ego twist vs vision spinner

Status
Not open for further replies.

im_coryy

Senior Member
ECF Veteran
Apr 1, 2014
297
134
USA
both (the ego twist and vision spinner) seem to be a good price (30$) and a decent place to start when your looking to move up in the vaping world. both honestly look like the very first stepping stone into the wonderful world of mods. which one would you recommend and why?

also whats variable voltage or whatever it is? im under the assumption it allows you to control how much power the battery gives off making the vapor hotter or colder(more or less vapor?). please correct me if im wrong.

one last thing, because both the ego twist and the vision spinner cant read the ohms or whatever how do you know how high the voltage should be? what if its too high? too low?
 

happydave

Ultra Member
ECF Veteran
Jun 2, 2013
1,580
684
United States
i would go with a joyetech ego twist, people are reporting issues with the vision spinner.

variable voltage allows the user to control the amount of power supplied to the coil. this allows you to find that "sweet spot" where the atomizer head will make the best flavor and or vapor. this sweet spot is different for every head and e-liquid so its a bit of trial an error. start low and slowly turn the voltage up until its working well.

most brands of coils come labeled with a resistance value but this is often incorrect. you can get a multmeter for around $20 at your local hardware store that will allow you to test the resistance of the coils.
if you supply to much power to the coil it will taste bad or burnt / hot and ruin the wick / coil. and not enough power will not hurt anything but will not work very well.
 

The Ocelot

Psychopomp
ECF Veteran
Verified Member
Aug 12, 2012
26,497
79,193
The Clock Barrens, Fillory
Hi

An eGo Twist and a Spinner are very similar devices. Both are variable voltage from 3.2v to 4.8v. The Spinner is a little shorter and thicker than the Twist and has the voltage numbers on the body, whereas the Twist has them on the knob itself. Vaping is really all about what tastes good to you. When I was using Twists exclusively, I would pick juice devices around 1.8Ω to 2.0Ω. I would put them on the Twist at a low setting and turn the voltage up until I liked it. Too hot, turn it down; too cool, turn it up.


Inside of an eGo

egolatest.jpg


Spinner

spinnerlatest.jpg


spinner & twist compared

spinnertwistends.jpg


ETA: If the voltage is too high it will taste burnt and yucky before you do any damage to the coils. Also, the resistance of the coil would have to be pretty low for 4.8v to do any damage (and, as I said, it will taste like crap anyway).
 
Last edited:

Robdob

Senior Member
ECF Veteran
Verified Member
Nov 10, 2013
223
282
Colorado, via NH
I have 2 eGo twists I bought from the same vendor, and one I bought from a different vendor. The 2 look like the spinner in the picture, numbers on the battery etc. There is nothing on the bottom, but they have "eGo-C Twist" printed on the side. The one I bought from a different vendor looks like the picture. Does eGo have a model that looks like a spinner? :confused:



Hi

An eGo Twist and a Spinner are very similar devices. Both are variable voltage from 3.2v to 4.8v. The Spinner is a little shorter and thicker than the Twist and has the voltage numbers on the body, whereas the Twist has them on the knob itself. Vaping is really all about what tastes good to you. When I was using Twists exclusively, I would pick juice devices around 1.8Ω to 2.0Ω. I would put them on the Twist at a low setting and turn the voltage up until I liked it. Too hot, turn it down; too cool, turn it up.


Inside of an eGo

egolatest.jpg


Spinner

spinnerlatest.jpg


spinner & twist compared

spinnertwistends.jpg


ETA: If the voltage is too high it will taste burnt and yucky before you do any damage to the coils. Also, the resistance of the coil would have to be pretty low for 4.8v to do any damage (and, as I said, it will taste like crap anyway).
 

The Ocelot

Psychopomp
ECF Veteran
Verified Member
Aug 12, 2012
26,497
79,193
The Clock Barrens, Fillory
The term"eGo" has come to describe any battery of the style illustrated in the first image above. An authentic eGo will have the Joytech logo on the bottom and "eGo-whatever the model" written on the side. Generic eGos often have the eGo model on the side, but not the logo.

I encourage new vapers to have at least one authentic device in their arsenal, since there appears to be more problems with the generics, Not all generic are created equal; some may perform just fine, while others may have problems quickly. The same is true for Spinners - Visions makes the authentic ones (their logo is shown in the bottom picture). I have two Joyetech Twists going on 18 months old and have never had a problem. Granted, they don't get too much use these days, but my first Joyetech standard eGo kit I PIF'd to a friend is still working at almost 2 years old and her Joytech Twist is at least 6 months old.

Keep in mind that the products we use in vaping are mass-produced in China and the quality is iffy no matter if it's a name brand or a generic. There is no guarantee any of them will work well or poorly. If your device is performing to your satisfaction, don't worry about it being a generic.
 
