eGo and 808 clearos that work on the X2 battery (revisited)

[Garemlin]

Well I gotta say it looks like the T3 mini is a winner so far. Filled it up with my Kahlua/Irish Creme mix popped it on my new spinner and set it just a click above 3.8v and taste and vape is great. Not super warm like a top coil but much warmer than the standard T3. Also tried it on my regular 900 X2 and works good as well. Gonna give it a few days trial but looked like I may order some more if this one works out good.

 

[awsum140]

I've found that a Kanger T2 fits directly onto an X2 and works every time, at least the two I have work on all my X2s and a Spinner I just got. They are kind of big, about the size of a T3, but the coil/wick assembly is replaceable.

 

[Grimwald]

I just receive the Triton to test...didn't get any replacement coils. I'm just 1/2 way thru, but it works good so far. Really warm and pumps out a lot of vapor. I'm going to need a few days to evaluate it. I'm a tad concerned with the wicks...much larger and fluffier (is that a word) than the wicks in the X2. I love the X2...I'm a top coil with wicks kind of guy...so here's hoping these work.

BTW, I tried the Triton on a regular ego...screws on but doesn't fire...so I wonder if a regular T2 would fit on an X2 batt.

 

[awsum140]

Grim, the T2 has worked for me on an X2 with n problems at all and has also worked on my Spinner. Directly threads on without any problems.

 

[Grimwald]

Grim, the T2 has worked for me on an X2 with n problems at all and has also worked on my Spinner. Directly threads on without any problems.

That's great to know. Since the Triton is still working great, I'll probably order some straight T2s to use on my ego/510 stuff...and cross compatible with X2s...what could be better.

 

[dr_mah]

Hi Everyone...I've been a "lurker" for many months, this is my 1st real post to any thread. Hopefully any info I can contribute will be a small help to someone the same way I've been helped anywhere I've turned to throughout the forum. Just a wonderful place with lot of terrific, awesome folks throughout. That being said, here goes...

I've found that the new Vision Victory 2.0 ml tank will attach directly to the Volt Spinner and works, well too! I got this a week ago, it's listed as a 510 device and it uses standard ego outer threading to attach. I have an 808 to eGo/510 adapter and was totally prepared to use that. But after examining the tank, the battery connector post on it looked the right length to make a good connection. So I gave it a shot, screwed it on (finger tight only, don't crank it!) without the adapter, started vaping and it works! Only minor thing is that there is a small 1/16 in gap between the bottom of the tank and the battery skirt, but the setup still looks good (posted a pic of it so you can see) and it's a good solid connection too. I was using the Vision Mini Vivi with an 808/510 adapter, liked that a lot, but this new tank certainly looks better and the performance of it is superb, excellent flavor and vapor, and no adapter required. I own 4 Volt Spinners, a 650, 2 900's, and a 1300 and it works well on all. If the X2 battery head's the same as the Spinner and I'm sure it is, should work on that too no problem.

There's a new Vision Victory bottom coil tank out now too (also eGo threaded connection), it's much larger (5ml), can't speak for that one since I didn't buy it, don't like bottom coil or large tanks like that.

(Attached pic of the Vision Victory 2ml on a 900mah Spinner)

 

[Jingles]

I have a Vision Victory Tank 2.0. I just tried it on an X2 and it does work. I hadn't thought to try it on my Volts, so thanks for the tip jazz_addict. I too like this tank. It produces great flavor and vapor. Great post too jazz_addict. Keep up the good work!

 

[dr_mah]

I have a Vision Victory Tank 2.0. I just tried it on an X2 and it does work. I hadn't thought to try it on my Volts, so thanks for the tip jazz_addict. I too like this tank. It produces great flavor and vapor. Great post too jazz_addict. Keep up the good work!

You're Welcome Jingles and Thank You! Knew the X2 had to be the same, why would it not...Think about it, this Victory tank is basically just a reworked mini, kinda neat everything is swappable between the 2...will especially keep the mod users happy who may use the 2 and want to keep the 510 connection. Seems Vision is getting into the concept of interchangeable parts like I see with the Kanger products, and that's good. I like the looks of the device, and I find the flavor slightly better than the mini. One big difference between the 2 is the longer coil length of the Victory, does that do it? Who knows, I like it, happy it works on my Spinners, it's my new go-to tank until the next latest and greatest happens, never ends with this, as we know....

 

[cindycated]

Hi Everyone...I've been a "lurker" for many months, this is my 1st real post to any thread. Hopefully any info I can contribute will be a small help to someone the same way I've been helped anywhere I've turned to throughout the forum. Just a wonderful place with lot of terrific, awesome folks throughout. That being said, here goes...

I've found that the new Vision Victory 2.0 ml tank will attach directly to the Volt Spinner and works, well too! I got this a week ago, it's listed as a 510 device and it uses standard ego outer threading to attach. I have an 808 to eGo/510 adapter and was totally prepared to use that. But after examining the tank, the battery connector post on it looked the right length to make a good connection. So I gave it a shot, screwed it on (finger tight only, don't crank it!) without the adapter, started vaping and it works! Only minor thing is that there is a small 1/16 in gap between the bottom of the tank and the battery skirt, but the setup still looks good (posted a pic of it so you can see) and it's a good solid connection too. I was using the Vision Mini Vivi with an 808/510 adapter, liked that a lot, but this new tank certainly looks better and the performance of it is superb, excellent flavor and vapor, and no adapter required. I own 4 Volt Spinners, a 650, 2 900's, and a 1300 and it works well on all. If the X2 battery head's the same as the Spinner and I'm sure it is, should work on that too no problem.

