Sounds great - if you need an English beta-tester, please let me know.
And, of course - the very best of luck!
And, of course - the very best of luck!
- Status
I know what it is! Its a special computerised container that creates a vacuum around the atomiser and adds freon or whatever so the atomiser can get mega hot like a lightbulb without dying! It then complicatedly filters out the freon (or whatever) from the vapour and pumps the vapour out of its tube end!
It also has an optional attachment to revitalise atomisers! Using pulses of atomiserly theraputic electrical waves (that 901 atomisers in particular enjoy) it helps to promote a healthy balance of voltage and non-cruddyness of fibre core for your treasured atomiser!
After the electrical waves pass, 901s will enjoy bathing in the special substance, warmed gently up to 100*C where they will be boiled for a short while and then steamed and left to dry slowly for 24 hours after which they will be primed. Its then onto the painting module which repaints your atomiser in whatever colour you like. It then goes through a final diagnostic test where it burns off some of its primer liquid, is put into debug mode and given certain commands to make it behave good, rebooted and left to rest before being used again.
Please note that atomisers will eventually wear out even with this cycle. In which case, you need the atomiser new-coil and wick stuffer module wicks and coils sold seperately.
It also has an optional attachment to revitalise atomisers! Using pulses of atomiserly theraputic electrical waves (that 901 atomisers in particular enjoy) it helps to promote a healthy balance of voltage and non-cruddyness of fibre core for your treasured atomiser!
After the electrical waves pass, 901s will enjoy bathing in the special substance, warmed gently up to 100*C where they will be boiled for a short while and then steamed and left to dry slowly for 24 hours after which they will be primed. Its then onto the painting module which repaints your atomiser in whatever colour you like. It then goes through a final diagnostic test where it burns off some of its primer liquid, is put into debug mode and given certain commands to make it behave good, rebooted and left to rest before being used again.
Please note that atomisers will eventually wear out even with this cycle. In which case, you need the atomiser new-coil and wick stuffer module wicks and coils sold seperately.
Thanks all for the reponse..I will post pics soon....please be patient...it still looks very rudimentary at this stage but the idea is to divert away from traditional cigarette looks....watch this space...need to get few things done first....thanks again guys and gals....
Holy christ..your ideas and creativeness is way out of my league...hahahaa
but nontheless something similar...but much simpler...
OH I CAN'T WAIT ANY LONGER -
Whip out that digi camera and post a couple pics -
PLEASE - PLEASE
The picture below will show the first prototype(built yesterday)...it will look crude and primitive at this juncture of time...I am already sourcing other refinements in this current model....
Pic 1: Attached to the wires is a Atomiser(penstyle) from Njoy..Incidentally , the atomiser now performs very well with its original battery after going thru a session with the E-turbo..it has shown to be able to revive old weakened atomiser after using the atomiser with the E-turbo.....
Pic 2: it self explanatory...portability...I will try to post a picture in my hand and using it later on....
Pic 1: Attached to the wires is a Atomiser(penstyle) from Njoy..Incidentally , the atomiser now performs very well with its original battery after going thru a session with the E-turbo..it has shown to be able to revive old weakened atomiser after using the atomiser with the E-turbo.....
Pic 2: it self explanatory...portability...I will try to post a picture in my hand and using it later on....
super interested in how it manages to revive bad atts jim, but perhaps you should keep that privy while you work out the patent. you are going to sell a million !
Interesting! It looks real nice but the "cigarette look" is very important for me. Why don't construct one penstyle with two atomizers one after the other?
thanks DC...I'm doing that now..in contact with my lawyers.....
sorry ,the pics doesn't say volumes yet..need to do video to demo it's uses and capabilities.....hope you all are patient enough...I got 3 more units to be constructed today...running out of parts as well...
Hi .....I am diverting it away from the Ciggie looks/appearance for a reason and also to do away with the old traditional ciggies looks...You can't imagine the amount of attention I have gathered since I started using it in the public's..lots and lots of questions from the public and more of them says it does not resembles cigarettes at all and more relating it to a medical device...that's what I want....I hope...
great to see you back, inventive as always!!! congrat! looking forward for description
is there a batterypack? size is very good! some similarity with http://www.e-cigarette-forum.com/forum/tips-tricks/3331-usb-mod-v2-done.html?
is there a batterypack? size is very good! some similarity with http://www.e-cigarette-forum.com/forum/tips-tricks/3331-usb-mod-v2-done.html?
Am I missing something
How does it re-vitalise an atomizer - does a higher voltage/current burn the crud off them so they work a little better?
Hi eyespy...not only as an external battery pack but also able to restore back the original (or even boost) the performance of your existing atomiser( I can't tell you all now..patent pending..sorry
) and multi adaptors connectors for the variables of atomiser out there.......I will give a summary later as I get my things together.....I am still testing it here.....further refinements has been made ..A jog dial will be added for more controllable power ...I'll explained that later and as well as addition of proper "auto-off switch"..I was debating upon insertion of sensors but I realised the sensors can cause some problems(like what happens to K.I.S.S. idea..it get more complicated......)...hope patience will prevail....thanks all for feedbacks..and I need more..critics are welcomed
Last edited:
great to see you back, inventive as always!!! congrat! looking forward for description
is there a batterypack? size is very good! some similarity with http://www.e-cigarette-forum.com/forum/tips-tricks/3331-usb-mod-v2-done.html?
Hi vafvaf..been a long time my friend....glad to see you like it and thanks for your ever encouraging support.....wish I can let all of you try..lots of people tried it out today....getting lots of feedbacks and I have already started selecting Beta-testers....
Also thanks TB for egging me on....
Last edited:
Hi Ned..close but no cigar..hehe..sorry have to keep all under wraps now.....wait till you see my design for reverse atomisers..hehehe, thats another shocker.....
Now where's my ultrasonic electric toothbrush gone to he he he. Now If this can revive my Janty atomisers you are a star. As I have found no cleaning solution that works with these. But hit and miss on other models
..It has revived both my Janty atomisers and also my 7 months old (version 1) njoy atomiser as well....all together so far I have revived more than 23 units till date...all revival takes about 2 to 3 minutes plus some needed some "scratching " on the head to get the rust off..hehehe- Status
Similar threads
