Dominus Mods Club

[Kang]

Nice!

I had the same concern when screwing the top cap down. Now I take it apart from one of the modular pieces and it doesnt seem to grind AS bad… This is definitely my hardest hitting mod by alot now. In it's original form, it was perfect for my kayfun but kinda dropped on the drippers. I have yet to take out one of my other mods since I installed this button. It's an amazing piece by an amazing mod maker for sure. Most prized mod in my collection.

 

[COM76]

Nice!

I had the same concern when screwing the top cap down. Now I take it apart from one of the modular pieces and it doesnt seem to grind AS bad… This is definitely my hardest hitting mod by alot now. In it's original form, it was perfect for my kayfun but kinda dropped on the drippers. I have yet to take out one of my other mods since I installed this button. It's an amazing piece by an amazing mod maker for sure. Most prized mod in my collection.

Good tip about the screwing from the modular connection. I considered this also but thought i may have not installed the post correctly. Since then i took the post apart and installed it again. Perhaps the spring will also lose a bit of tension over time. Like i said before i guess i am being picky. Wishing i had picked up an engraved 650 tube - also wishing David would make an engraved 18500 tube as i mostly use that size when i am out of the house. I only have ever owned about 3 drippers but i cant seem to fall in love with them. I just am lazy i guess and prefer not having to carry a bottle around and bother to drip when i am laying on the couch or bed. I made do when there were only 510 atomizers to drip with back in the day but i cant seem to go back to the habit happily. When i get some time i may get around to testing out that scene again. I do like the look of that dripper on the dominus though.

 

[Kang]

Dominus in 18350 mode + Kayfun is the ultimate ninja set up. I am now debating on either the 18650 tube or a nano kit and low profile top cap… DECISIONS!!!

The quasar looks solid on there… it's definitely a nice compact RDA.

 

[COM76]

Dominus in 18350 mode + Kayfun is the ultimate ninja set up. I am now debating on either the 18650 tube or a nano kit and low profile top cap… DECISIONS!!!

The quasar looks solid on there… it's definitely a nice compact RDA.

I got a couple of different nano kits - one was from a retailer in Australia (dont remember what they call it) - the other was from fasttech. Both have been a great upgrade and have taken a further 10mm off the kayfun - they both hold around 2ml - 2.5ml which is what i tend to go through during 24hrs. Honestly ill get a 18650 tube as well, just so i can have the set. I think David may still be working on a bottom switch which will in turn make the mod smaller in 18650 anyway.

 

[Grrrr]

When he's finished with the dripper he's going to begin developing a tank for it.

 

[COM76]

When he's finished with the dripper he's going to begin developing a tank for it.

Yeah mate - heard this as well. Last i heard it may implement the dripper with the tank. This would be a brilliant setup. Hope it all works out.

 

[Kang]

I put my order in for the tube last night. David said that the upgrade further reduces voltage drop going from .21 (with just switch) to .15!!!

He also told me about a possible hybrid conversion for 18mm batts and developing concepts for 26650 conversion.

David is a busy dude! I think the drippers are coming next in a very limited run.

 

[BTerry]

Made a hybrid adapter for my dominus, (see pic on page 11) Bought it off the classifieds and it came w the Kayfun 3.1 adapter.

If you take the pin & delrin piece out of it, it is 510 threaded
so 10 minutes on a grinder and your good to go (ground it down till the threads)

Love the switch update

 

[COM76]

Made a hybrid adapter for my dominus, (see pic on page 11) Bought it off the classifieds and it came w the Kayfun 3.1 adapter.

If you take the pin & delrin piece out of it, it is 510 threaded
so 10 minutes on a grinder and your good to go (ground it down till the threads)

Love the switch update

cant seem to click on the hyperlink mate

 

[Grrrr]

cant seem to click on the hyperlink mate

Try this one

Vaperev Shop - Accessories - Dominus Mods - Mechanical - Devices

 

[Kang]

Made a hybrid adapter for my dominus, (see pic on page 11) Bought it off the classifieds and it came w the Kayfun 3.1 adapter.

If you take the pin & delrin piece out of it, it is 510 threaded
so 10 minutes on a grinder and your good to go (ground it down till the threads)

Love the switch update

So you used the 3.1 adapter to make a hybrid cap that works with other rba's ?! SICK!

I don't think I'd have a way to grind it down though ><!

 

[Kang]

Joined yall's club #160

That looks so sick dude.

 

[Kang]

Here's my dominus with the 650 tube.

 

[COM76]

Great pic Kang - all set for the Apocalypse then - everything is becoming banned here in Australia. Businesses are shutting down, people are getting fined. Its all getting a bit crazy. Hope you guys over there will not receive the same problems.

 

[Kang]

Great pic Kang - all set for the Apocalypse then - everything is becoming banned here in Australia. Businesses are shutting down, people are getting fined. Its all getting a bit crazy. Hope you guys over there will not receive the same problems.

Wow man I'm really sorry to hear that. Are you stocking up on DIY juice supplies??

I hope they're banning cigarettes too then….

 

[jers]

i rarely use my dominus since i bought it, my usual coil builds are .6 to .2 on a dripper the switch really gets hot, i guess its time to get the upgrade.

 

[Kang]

i rarely use my dominus since i bought it, my usual coil builds are .6 to .2 on a dripper the switch really gets hot, i guess its time to get the upgrade.

Do yourself a favor and do it man. You will not be disappointed. I don't super sub-ohm but I've ran a .42 build on it and each pull is hard hitting and consistent every time. The solid tube supposedly reduces voltage drop and no bs… I noticed the difference. Def gonna have to go to 3mg of nic when I'm using the dom now lol

 

[COM76]

Wow man I'm really sorry to hear that. Are you stocking up on DIY juice supplies??

I hope they're banning cigarettes too then….

So far we still are able to import personal use nic. I dont have a great deal tucked away but i have about 500ml of 100mg unflavored nic in the freezer. As for flavorings i can mix up my own if need be. Some say customs are seizing high quantities of nic. As for the devices - new laws saying anything that resembles a cig is illegal to have or to be sold. The laws are slowly getting worse. In fact its illegal to even import nic at all in the state of Queensland (where i live) but i am close to the border so no problems yet.

 

[armoworrior]

when is the dripper coming out anyone know?

 

[Kang]

when is the dripper coming out anyone know?

David said a small run of RDA's is in line but that he's working things out with a CNC shop. We might see the hybrid convertor and other tube options before then… I'm not sure though.

As soon as that RDA drops I'm snatching it up quick and recommend you guys do too.