There's a new Vision Victory bottom coil tank out now too (also eGo threaded connection), it's much larger (5ml), can't speak for that one since I didn't buy it, don't like bottom coil or large tanks like that.

(Attached pic of the Vision Victory 2ml on a 900mah Spinner)
View attachment 226137

haha, that extra 1/16" is for the o-ring that holds your bling dangler charms!

Nice find - how's the draw? Is it as airy as the T3?

 

[dr_mah]

haha, that extra 1/16" is for the o-ring that holds your bling dangler charms!

Nice find - how's the draw? Is it as airy as the T3?

Hi there Cindycated...I have tried a T3, that's how I discovered bottom coil just isn't for me (oops, did I say that?)...the draw with the VT is not as airy as that, a little tighter but still smooth and easy airflow, it's comfortable. The VT has 2 airholes as the T3 does, at least the one I used did. It is comparable to the Mini Vivi draw if you've tried that.

Being the man I am, can't say I know what those bling danglers are, jewelry maybe? If so, have at it, put that 1/16 inch to good use!

 

[cindycated]

Awesome. I was hoping you'd say that. I love SI's bottom coil cartos, but I hate T3s. I like the convenience of quickly filling a T3 and running out of the house, but I spend the whole rest of the day kicking myself every time I do that. Trying the mini T3 next, but I have a feeling I won't really like that either. So hmmm, maybe I'll give these VTs a try...unless Imagine announces SI carto tanks!

See that? It would be perfect with these!

 

[Grimwald]

Just got standard T2s in...they do work on the X2...leaves a little 1/4" or so gap...but it does work.

 

[greasemonky89]

Vapor4life has carto tanks that are 808 thread then all that would be needed is a spacer ring or something to cover the gap.

A wrench in one hand and my PV in the other.

 

[dr_mah]

Awesome. I was hoping you'd say that. I love SI's bottom coil cartos, but I hate T3s. I like the convenience of quickly filling a T3 and running out of the house, but I spend the whole rest of the day kicking myself every time I do that. Trying the mini T3 next, but I have a feeling I won't really like that either. So hmmm, maybe I'll give these VTs a try...unless Imagine announces SI carto tanks!

See that? It would be perfect with these!

Ain't that cute, certainly a lady's touch for sure....queen of hearts too, that true? (haha)...only thing to make that setup any cuter would be a nice light pink VT tank on top of that battery (gotvapes got em!)...try one out, I think you'll like it...waiting on Imagine to announce carto tanks could be like watching grass grow, your not the 1st person to inquire about that, I think it would be a nice addition to the lineup for those so inclined...better hurry, those pinks are moving fast! For me, now to work!....

 

[Njt07]

With the vision nanos, both the 510 version and the 808, you have to take a few primer draws while it is disconnected from the battery and with your finger on the bottom to plug the airflow. This primes the coil chamber then you don't get that nasty taste. This is on the first fill only. I'm not sure what the inside of the coil chamber looks like but id guess it has a bit of filler in it that you have to saturate first fill other wise you intially burn the wick and possibly the filler ruining the clearo.

 

[cindycated]

Ain't that cute, certainly a lady's touch for sure....queen of hearts too, that true? (haha)...only thing to make that setup any cuter would be a nice light pink VT tank on top of that battery (gotvapes got em!)...try one out, I think you'll like it...waiting on Imagine to announce carto tanks could be like watching grass grow, your not the 1st person to inquire about that, I think it would be a nice addition to the lineup for those so inclined...better hurry, those pinks are moving fast! For me, now to work!....

haha, I'm more of a skulls and dragons girl myself! Not really that girly, but you take the google images you can find!

 

[cindycated]

Just got standard T2s in...they do work on the X2...leaves a little 1/4" or so gap...but it does work.

That would take A LOT of o-rings! Are they better than T3s?

Vapor4life has carto tanks that are 808 thread then all that would be needed is a spacer ring or something to cover the gap.

A wrench in one hand and my PV in the other.

I don't have ANY fond memories with V4L cartos. That's why I've been pushing for SI to come out with some! Theirs are the best I've ever used!

 

[greasemonky89]

That would take A LOT of o-rings! Are they better than T3s?

I don't have ANY fond memories with V4L cartos. That's why I've been pushing for SI to come out with some! Theirs are the best I've ever used!

True i agree but if any the v4l dct looks just like the smoktech setup.

A wrench in one hand and my PV in the other.

 

[cindycated]

True i agree but if any the v4l dct looks just like the smoktech setup.

A wrench in one hand and my PV in the other.

Was hoping to not have to drill my own holes on SI cartos, and having them flanged would be very nice. I know I can get tank tubes anywhere. But thanks. Gonna try the Vision VT first though, before I go through all this trouble.

 

[CatLady007]

Awesome. I was hoping you'd say that. I love SI's bottom coil cartos, but I hate T3s. I like the convenience of quickly filling a T3 and running out of the house, but I spend the whole rest of the day kicking myself every time I do that. Trying the mini T3 next, but I have a feeling I won't really like that either. So hmmm, maybe I'll give these VTs a try...unless Imagine announces SI carto tanks!

See that? It would be perfect with these!

G'mornin, cindy! I liked the mini-T3 I got well enough that I ordered 2 more. (Haven't opened them, yet.) I"m on my 4th or 5th refill, and no troubles, so far. I don't recommend them with an auto battery, and will probably only use them on my spinner--momentarily increasing the voltage takes care of any slight gurgling, and they are not as airy as the full size T3, with a warmer vape. I will investigate more thoroughly before I replace my X2 clearos with them.