Last edited:

GaG8tor

Super Member
ECF Veteran
Jan 6, 2014
531
327
Acworth, Ga. United States
Currently using 2 1300mah Spinners. Working great after 4 months. Actually tried a couple of VV/VW mods at a vape meet last weekend and honestly was not overly impressed. Not enough to justify spending the money on one at the moment. What I was impressed with however was the new 1600mah Vision Spinner.

Sent from my SCH-I535 using Tapatalk
 

GaG8tor

Super Member
ECF Veteran
Jan 6, 2014
531
327
Acworth, Ga. United States
Or for about $5 more you could get a Innokin iTaste VV/VW V3, variable voltage and variable wattage, works on pass-through too.
It's also square and won't roll off your desk.

I've considered one of those myself. Don't like the fact that it's only 800mah.

Sent from my SCH-I535 using Tapatalk
 

The Ocelot

Psychopomp
ECF Veteran
Verified Member
Aug 12, 2012
26,497
79,193
The Clock Barrens, Fillory
Currently using 2 1300mah Spinners. Working great after 4 months. Actually tried a couple of VV/VW mods at a vape meet last weekend and honestly was not overly impressed. Not enough to justify spending the money on one at the moment. What I was impressed with however was the new 1600mah Vision Spinner.

Sent from my SCH-I535 using Tapatalk

I quit smoking with a standard eGo and was fine for a number of months before I even got a Twist. I didn't feel the need for a variable voltage device, since I could vary the power on the standard by changing the resistance of what I put on top. Also, at the time, I couldn't taste anything other than strong menthol and mint, so the idea of "fine tuning" my vape was pointless. I finally did get a Twist and came to like it very much. I got a more advanced mod to celebrate 6 months tobacco-free. I wasn't unhappy with my vaping experience, I just wanted a pressie for my accomplishment. It has since become a hobby.

I prefer my spinners over my twist. Just because it's hard to read the numbers on the twist.


Sent from my iPod touch using Tapatalk

I have never used a Spinner (I don't think they were on the market when I got my Twist which hadn't been out very long), but I agree about the numbers. I used my Twist so much that the knob edges are rounded and the bottom of some of the numbers have worn off. I can't comment about how they compare in overall durability, each one has it's fans, but the Joyetech Twist doesn't come in as many colors or mAh choices as the Spinner.

If a person has quit smoking and is happy with their gear, they don't have to get a more advanced device unless they want to. Being able to switch out batteries is convenient and it's fun to try more variety in toppers, but there no real reason to go more advanced (in my opinion), unless you are having trouble staying off of tobacco (a more powerful consistent vape often solves that issue) or you just want to. There is nothing wrong with wanting new toys to play with.

I do think there is one thing wrong: telling new members that what they are using is junk and insinuating that if they don't get XXX mod or learn to build XXX they are "Not really vaping." If something works, it works. It's stressful enough to quit smoking, we don't need to make it worse. Vaping can be intimidating with all of it's unfamiliar terms and members disagreeing about what is "best" (I wish ECF would block that word). People often come here after several unsuccessful attempts to get off of tobacco. It's understandable that they may not want to make a large financial investment in something they aren't sure will work. It does a disservice to tell new vapers what is within their budget is junk, since it can be interpreted as implying that unless they spend more then they are prepared to or buy things beyond their comfort level they won't quit smoking using this method either.

Of course some devices are junk, some things can save people money in the long run and we don't want to see people throw money away, but we need to be sensitive to what the OP has posted and the information they are looking for. Some new members are already advanced and ask about nano coils; while others ask simple questions, like what resistance head they should get for an EVOD. Read the OP's questions. Answer them appropriately. Don't tell them to get XXX if it is more than what they have stated they can spend. Be supportive of where the OP is right now on their journey. Posting things like, In the future you might want to check out... is a nice way to offer tactful advice about more advanced vaping.

***Pop Quiz!***
(This actually happened)​

The OP is a very new vaper using a Twist and an EVOD. He doesn't know the difference between a clearo and a carto (per his posts). He has juice samples coming and asked what would be the best way to try them out.

This a good answer: True or False

"I use a rebuildable atomizer and drip. You can get them for less than $10."
(That was the entire post. The member moved on to another thread, without even posting a follow-up.)

