for high power you need dual batteries, which makes a big mod IMO. but factory chimnies of your kindred don't seem to mind

I used to have the Smok Beast king along with a 4x18650 mod from smok! LOL.... I mean I do mind if it's a 4 battery...but a 2 battery is better.

As far as drippers (rda) are concerned I was always against those... I mean I haven't used one ever but a friend of mine was dripping liquid ALL the time. I also have no idea what squonker is

 

[mike_gr]

I have the original Plus. By all accounts, the V2 is better. I like the plus a lot. You can swap out decks and try dual coil, series coil, mesh coil, etc. And, it can hold between 5ml and 20ml (I think) of eliquid depending on the configuration. It'll have the tiniest bit of overhang on the Legend (30.6mm across the top, but there's a lip of sorts), but it's manageable.

Sent from my SM-N960U using Tapatalk

Thanks!

Yeah that's what I saw in the pictures. It sat on it no problem. I mean the aromamizer 30mm on the legend.

How is it as far as flavor goes?

 

[mike_gr]

A local dealer recommended the reload rta. How about that??

 

[dc99]

What 2x18650 mod would you recommend for a 35mm tank?? Just asking... Is it a dual coil?

I really wouldnt as those tanks really dont perform at lower wattages. The 35 is probably minimun 3.5mm stags and should be 150-200w easy. Probably more like a 4S lipo DNA250C. Thats what the blue one is I posted above

 

[ShowMeTwice]

@mike_gr, check out the Atmizoo Tripod. Don't know how much you want to spend but it matches what you are looking for. Also a plus for you is Atmizoo is in Greece. I have a couple and love them. Excellent flavor and easy to build on. It comes with many options in the box for MTL-DL. Building on the Tripod is most similar to any of the recent Kayfun's (K5, Prime, KFL19).

Good luck with your search.

 

[mike_gr]

I really wouldnt as those tanks really dont perform at lower wattages. The 35 is probably minimun 3.5mm stags and should be 150-200w easy. Probably more like a 4S lipo DNA250C. Thats what the blue one is I posted above

I see. Thank you.

Probably it's too big for me. If only I could see it in person...

What about the 30mm? That must be ok with a 2x18650.

 

[mike_gr]

Here's a photo i borrowed from another thread. You can clearly see the aromamizer plus fitting the aegis legend perfectly.

I might even buy this colour combination. I think it looks really nice.

Any thoughts??

 

[virm]

 

[RigBick]

A 40mm Vapergate Mason Dumptank on the Aegis Legend.

No offense at all friend, but you don't sound like you have a ton of experience with vape equipment. A 30mm tank even, will overhang alot on an Aegis Legend.
View attachment 890651

Negative Ghost Rider. Aegis Legend with 31mm Steam Crave Glaz.

Looks like zero overhang from here. How does it look from there?

 

[gsmit1]

How does it look from there?

Looks like you're right I was just going by eye. I stand corrected.

 

[RigBick]

Looks like you're right I was just going by eye. I stand corrected.

Hope I did not come off sounding like an .... Peace and love to all.

 

[Dougiestyle]

Squonk with an RDA

 

[mike_gr]

Thank you for your replies.

I just ordered an aromamizer plus v2 advanced, an OBS engine 2 and an aegis legend 200w black along with some premade coils.

Let's see.

 

[gsmit1]

Hope I did not come off sounding like an .... Peace and love to all.

No worries friend.

 

[mike_gr]

@mike_gr, check out the Atmizoo Tripod. Don't know how much you want to spend but it matches what you are looking for. Also a plus for you is Atmizoo is in Greece. I have a couple and love them. Excellent flavor and easy to build on. It comes with many options in the box for MTL-DL. Building on the Tripod is most similar to any of the recent Kayfun's (K5, Prime, KFL19).
View attachment 890689
Good luck with your search.

Thanks man!

I finally decided to buy the aromamizer plus v2.

We'll see....

 

[Mordacai]

@mike_gr, you missed the Steam Crave Hadron mod.

Here's a few pictures with a 330ml can of Guarana Antarctica, which is a taste sensation.

It's a dual 21700 YiHi chipset mod that should provide more than enough power and current for low ohm builds, plus there's a Squonk addon that can be used with it.

It'll fit atomisers upto 36mm without any overhang as well, so the newly released Steam Crave Ragnar at 35mm is a perfect fit.

But yeah, you don't see many mods that are dual use. But more seem to be being released now, which is nice and kind of useful.

 

[mike_gr]

@mike_gr, you missed the Steam Crave Hadron mod.

Here's a few pictures with a 330ml can of Guarana Antarctica, which is a taste sensation.
View attachment 890771
View attachment 890773
View attachment 890775

It's a dual 21700 YiHi chipset mod that should provide more than enough power and current for low ohm builds, plus there's a Squonk addon that can be used with it.

It'll fit atomisers upto 36mm without any overhang as well, so the newly released Steam Crave Ragnar at 35mm is a perfect fit.

But yeah, you don't see many mods that are dual use. But more seem to be being released now, which is nice and kind of useful.

Thank you. I already researched about the hadron but it was unavailable at the colour i wanted it plus it was way out of my budget.

Maybe in the future.

For now I'll stay with the plus v2 and will invest if i see that i need something more.

Ordering from outside Greece is taking way to long for me to wait.

 

[Mordacai]

Well for future reference @mike_gr, fasttech has the cheapest price on the Hadron mods. No ideas why though.

But you could wait for when they have a sale or they allow you to use the code MAP at the checkout.

 

[mike_gr]

Well for future reference @mike_gr, fasttech has the cheapest price on the Hadron mods. No ideas why though.

But you could wait for when they have a sale or they allow you to use the code MAP at the checkout.

Thank you!