Customer and Product Support Thread.

Status
Not open for further replies.

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Even after all this time vaping I am still just a bit confused as to what ohm's work best with what battery strength.

For both hubby and me our favorite JDD is the simple CE3. Up until now the ones we use are the 2.4-2.6. We occasionally get the burnt taste. 'specially hubby. His go to device is his Go-Go tube mod w/18650 battery. Would it be better to use the 3.0-3.2 ohm?


I generally use 2.4 at 3.4-3.7v now but 3.0ohm was always my favorite with the Go-go battery and that is 3.7, so for me optimally it's 3.0ohms at 3.7volts, even though I keep finding myself slipping back to the Kanger T2's at 2.4.

It also has a lot to do with what you are using, in my experience it's not cut and dry, one product vapes better at 2.4ohms, another at 3.0ohms. And some liquids perform better, I am not new at this and I am still trying to get a handle on it, so don't despair, it's trial and error on most products.

I would recommend you give the higher ohms a try, the Go-go is set at 3.7 (that mod you have) it would probably perform better

Hey. Sorry to be a bug, but I'm interested to find out what's going on with SmokTech ViVi replacement coils. I can't find them anywhere and I feel like it's been forever since they were in stock. What's going on?
Thanks!

I have had those in stock for almost a month now, just ran out I think a few days ago, :( so there wasn't a shortage at my site until recently that I am aware of, but smoktech has also been behind in their shipments like the other manufacturers that's probably why you couldn't find them. I do have them on order, so should be back soon.
 

mattiem

ECF Guru
ECF Veteran
Verified Member
I generally use 2.4 at 3.4-3.7v now but 3.0ohm was always my favorite with the Go-go battery and that is 3.7, so for me optimally it's 3.0ohms at 3.7volts, even though I keep finding myself slipping back to the Kanger T2's at 2.4.

It also has a lot to do with what you are using, in my experience it's not cut and dry, one product vapes better at 2.4ohms, another at 3.0ohms. And some liquids perform better, I am not new at this and I am still trying to get a handle on it, so don't despair, it's trial and error on most products.

I would recommend you give the higher ohms a try, the Go-go is set at 3.7 (that mod you have) it would probably perform better

Thanks Eric. I will get some ordered.
 

Takoda

Senior Member
ECF Veteran
Verified Member
May 22, 2012
106
54
43
pennsylvania
My iTaste MVP has been having some issues. When plug it in to recharge the green light never goes out. No matter how losng I charge it the green light stays lit and the device gets very hot to touch. I am worried that the internal battery may be faulty. This just started happening a day ago. I have been using it the way I always do. Nothing has happened to the device that can explain its behavior. I am really hesitant to continue using the device. Can you please help me resolve this issue if possible??
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
My iTaste MVP has been having some issues. When plug it in to recharge the green light never goes out. No matter how losng I charge it the green light stays lit and the device gets very hot to touch. I am worried that the internal battery may be faulty. This just started happening a day ago. I have been using it the way I always do. Nothing has happened to the device that can explain its behavior. I am really hesitant to continue using the device. Can you please help me resolve this issue if possible??

Hi

please email me with your order details.

orders@discountvapers.com

we'll get it sorted.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
I'm sure you've probably already answered this but the site is so very slow that it's taken me almost 20 minutes to go thru 3 pages lol. I wanted to know when you will possibly have some more 1.8ohm Kanger protank coils back in stock? I'm also very sorry if you've already answered this :D

I have two very large orders with Kanger and I have also inquired with an "official" partner, one way or another they are coming as fast as I can possibly get them. I do not have a solid ETA, but I am hoping for late next week.

I have all the evods coming early next week, then the protank again.

(note: no worries on the partner I have already confirmed with Kanger that they are genuine)

I know this site has been really slow... right, not just me I suppose.
 

AngelsBreath

Ultra Member
ECF Veteran
Mar 15, 2013
1,908
13,335
Alabama, United States
I have two very large orders with Kanger and I have also inquired with an "official" partner, one way or another they are coming as fast as I can possibly get them. I do not have a solid ETA, but I am hoping for late next week.

I have all the evods coming early next week, then the protank again.

(note: no worries on the partner I have already confirmed with Kanger that they are genuine)

I know this site has been really slow... right, not just me I suppose.

Thank you so very much, I only want to order them from you. You always send really fast and you have the best prices around. But...the biggest reason is this, I trust your site. :D Thanks so much for replying, wonderful service.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Thank you so very much, I only want to order them from you. You always send really fast and you have the best prices around. But...the biggest reason is this, I trust your site. :D Thanks so much for replying, wonderful service.

Thank you, words like that make this all worthwhile :)
 
Status
Not open for further replies.

Users who are viewing this thread