ePipeMods Fully Custom Made Wood E-Pipes - Part 2

Status
Not open for further replies.

Bigfoot1974

Super Member
Supporting Member
ECF Veteran
Verified Member
Nov 14, 2010
572
879
Flemingsburg, KY
www.mammothskins.com
Totally off topic but it's been one before. Cameras. I just sold my Sony NEX-5 and need to get another. Has anyone tried the new Sony A7. I kept my extra lenses and batteries so I really want to stay with the e-maount and I was trying to decide between the NEX-6 or NEX7 then found the new A7 and was blown away. Any thoughts? Thanks
 

Jahf

Super Member
ECF Veteran
Verified Member
Feb 14, 2013
374
548
Nederland, Colorado, United States
I finally rigged up the kayfun 2.1 that came in while I was traveling. Vape quality equal to (or a bit better) than a full size kayfun and it looks perfect on a pipe. Just FYI :)

I'm going to pick up an Aspire BDC glassomizer soon, too. Will report back on a comparison of vape between the two. If the Aspire is as good as folks are saying I'm going to give them to family and friend vapers for the holidays.
 

ThetaReactor

Senior Member
ECF Veteran
Verified Member
Mar 13, 2012
290
440
GA, USA
Heh. I'm vaping an aspire as I read this. One of the big nova style ones, with the aluminum over glass tank. It's really fantastic. Best clearo I've tried, and works quite well straight off the battery. Dense, warm vapor that just rolls out of the mouth. I'm gonna get another that will probably find a permanent home on the mjolnir.
 

Nofretz

Senior Member
ECF Veteran
Verified Member
Jan 16, 2013
298
487
DFW
theculver.yolasite.com
I finally rigged up the Kayfun 2.1 that came in while I was traveling. Vape quality equal to (or a bit better) than a full size Kayfun and it looks perfect on a pipe. Just FYI :)

I'm going to pick up an Aspire BDC glassomizer soon, too. Will report back on a comparison of vape between the two. If the Aspire is as good as folks are saying I'm going to give them to family and friend vapers for the holidays.

Picked up a few of the "mini" BDC clearos for the wife. Haven't had any problems so far after 2 months. Also got the ce5-s for one of the Gandalfs - looks pretty good and the vape is a bit better than the Pro tank.
 

FnMag

Super Member
ECF Veteran
Verified Member
May 27, 2013
530
765
Dothan, Al. USA
Last edited:

MistBusterMatt

Unregistered Supplier
ECF Veteran
Feb 11, 2011
2,975
4,477
Ga USA
V3 pipes including some awesome freehands are scheduled to hit the site on Friday!
I should have a video ready for the V3 instructions in the next day or so :).
The USBaux is also scheduled to drop this Friday, which will have a video shortly as well.

Oh and Steam Sauce will hopefully be ready for release next Friday.
 

buergermeester

Senior Member
ECF Veteran
Nov 29, 2012
142
205
Germany
V3 pipes including some awesome freehands are scheduled to hit the site on Friday!
I should have a video ready for the V3 instructions in the next day or so :).
The USBaux is also scheduled to drop this Friday, which will have a video shortly as well.

Oh and Steam Sauce will hopefully be ready for release next Friday.

Great news Matt, I need something for Xmas in time ;)
 

Ironworker808

Super Member
ECF Veteran
Jan 14, 2012
329
811
52
Home Of The Worlds Most Famous Rat
V3 pipes including some awesome freehands are scheduled to hit the site on Friday!
I should have a video ready for the V3 instructions in the next day or so :).
The USBaux is also scheduled to drop this Friday, which will have a video shortly as well.

Oh and Steam Sauce will hopefully be ready for release next Friday.

EARLY PREVIEW PICS!

Should be standard for freehand releases, anyway. :p
 

dirquist

Ultra Member
ECF Veteran
Verified Member
Dec 2, 2009
2,316
3,220
50
Kent, Wa
I finally rigged up the Kayfun 2.1 that came in while I was traveling. Vape quality equal to (or a bit better) than a full size Kayfun and it looks perfect on a pipe. Just FYI :)

I'm going to pick up an Aspire BDC glassomizer soon, too. Will report back on a comparison of vape between the two. If the Aspire is as good as folks are saying I'm going to give them to family and friend vapers for the holidays.

Curious, how are you building your Kayfun. Ive had lots of Kay "fun" with mine. My most recent build is awesome. Its basically a rebuildable cartomizer in style. Basically a vertical coil on a drill bit about the size of the air intake hole. I think it is 9/10 wraps of 28g and it came out at 1.1 ohms. Then you wrap the coil in cotton until its big enough to fill the chimney cover thing. I got the idea from Jagelpuff or Jeffery over on the NW Vapers site. Im sure he didnt invent the idea lol but thats where I saw it. He has some nice pictures. It works great. Im always willing to try more builds though. I think I might actually get the Kayfun Lite Plus now.

Here are a couple pics my buddy Jeffrey Gallup took of his build.

67993_571509212922004_220570500_n.jpg

1457655_571509249588667_790648034_n.jpg
 
Last edited:

SimianSteam

Super Member
ECF Veteran
Verified Member
Feb 2, 2013
941
1,322
46
The Jungle
Curious, how are you building your Kayfun. Ive had lots of Kay "fun" with mine. My most recent build is awesome. Its basically a rebuildable cartomizer in style. Basically a vertical coil on a drill bit about the size of the air intake hole. I think it is 9/10 wraps of 28g and it came out at 1.1 ohms. Then you wrap the coil in cotton until its big enough to fill the chimney cover thing. I got the idea from Jagelpuff or Jeffery over on the NW Vapers site. Im sure he didnt invent the idea lol but thats where I saw it. He has some nice pictures. It works great. Im always willing to try more builds though. I think I might actually get the Kayfun Lite Plus now.

Here are a couple pics my buddy Jeffrey Gallup took of his build.

View attachment 279362

View attachment 279364

What mod is that on?
 

dirquist

Ultra Member
ECF Veteran
Verified Member
Dec 2, 2009
2,316
3,220
50
Kent, Wa
What mod is that on?

Not certain since those are my friends pics but I would guess his Caravela. Thats a 3.1 also not a Like Kayfun but I built mine the same on the lite.

So did you find any of those shiny gold ego covers on the net. If you didnt Ill figure out where I got mine and send you links if you still want any of those.


EDIT: Just tried to go to the EPM site to check for shiny gold ego covers and cant get the site up. hmm.. is it just me?

EDIT: Nevermind lol, it just popped up. EPM has some gold straight cut but no gold bells. Are you gonna get any gold bells in Matt. Im gonna need one and a new gold straight cut. Plus Im getting low on juice hehe. Kinda waiting to try the new Steam sauce though. Gotta pass on the first announced flavor. Just cant do any menthol even in the slightest anymore.
 
Last edited:

SimianSteam

Super Member
ECF Veteran
Verified Member
Feb 2, 2013
941
1,322
46
The Jungle
Not certain since those are my friends pics but I would guess his Caravela. Thats a 3.1 also not a Like Kayfun but I built mine the same on the lite.

So did you find any of those shiny gold ego covers on the net. If you didnt Ill figure out where I got mine and send you links if you still want any of those.

Ah! I was trying to figure out what mech was seamless with the Kayfun 2.1.

Nope, never found them. I'd very much appreciate if you could point me their way.
 
Status
Not open for further replies.

Users who are viewing this thread