Eleaf iStick "pico"

Status
Not open for further replies.

gerrymi

Vaping Master
ECF Veteran
Jul 12, 2013
3,917
14,560
The 'Burgh, PA.
the ECR & CLR are very same like design build
ECR is bigger and 'snaps' together (2 part body), lots of room
and is easy to install wire/wick
CLR is one body with screw-on cap - it also has the threaded juice flow ring

that is very nice to build with, it is also easy to install coil into
I truly like them both and is why I bought many of them

If I get the KIT (with the Melo III Mini tank)...would I be able to MTL vape with the 1.0Ω Eleaf ECR Heads and/or 0.9Ω Vaporesso Ceramic cCELLs in it???

(I realize I could rebuild the ECR...but that's way over my pay grade...:shock:)


[Off Topic question...Are there any Top-Filling tanks that use the CLR's???]

..
 

SKYYcamel

Ultra Member
ECF Veteran
Verified Member
Apr 15, 2009
2,170
3,097
Mississippi
So I don't sub ohm and don't use TC so would the Pico still work for me? I am a full blown Tootle Puffer but I like the idea of a replaceable battery!
It would work just fine in VW mode. Just as good as all those Provari blems you bought. :pervy:
 

AnsonJames

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2011
1,855
2,239
IRELAND
I think the Istick brand went through a bit of a dry spell over the past few months.
I had the 60TC but I wasn't overly enamored by it, I considered getting the 100 watt TC but I wasn't too bothered about it in the end.

Judging by the speed this thread is growing, I think Eleaf have a big seller with this one - it's a very nice device which is well worth the money.
 

Jim_ MDP

Ultra Member
ECF Veteran
Sep 24, 2015
2,153
2,697
I think the Istick brand went through a bit of a dry spell over the past few months.
I had the 60TC but I wasn't overly enamored by it, I considered getting the 100 watt TC but I wasn't too bothered about it in the end.

Judging by the speed this thread is growing, I think Eleaf have a big seller with this one - it's a very nice device which is well worth the money.

This will certainly be a big seller (despite the tank diameter limitation) but the 100TC is as well.

JoyeTech has been spreading the products and releases across all three divisions (JT/Wismec/Eleaf) and market demos so this would be the last of the six if you consider it as high/low wattage from each of the three. Starting from the VTC and Reuleaux last Sept/Oct.

Eleaf - 100TC (120w) & PICO
Wismec - RX & DNA Reuleaux (200w) & Presa (75w and now 100w 26650)
JoyeTech - Cuboid (200w and now a new Mini) and VTC

Rehabilitating Eleaf's reputation is not a simple thing, or a quick one. Though that started, slowly, with the 40TC last summer.
 
Last edited:

Jingles

Ultra Member
ECF Veteran
Verified Member
Jul 18, 2011
2,503
9,908
Ohio
I am just learning about the Pico and I really want the pink! RMV doesn't have any pink right now so price wise I'm not sure where to look!
Also, does anyone use a GS air tank on their Pico?
I have a GS Air M on my new pink Pico and it's working just fine. Right now, I have it set at 14.8 Watts.
 

Mactavish

Ultra Member
ECF Veteran
Verified Member
Jan 19, 2010
2,051
3,649
New York
pulled off the melo, and threw on the cubis with ss coil.......surprisingly the SS temp control is working fairly well on the ss cubis coils...apparently those coils like this pico...cause they haven't worked well on any other TC mod yet.

It's been speculated that the Cubis SS316 coils are actually 304. Two posts that go into more detail:

The Ultimate TCR List

The Ultimate TCR List
 

Jim_ MDP

Ultra Member
ECF Veteran
Sep 24, 2015
2,153
2,697
Thanks Jingles! If I can use the RMV code twice I will order the grey and wait on the pink! That pink is awesome and my 20w pink quit working last week! The battery is still good in it but the 510 connection has taken a dive!

I think that's a running code, not a "new customer" one. It should keep working.

For the new shipment on Monday...
I don't think he said he didn't order Pink mod-only kits... I think he posted that he wasn't sure if he ordered enough. Big seller. :p
 

aznnp77

Super Member
ECF Veteran
Verified Member
Aug 29, 2014
728
840
Virginia
So I don't sub ohm and don't use TC so would the Pico still work for me? I am a full blown Tootle Puffer but I like the idea of a replaceable battery!

I am a tootle puffer, vaping 7-8 watts on my KFL. It's a solid feeling mod. I mainly got it because I wanted to try something new, and the upgraded battery capabilities. I haven't charged it in 24 hours and I'm still at 3.8 volts in bypass. Which is at least half the battery left I'm assuming. It would almost dead with with my 40w.

Judging by the speed this thread is growing, I think Eleaf have a big seller with this one - it's a very nice device which is well worth the money.

I think there's so much competition in the box mod category right now. Eleaf had a market niche because they had the smallest form factor and attracted those that didn't want a giant Innokin MVP size brick in their pocket. The Pico goes back to it's roots. I think they should keep the 30w around because it was the smallest, skinniest, and you didn't have to buy separate batteries. That's just another complication.

Thanks Jingles! If I can use the RMV code twice I will order the grey and wait on the pink! That pink is awesome and my 20w pink quit working last week! The battery is still good in it but the 510 connection has taken a dive!

By what you're saying, I think you're going to wait. But Kanvape has the whole kit with the Melo 2 for $46.77 after coupon in stock. If you're going to pay 30 something for the simple kit, the Melo 2 might be worth the extra few bucks. RMV sells the tank by itself for $25 (minus coupon). I used the "president" code twice this week without a problem.

Request, someone please post a photo of a Pico with a 22mm rda on top and show the space between the rda and the battery cap. I use a 22mm x 12mm silicone anti slip ring to control leaking for pocket carry and am curious about how much clearance there might be.

See attached photo. My black iStick Pico with the Mutation x dripper that I never use. Someone wanna trade? It has my original build in it. My first ever dual coil creation. Came out to 1.6 ohms.
 

Attachments

  • PicoDripper.jpg
    PicoDripper.jpg
    564.9 KB · Views: 90
Last edited:
Status
Not open for further replies.

Users who are viewing this thread