ePipeMods Fully Custom Made Wood E-Pipes - Part 2

Status
Not open for further replies.

Keegan1014

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,538
2,321
52
Delaware
a blast from the past ....still vapes great. IMG_20120618_182505.jpg
 

MistBusterMatt

Unregistered Supplier
ECF Veteran
Feb 11, 2011
2,975
4,477
Ga USA
Also, thanks for choosing glass with these new bottles. I always move my juices into glass bottles anyways and this makes it so much easier. Any plans to do this with your 30ml bottles in the future?

I can get 30ml glass bottles that are the same as our current bottles... But I figured that most people would prefer to carry a plastic bottle in their pockets over glass.
Perhaps I'm wrong?
 

b0redagain

Resting in Peace
ECF Veteran
Jan 24, 2011
2,562
3,053
Denver, CO
I can get 30ml glass bottles that are the same as our current bottles... But I figured that most people would prefer to carry a plastic bottle in their pockets over glass.
Perhaps I'm wrong?
If used for that application I can understand. Perhaps it could just be an option for all of those people considering the health benefits of glass over plastic. There are a lot of people switching to glass these days and looking for vendors to do the same. Pretty good arguments in this thread on the subject.
 

dirquist

Ultra Member
ECF Veteran
Verified Member
Dec 2, 2009
2,316
3,220
50
Kent, Wa
Well I wasnt going to add this one until I actually knew a little about what I was doing but what the heck, I heard crickets a few posts up. Obviously my edges suck on this though lol.

Pipe of the Day 6

Actually, this is going to be a two part Pipe of the Day. I first posted a pic of this pipe the day I got it. I didnt have a stem I liked nor a system for it. Now I have two "final" setups for it. So here is the first with a Genesis LV.


Pipe of the Day a by pseudohippy, on Flickr

lol, damn that bottom edge sucks. Oh well, I'll figure it out eventually.
 

dcannon1

Senior Member
ECF Veteran
Verified Member
Feb 16, 2012
100
77
Savannah, GA
Trying to work out a deal to get a second hand EPM right now. Hope it goes through. The more I read about these the more I want one.

I've read a good bit of both threads, but not all so I'm not sure it's been mentioned yet, but one thing I would love to see in the future is a recessed tank pipe mod :wub: That would be so much win for me. Not really sure about the execution, but something where the tank is mostly hidden by the wood.
 

Keegan1014

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,538
2,321
52
Delaware
Well I wasnt going to add this one until I actually knew a little about what I was doing but what the heck, I heard crickets a few posts up. Obviously my edges suck on this though lol.

Pipe of the Day 6

Actually, this is going to be a two part Pipe of the Day. I first posted a pic of this pipe the day I got it. I didnt have a stem I liked nor a system for it. Now I have two "final" setups for it. So here is the first with a Genesis LV.


Pipe of the Day a by pseudohippy, on Flickr

lol, damn that bottom edge sucks. Oh well, I'll figure it out eventually.

Steam punk wasp,
Real beauty there truly one of a kind.

Sent from my Galaxy Nexus using Tapatalk 2
 

Keegan1014

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,538
2,321
52
Delaware
Trying to work out a deal to get a second hand EPM right now. Hope it goes through. The more I read about these the more I want one.

I've read a good bit of both threads, but not all so I'm not sure it's been mentioned yet, but one thing I would love to see in the future is a recessed tank pipe mod :wub: That would be so much win for me. Not really sure about the execution, but something where the tank is mostly hidden by the wood.

I agree that would be a awesome pipe.
The problem I see is most tanks hold 2+ ml of juice and it's a matter of time before you get some juice leaks.
Being recessed cleaning it out fast to prevent wood damaged would be hard to do.
Just my 2 cents.

Sent from my Galaxy Nexus using Tapatalk 2
 

JetSmooth

Senior Member
ECF Veteran
May 30, 2012
109
69
Baltimore-ish, Maryland
Y'all are making this "spend less money" thing really hard! :glare:

I'm just a few weeks into vaping with a couplea Volt batteries and 808 cartos, but found myself actually HOLDING them like a pipe (LED end cradled in the crook of my thumb, body coming out between my fire and middle fingers). So I decided to look at ePipes. I'm sold! I even bored out the stem of an el Cheapo Dr. Grabow and stuck my volt into it so I could get a more comfortable grip.

But since I'm such a noob, I need to figure out what's the simplest and least-expensive setup to get started. I'm 98% sold on an EPM model. Can I use a 510 > 808D adapter easily? I'd like to stick with that cart since I might also get a Volt X2 and want to be able to swap around. Or should I switch connectors at this point and go 510 for the bulk of my gear.

