from what i have been reading and viewing you put in a tank after it has been cleaned and dried and let it sit for about 10 or 15 minutes or take some primer hits (draw on it while not hitting the button) to try to draw the juice down to the atomizer.
After cleaning the atty, I take it you need to "re-prime" it, yes? If so, do you just drip juice into the area that connects to the tank, or do you also drip the end that connects to the battery?
from what i have been reading and viewing you put in a tank after it has been cleaned and dried and let it sit for about 10 or 15 minutes or take some primer hits (draw on it while not hitting the button) to try to draw the juice down to the atomizer.
for manual batteries you are okay with dropping and blowing some juice through the battery end but if someone had automatic batteries wouldn't this have the potential to mess it up?
Basically. And a few people have lost Riva batteries on LR's. The 1.5Ω ones. I vape an SE Riva with a 1.7Ω tank atty with no problem - I just don't want to push it and frankly LR's act as a 'wet burn' and are somewhat self-cleaning. I've never cleaned my 306lr cisco, for example and it went for 3 months+. I used to 'clean' my 510 attys on my 5 volt mod but you have to watch it closely.
From another thread - model specific ego types - by Devonshire - I'm considering the ultrasonic cleaner.... although the vodka does well enough. The only thing is some coils are hard to see exactly how bad they are - I can tell by how yellow the vodka gets but I'd like to try the ultrasonic cleaner plus I could clean other stuff with it.
If it's working don't fix it. The reputed problem with VG in an eGo-T is that thicker juices are supposed to have a hard time making it through the wicking system. If you aren't having this problem then, you're golden.
I've had great success thinning out my thick juices with Distilled Water or Everclear. Add about 5 drops to the tank before you fill it up with the juice and shake it a bit after you snap it into the atomizer. It seems to keep the atomizers from fouling up as quickly and it also primes much faster.
the type a's were revised: they used to have a blunt needle but mine have a pointed/sharp needle. i have heard rumors that there was a third revision to the system but i think that is getting confused with the type b being released.
for the type b i am going to assume the vape is going to be about the same as the only thing that changed was the capacity of the tank.
Oh ok, don't really know if any revisions were made to the type b neither. But the vapor I'm getting is amazing. Don't know in the long term since I JUST got it today.
not big on adding alcohol to what i vape as i quit smoking so i can breathe and vaping alcohol is a little counter to that. i filled 2 tanks with some green mint vg and thinned it out with water. as soon as i go through my pre filled tanks i will try the ones i thinned out with water. so far the thinned out ones now look like they are as thick as the pre filled carts i ordered from cignot so hopefully it will work the same. not interested so much in TH as i am with feeling something in the lungs and breathing out vapor.
1 last question: my kit had 2 atomizers and the first one is still vaping strong but the second one is sitting around in my kit still; should i vape on the second one to or dont worry until it is time to clean it?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.