- Status
I try to stick with 70/30 whenever possible. it works in RDA's and tanks alike without any wicking issues.
I make a 70vg 30pg, 3mg base. After mixing my flavors in, I end up anywhere between 60vg 40pg to 80vg 20pg depending on which flavors are used.
I mix at 35% PG/65% VG with 3mg nic. I found anything higher than 65% VG and I get phlegm-y.
I DTL anywhere from 0.20 ohms to 0.50 ohms. My day-to-day RTA's are Lemo 2's but I have a couple of others I use regularly as well.
Did I win?
I DTL anywhere from 0.20 ohms to 0.50 ohms. My day-to-day RTA's are Lemo 2's but I have a couple of others I use regularly as well.
Did I win?
I forgot about the flavors, most of mine are pg, I guess by the time I add the flavors I've increased the pg a few percent.
I don't make my own but I vape 70vg/30pg 6mg nic. That being said I just ordered a bottle that only came in 85vg/15pg 6mg nic. Might have to mix that with something else to lower the vg.
I mix max vg/dw 6%, only pg comes from flavors and 8mg nic. Ratio lands between 85-73vg.
I make my own and do 80 vg 20 pg with 6 nic.
Max vg or 70 vg minimum for me. I'm generally running a .2 to .25 dual coil setup around 70 watts in an rta or rda. I'm not a fan of throat hit or pg in general, although I want a little throat feel... I go for high vapor production and flavor.
I only use commercial juice and it's usually either 80/20 or 70/30 depending on which brand juice I'm using, and both of those work fine for me.
Most of the time I use a .5 ceramic coil at anywhere from 25-30 watts.
Most of the time I use a .5 ceramic coil at anywhere from 25-30 watts.
Normally 70-75 vg, but max in the RTAs ( helps avoid leaking due to my less than stellar skills).
You're doing very well with your building. Caught onto the wicking faster than I did. Don't let that go to your head tho, took me quite some time to be able to look at an rta deck and know what wick style might work best.
3mg/ml - 10PG flavoring or 3PG Flavoring - Max VG with 3%-5% DW
Dual SS430 .12Ω - .14Ω - 40W-50W
Currently halfway through 100ml of 3mg/ml unflavored Max VG w/5% DW
Dual SS430 .12Ω - .14Ω - 40W-50W
Currently halfway through 100ml of 3mg/ml unflavored Max VG w/5% DW
Last edited:
It took a few days to get used to it compared to saline.
I tried some saline juice after I got used to the DW and it's too salty now. dur.
DW is 75% or more cleaner than saline (less coil crud) so win win.
The 0pg unflavored was an experiment to see what's been giving me flaky skin on my face. It cleared up after 4 days so I washed and refilled my other tanks. I blew the water out after washing/shaking them and dawn broke over Marblehead.
I usually wash my tanks every refill so that I'm using fresh juice in a clean tank.
Unflavored is zero crud so just vape, refill, repeat. No need to wash.
I think the dry skin could be from blowback from blowing out the last few drops of water after washing and shaking out my tanks. I think there's enough juice left in it to affect my face. When I got blowback I just wiped my face with the clean towel not wash. I wash my hands & face a few times a day but not enough if I'm getting juice on me.
Either that or I need to rub gatorade on my knuckles.
Last edited:
Hey, I just watch videos, see how others wick them. So far, the Fancier is my fave because there’s no guessing how long a tail to cut. You pull them up through, and cut them level. There needs to be enough cotton to fill the channel and no more. Easy peasy.
50/50 3mg at ~50W at various resistances (0.95 ATM, but who cares)
I diy everything and more VG makes juices taste awkward to me.
I diy everything and more VG makes juices taste awkward to me.
- Status
Similar threads
- Locked
