Easiest/best rebuildable atomizer for a Provari V2?

[time2quit]

Hey guys. I've been out of the game for about 6 months. My last device was a Reo Grand with a reomizer 2. That was the only rebuildable I'd ever built coils for.

My question...I just bought a Provari V2. Is there a rebuildable atty that is simple, not too expensive, and works well on a Provari? Remember...simple! Lol

I apologize if this has been covered already. Your help is greatly appreciated!

 

[nomadicwookie]

I just got an atomic clone for about $28. Pretty easy to build on. It doesn't quite screw all of the way down on my provari. About a 1-2mm gap, but looks pretty good.

 

[Blackboar]

I love my Kayfun Lite+ on my Provari mini. Built a chimney coil to 1.6 ohms and vape it at 4.0v with a 50/50, 18mg blend Moo juice from MBV. The KFL+ is $99.

My other topper is a Smoketech Pyrex RSST. Built a 1.6 ohm coil on a hollow #400 stainless steel mesh wick. I also run this at 4.0v with a 50/50, 18mg blend Freckled Lemonade from MBV. The RSST is $35. Definitely consider drilling out the air hole for the RSST. I drilled mine's to 5/64.

 

[Jugband]

I have an Omega as well as a Kayfun lite. I can highly recommend either. Either works great on the Provari, and both so easy to build.

 

[serenity21899]

I'm am still a novice at rebuilding, but I can handle a Kayfun or KFL. Clones can be had for a good price.

 

[time2quit]

I'm am still a novice at rebuilding, but I can handle a Kayfun or KFL. Clones can be had for a good price.

Susieq...you've used this on a provari? Aside from fastech, where can I get one of these RBA's for a good price? Thank you!

 

[Fir3b1rd]

I know fast-tech has them both REALLY I expensively;I'm scanning the web big time trying to find one that won't take a month to ship.
Same boat as you- provari looking for a good RBA



Sent from my iPhone using Tapatalk

 

[serenity21899]

Susieq...you've used this on a provari? Aside from fastech, where can I get one of these RBA's for a good price? Thank you!

Yep. I got two of them from local vape shops, and one from:

Kayfun Lite Plus Clone by EHPRO - Eciggity

I have a Kayfun 3.1 from EHPro and a KFL from Tobeco. I just ordered that one from eciggiy today. From what I have read on the forums, these versions are virtually issue-free, while the ones from FastTech vary greatly. I have no issues with the 2 I actually have in my possession.

The ProVari can handle coils 1.3Ω and above.

ETA: If you need more help, come visit the ProVarinati thread. Many of us there have them, and use them on ProVaris on a regular basis.

http://www.e-cigarette-forum.com/forum/provape/542892-provarinati-saloon.html

 

[Fir3b1rd]

Yep. I got two of them from local vape shops, and one from:

Kayfun Lite Plus Clone by EHPRO - Eciggity

I have a Kayfun 3.1 from EHPro and a KFL from Tobeco. I just ordered that one from eciggiy today. From what I have read on the forums, these versions are virtually issue-free, while the ones from FastTech vary greatly. I have no issues with the 2 I actually have in my possession.

The ProVari can handle coils 1.3Ω and above.

ETA: If you need more help, come visit the ProVarinati thread. Many of us there have them, and use them on ProVaris on a regular basis.

http://www.e-cigarette-forum.com/forum/provape/542892-provarinati-saloon.html

I saw the "squape" on that ecogcity site ... I actually really dig the exterior look of that one. Do you know is that another Kayfun clone type of RBA? Or something totally different?
I wanna stick with a Kayfun got to try it and the taste from it is amazing. I just dig that cage the squape appears to have Round the glass


Sent from my iPhone using Tapatalk

 

[time2quit]

Yep. I got two of them from local vape shops, and one from:

Kayfun Lite Plus Clone by EHPRO - Eciggity

I have a Kayfun 3.1 from EHPro and a KFL from Tobeco. I just ordered that one from eciggiy today. From what I have read on the forums, these versions are virtually issue-free, while the ones from FastTech vary greatly. I have no issues with the 2 I actually have in my possession.

The ProVari can handle coils 1.3Ω and above.

ETA: If you need more help, come visit the ProVarinati thread. Many of us there have them, and use them on ProVaris on a regular basis.

http://www.e-cigarette-forum.com/forum/provape/542892-provarinati-saloon.html

Outstanding. Thank you!

 

[serenity21899]

I saw the "squape" on that ecogcity site ... I actually really dig the exterior look of that one. Do you know is that another Kayfun clone type of RBA? Or something totally different?
I wanna stick with a Kayfun got to try it and the taste from it is amazing. I just dig that cage the squape appears to have Round the glass


Sent from my iPhone using Tapatalk

I don't actually know anything about the Squape.

 

[Fir3b1rd]

I don't actually know anything about the Squape.

K thank you


Sent from my iPhone using Tapatalk

 

[Coldpunk]

The Squape with Loki Lab Pro Ring is the best/easiest topper for the Provari. With its ematal coating it's much easier to build on compared to the kayfun's easily meltable insulator.

Once they give it airflow control it will be better than the kayfun.

 

[rrayda]

Check out the Cyclone AFC...it looks like it was made for a ProVari. Not my picture, but you get the idea.