Rawr
cheetah_icon_by_topazdragon19-d35u537.gif

The "O" in ocelot stands for opinionated
Now get off my soapbox
 
Last edited:

GaG8tor

Super Member
ECF Veteran
Jan 6, 2014
531
327
Acworth, Ga. United States
I quit smoking with a standard eGo and was fine for a number of months before I even got a Twist. I didn't feel the need for a variable voltage device, since I could vary the power on the standard by changing the resistance of what I put on top. Also, at the time, I couldn't taste anything other than strong menthol and mint, so the idea of "fine tuning" my vape was pointless. I finally did get a Twist and came to like it very much. I got a more advanced mod to celebrate 6 months tobacco-free. I wasn't unhappy with my vaping experience, I just wanted a pressie for my accomplishment. It has since become a hobby.



I have never used a Spinner (I don't think they were on the market when I got my Twist which hadn't been out very long), but I agree about the numbers. I used my Twist so much that the knob edges are rounded and the bottom of some of the numbers have worn off. I can't comment about how they compare in overall durability, each one has it's fans, but the Joyetech Twist doesn't come in as many colors or mAh choices as the Spinner.

If a person has quit smoking and is happy with their gear, they don't have to get a more advanced device unless they want to. Being able to switch out batteries is convenient and it's fun to try more variety in toppers, but there no real reason to go more advanced (in my opinion), unless you are having trouble staying off of tobacco (a more powerful consistent vape often solves that issue) or you just want to. There is nothing wrong with wanting new toys to play with.

I do think there is one thing wrong: telling new members that what they are using is junk and insinuating that if they don't get XXX mod or learn to build XXX they are "Not really vaping." If something works, it works. It's stressful enough to quit smoking, we don't need to make it worse. Vaping can be intimidating with all of it's unfamiliar terms and members disagreeing about what is "best" (I wish ECF would block that word). People often come here after several unsuccessful attempts to get off of tobacco. It's understandable that they may not want to make a large financial investment in something they aren't sure will work. It does a disservice to tell new vapers what is within their budget is junk, since it can be interpreted as implying that unless they spend more then they are prepared to or buy things beyond their comfort level they won't quit smoking using this method either.

Of course some devices are junk, some things can save people money in the long run and we don't want to see people throw money away, but we need to be sensitive to what the OP has posted and the information they are looking for. Some new members are already advanced and ask about nano coils; while others ask simple questions, like what resistance head they should get for an EVOD. Read the OP's questions. Answer them appropriately. Don't tell them to get XXX if it is more than what they have stated they can spend. Be supportive of where the OP is right now on their journey. Posting things like, In the future you might want to check out... is a nice way to offer tactful advice about more advanced vaping.

***Pop Quiz!***
(This actually happened)​

The OP is a very new vaper using a Twist and an EVOD. He doesn't know the difference between a clearo and a carto (per his posts). He has juice samples coming and asked what would be the best way to try them out.

This a good answer: True or False

"I use a rebuildable atomizer and drip. You can get them for less than $10."
(That was the entire post. The member moved on to another thread, without even posting a follow-up.)

Rawr
cheetah_icon_by_topazdragon19-d35u537.gif

The "O" in ocelot stands for opinionated
Now get off my soapbox

Totally. You hit the nail right on the head. That's exactly how I feel. I'm not too opinionated myself in regards to what works best for me and what may or may not work for someone else. Heck, I'm still a noob myself. I can only hope to share my experiences and if it helps someone else then that's a good thing. Whatever I can offer to keep someone off the stinkies.

Sent from my SCH-I535 using Tapatalk
 

evan le'garde

Vaping Master
ECF Veteran
Apr 3, 2013
6,080
5,953
55
Never used a twist. But the spinners are good for when i'm out n about, i expect the twists are good for that too. Rather be using one of those than having to carry around a more bulky device, plus i value my mods more than i do a semi disposable. Can't lose or drop a mod if it's sitting nice and safe at home. Whether the spinners are better that the twists or not i'm not sure. The spinners do have a knurled dial where the twist does'nt so that's one plus over the twist.
 

thekorstjens

Full Member
Verified Member
Apr 1, 2014
34
26
Chesapeake VA
I had both and cant really say one is better than the other. I preferred the vision because of knurled knob and easy reading numbers but as someone else stated the itaste vv is in the same price range and a much better and more versatile device IMO....had one of those too....is currently what my wife prefers to use. Even tho it is only 800mah....mine would last most all day and only about an hour less than the 1300 mah spinners and egos I had.
 

cbrite

Ultra Member
ECF Veteran
Verified Member
Jan 29, 2014
1,281
1,969
Pittsburgh, PA, USA
I recently bought a twist (from FastTech,so pretty inexpensive) because it was pink and you also could buy pink toppers.:) I have a vv3 and a Provari (a gift) so didn't really "need" another battery, but how can you pass up PINK! Also, everyone who has had either spinners or twists seemed to like and them a 1300 battery vs my 800 vv3 seemed like a good idea, too. But mostly, it was pink!
 
Status
Not open for further replies.

Users who are viewing this thread