I'm going on a trip next week and may have some extra spendin' cash if I eat frugally and take advantage of the hotel's breakfast and dinner options. I'll keep an eagle eye at EPM for the pipe, but what all else so I need and where can I get it, if not from EPM?
 

MistBusterMatt

Unregistered Supplier
ECF Veteran
Feb 11, 2011
2,975
4,477
Ga USA
I agree that would be a awesome pipe.
The problem I see is most tanks hold 2+ ml of juice and it's a matter of time before you get some juice leaks.
Being recessed cleaning it out fast to prevent wood damaged would be hard to do.
Just my 2 cents.

Sent from my Galaxy Nexus using Tapatalk 2

You got it Keegan.
That is the sole reason why EPM has never made an attempt to recess or hide atties, cartos or tanks.
They all leak, and therefore the damage is just waiting to happen.
 

MistBusterMatt

Unregistered Supplier
ECF Veteran
Feb 11, 2011
2,975
4,477
Ga USA
Y'all are making this "spend less money" thing really hard! :glare:

I'm just a few weeks into vaping with a couplea Volt batteries and 808 cartos, but found myself actually HOLDING them like a pipe (LED end cradled in the crook of my thumb, body coming out between my fire and middle fingers). So I decided to look at ePipes. I'm sold! I even bored out the stem of an el Cheapo Dr. Grabow and stuck my volt into it so I could get a more comfortable grip.

But since I'm such a noob, I need to figure out what's the simplest and least-expensive setup to get started. I'm 98% sold on an EPM model. Can I use a 510 > 808D adapter easily? I'd like to stick with that cart since I might also get a Volt X2 and want to be able to swap around. Or should I switch connectors at this point and go 510 for the bulk of my gear.

I'm going on a trip next week and may have some extra spendin' cash if I eat frugally and take advantage of the hotel's breakfast and dinner options. I'll keep an eagle eye at EPM for the pipe, but what all else so I need and where can I get it, if not from EPM?

We'll have a new selection of shankless pipes on the site probably next weekend.
You can use an adapter with our pipes, just be careful not to over-tighten anything, and have spare fuses on hand.
Personally I would recommend switching over to 510 gear. It's the hardiest connector "we" (vapors) currently have IMO, even though it still sucks :).
 

MistBusterMatt

Unregistered Supplier
ECF Veteran
Feb 11, 2011
2,975
4,477
Ga USA
Well I wasnt going to add this one until I actually knew a little about what I was doing but what the heck, I heard crickets a few posts up. Obviously my edges suck on this though lol.

Pipe of the Day 6

Actually, this is going to be a two part Pipe of the Day. I first posted a pic of this pipe the day I got it. I didnt have a stem I liked nor a system for it. Now I have two "final" setups for it. So here is the first with a Genesis LV.


Pipe of the Day a by pseudohippy, on Flickr

lol, damn that bottom edge sucks. Oh well, I'll figure it out eventually.

Very Nice Dirq. How are you liking your LV?
I picked up the GTUS from ScubaBatDan and I dare say this may be the last atty I'll ever buy:vapor:

DSC03049.jpg
 

Keegan1014

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,538
2,321
52
Delaware
Y'all are making this "spend less money" thing really hard! :glare:

I'm just a few weeks into vaping with a couplea Volt batteries and 808 cartos, but found myself actually HOLDING them like a pipe (LED end cradled in the crook of my thumb, body coming out between my fire and middle fingers). So I decided to look at ePipes. I'm sold! I even bored out the stem of an el Cheapo Dr. Grabow and stuck my volt into it so I could get a more comfortable grip.

But since I'm such a noob, I need to figure out what's the simplest and least-expensive setup to get started. I'm 98% sold on an EPM model. Can I use a 510 > 808D adapter easily? I'd like to stick with that cart since I might also get a Volt X2 and want to be able to swap around. Or should I switch connectors at this point and go 510 for the bulk of my gear.

I'm going on a trip next week and may have some extra spendin' cash if I eat frugally and take advantage of the hotel's breakfast and dinner options. I'll keep an eagle eye at EPM for the pipe, but what all else so I need and where can I get it, if not from EPM?

Without hesitation, epipes, mostly epipemods epipes, are IMO
Second to none, the setups are endless.
As you research take note of other designs as IMO they are limited as far as versatility.

Sent from my Galaxy Nexus using Tapatalk 2
 
Status
Not open for further replies.

Users who are viewing this thread