DO NOT BUY THE 2.5 E2 rev 4 510 reg carto

[samsmom]

Can you tell me the difference in the 2.5 and the 3 ohm as far as taste, heat, vapor, etc?

TIA!

 

[Bigbuyer]

Yes and Yes.

The 2.5 ohm E2's are better for eGo and other 3v mods. The 3ohm is better for high voltage like 5v and 6v.
The lower the ohm the hotter and the more vapor you generally get.
I think you should choose your ohm level based on your mod voltage.

 

[samsmom]

Thanks! I have an EGO and a RIVA so it looks like the 2.5 is my best bet!

 

[Dr Fred]

I'm happy with 3 ohm xl r4's on 3.7 volts FWIW
Pull all the rings out,quick everclear rinse,dry burn
Drip fill,put just the middle ring in flat side down and use a drip tip.
No leaks,easy fill,works for me.
Thanks for getting these in 3 ohm Bruce!!

 

[bobrez]

Now back in stock on E2 Version 4 2.5 ohm!
In 510 Regular Black and Steel
In 510 Mega XL Black and Steel
In KR808D Regular Black and Steel
In KR808D Mega XL Black and Steel
and the 60ml Filler Bottle

Lots of 3ohm E2 V4's also!
All at COV!

I luv u Man 0.o

 

[dannoman]

Bruce I have been using the 3ohms XL's you sent me with my eGo and they are fine...and probably a safer bet that the 2.5 ohm cartos...they seem to have less of a tendency to build up burn crud at the coil...

I am loving mine but may decide to go back to regular size on 3ohm as I am suspicious of the wicks in the XL not reaching all the way to the bottom of the longer carto tube...

Yes and Yes.

The 2.5 ohm E2's are better for eGo and other 3v mods. The 3ohm is better for high voltage like 5v and 6v.
The lower the ohm the hotter and the more vapor you generally get.
I think you should choose your ohm level based on your mod voltage.

 

[Big Hitter]

Been loving my 3Ω shorties, as long as you soak and dry burn BEFORE you use them.

I will say, I think the 2.5Ω are better for eGos @ 3.2 or whatever they are.
But my true 3.7 mod runs the 3Ω ones perfectly.

I have 16 new ones in my ammo case, but I feel the need to bump that up by another 30 or so

 

[hairball]

White vinegar will also remove the primer taste. This is what I use to clean mine. The acid in vinegar will eat it off. Just a thought.