Cuboid 150W problems

[Jer213]

Hi all, I need some help. I just got a Cuboid 150W. Its my first mod I bought in a year. My other mod that a have is a sigelei 150W.

So the problem I'm having is that the Cuboid 150W wont go past 68.8 Watts in power mode and It wont stay in temp mode at all. I do not have this issue on my sigelei. I'm using dual coil Stainless Steel fused clapton 26/32 wire with 6 wraps around one of those little blue screw drivers. It omh's out at 0.11 My battery's are Samsung 25R. Is this normal for this kind of mod?

 

[Seesull]

That does sound weird. Have you contacted joyetech about it?

 

[Robert Cromwell]

68 watts may be all your batteries will do? Are these the same batteries you used in your Sigeli?

 

[Dreamer68]

Got one coming. Be keeping a close eye on this thread. Hope all works out Jer

 

[Robert Cromwell]

If the voltage from the batteries drops many mods will adjust their maximum output voltage/wattage accordingly.
Efests in there?

 

[Jer213]

This is a brand new set of Samsung 25R, I also tried a 1 month out set of Sony VTC5. Its still doing it. I don't know if its just this mod. All my battery's are fully charged and marred.

I gave up of the stainless build and put a kanthal clapton 7 wraps, 0.44 ohms and it goes to 184 watts.

Whats weird is that if I attach the kanthal build on and raise my wattage up then switch to the stainless build the second I screw the atty down it changes my wattage. So I'm pretty sure its a limitation in the software.

I guess I will email joytech.

 

[Robert Cromwell]

Yep sounds like it will no run at full wattage with the low resistance atty.

 

[smokinGAVIN]

I just got one for my wife today. It does go all the way to 150 Watts with Samsung 25Rs. It did fire with no issues.

 

[Zakillah]

Amp limit, maybe?

 

[PapaGeno21]

Sounds like a build problem with your coil? That's interesting.

 

[Jer213]

Yea its the stainless steel fused clapton wire, I just cant use it. Sucks I love that wire. I have tried 4, 5, 6 and 7 wraps.

 

[SteveSoft]

Yea its the stainless steel fused clapton wire, I just cant use it. Sucks I love that wire. I have tried 4, 5, 6 and 7 wraps.

Just so you know, I've had that kind of problems with SS Claptons on my VTC mini and DNA 200. Did not try with my Cuboid.

 

[zeezio]

Amp limit, maybe?

do you think so? his build on 68.+w is near 25a

 

[coilburner]

68 watts may be all your batteries will do? Are these the same batteries you used in your Sigeli?

The mod doesn't know what batteries you stick in it.

 

[Jim_ MDP]

nm

 

[Zakillah]

do you think so? his build on 68.+w is near 25a

iirc, the Amp limit actually IS 25.
If you want to push higher power, build around 0,3-0,4.

 

[Jim_ MDP]

Sounds like the spec limitations that make calling the Asolo "200w" a lie.
Unless you build within the 3 tenths of an ohm window that allows it.

That's-a-some spicy bollocks.

 

[Shipmister]

Try updating the firmware?

Samsung Galaxy s5

 

[Severed_Sanity]

Just be lucky yours worked out of the box. Mine wouldn't turn on unless I applied pressure to the door. I just hope when I get it back I will not find some other issue like this. I got this over the kbox because of the rave reviews of the Evic VTC. I just wanted 2 batteries.


Sent from my iPad using Tapatalk

 

[zeezio]

Try updating the firmware?

Samsung Galaxy s5

even if you upgrade it, 25A is the limit of cuboid