Just wanted to crow and tell you that I made a box mod with the Okami, OKR-T/6 and it works like a champ,,,,I'm so excited. After my first bomb and complete bumble it sure picked me up when I put the batteries in and there was vapor and lights. I checked the voltage across the atty and it was 4.5 volts. Thank you every one for all your generous help and willingness to share and making me a happy vaper.
EverCool Variable Voltage Mod
- Thread starter bigblue30
- Start date
- th_trl_thread_readers 0
- Status
So I made an Evercool Mod with a free sample of the PTR08100W.
I read on here that Ti will send up to 4 samples. Will they send 3 more of the PTR08100W if I request them or do all the samples have to be different?
I have a Plug-in Power Module - Non-Isolated POL - PTN04050C - TI.com in my cart to request as a sample If you have to pick different items.
Or are there different items that TI carries that I can request that are more similar to the PTR08100W so I can make myself a few more of these awesome mods
I read on here that Ti will send up to 4 samples. Will they send 3 more of the PTR08100W if I request them or do all the samples have to be different?
I have a Plug-in Power Module - Non-Isolated POL - PTN04050C - TI.com in my cart to request as a sample If you have to pick different items.
Or are there different items that TI carries that I can request that are more similar to the PTR08100W so I can make myself a few more of these awesome mods
I believe they limit you to one PTR08100W per a sample request unless it has changed. The PTR08060W is almost the same thing it has a max output of 6 amps instead of 10 amps. Still more then enough amps to vape off of.
I think it is 8 items total and one each per item. The 4050C comes in 4 mounting methods so naturally you'd want to try all 4.
Better beware making a V.V. mod. Buzzkill will sue you for copyright infringement.
So if I want to sell one to recoup some parts money, they come and handcuff me.......
That's B.S. That's how Bill Gates started.
That's B.S. That's how Bill Gates started.
what has been copyrighted? The TI PTRxxxxxx or Murata OKR-Tx? LOL... Sorry... I can use either one any way I want to and SELL them if I bought them from a TI or Murata reseller... I've already asked BigBlues permission and recievd it.
yep
would like to try my hand at one of your mods but i'm no good at scematics how ever you spell it
Finally got the chance to sit down and make one of these suckers. Took me forever to build it, and of course the ratshack switch I put in there was doa (shoulda checked it!) so I had to rewire a spare in. Getting sick of red buttons...
Took me forever to cram it all in there. Had to score out some plastic from the bottom. I shoulda checked the clearances when I was soldering the caps to the board. I left them too high. The extra wire doesn't help either but I don't trust my soldering very much so that's just the way I do it.
I haven't even played around with it yet. I just started vaping on the voltage it was at when I first fired it up which was 4.3 (2.3ohm atty). I used to have a boosted 5V box and that thing wasted a ton of juice so I know I'm not gonna go that high.
Huge thank you to all who contributed to this thread. It's good to be in the VV club.
Took me forever to cram it all in there. Had to score out some plastic from the bottom. I shoulda checked the clearances when I was soldering the caps to the board. I left them too high. The extra wire doesn't help either but I don't trust my soldering very much so that's just the way I do it.
I haven't even played around with it yet. I just started vaping on the voltage it was at when I first fired it up which was 4.3 (2.3ohm atty). I used to have a boosted 5V box and that thing wasted a ton of juice so I know I'm not gonna go that high.
Huge thank you to all who contributed to this thread. It's good to be in the VV club.
can you use a panel mount POT instead of the blue box trimmers? I've found pretty much everything else at Jameco Electronics but I don't want to use the box trimmer I want a panel mount. Would any of the ones on this page work?
https://www.jameco.com/webapp/wcs/s...le Resistors / Potentiometers&category=208050
https://www.jameco.com/webapp/wcs/s...le Resistors / Potentiometers&category=208050
Yeah, they'll work the same.
A 50k ohm one should be idea. A range of 10-50k is ideal I think...that gives you 3.7 to 6.6v. But you may want to put an extra resistor in series with it to prevent you from turning the voltage up too high.
A 50k ohm one should be idea. A range of 10-50k is ideal I think...that gives you 3.7 to 6.6v. But you may want to put an extra resistor in series with it to prevent you from turning the voltage up too high.
Hello Everyone,
I'm getting ready to build a EverCool Box Mod. I cant wait it's going to be some such fun. I've had a heck of a time searching this thread for a detailed parts list and cross referencing digi-key.com I've come up with a nice parts list. (this should make it easy for others after me), and was hoping someone with allot of electronics experience can take a look.
Please let me know if these parts will work, and if I should change anything. I'm trying to use the same specs as bigblue30's mod.
Digi-Key.com
Qty .......... Part Number .......... Description .......... Unit Price
2 ..... 4163PHCT-ND ........ CAP 100V 10UF ELECT AXIAL ....... $2.74000
2 ..... 220ADCT-ND ........ RES 220 OHM 1/4W 0.1% MF AXL ....... $0.68800
1 ..... 3296W-201LF-ND ........ TRIMPOT 200 OHM 3/8" SQ CER MT ....... $2.56000
1 ..... PTR08100WVD ........ REG SW 10A 14VIN ADJ-O VERT 5SIP ....... $16.72000
1 ..... SBH-331AS-ND ........ HOLDER BATT W/COVR 3AA ON/OFF SW ....... $1.30000
1 ..... 67-1062-ND ........ LED 3MM 5V SHORT LENS GREEN DIFF ....... $0.51500
1 ..... EG1933-ND ........ SWITCH PB SPST-N/C METAL 3A BLK ....... $4.04000
1 ..... EG1929-ND ........ SWITCH PB SPST-NC MOM 3A BLK ....... $2.95000
1 ..... V2018-ND ......... PC BOARD .1"SP 3X3.5 SINGLE SIDE ..... $5.75000
MadVapes.com
Qty .......... Part Number .......... Description .......... Unit Price
1 ...... 10118 ........ Interconnect Project Circuit Board ........ $1.99
1 ...... 10352 ........ Prewired 510 Battery Connector, Sealed ....... $2.99
If you can help me locate different capacitors, I would greatly appreciate it. (The ones I have on my list are huge and I don't think they will fit in my 3xAA box)
The Digi-Key tantalum capacitors are water proof, hermetical seal, and very expensive, like $35-$125.00 each depending on the manufacture.
I have two push button switches because i'm not sure witch I like better.
Thanks!
PS. Batteries Not Included.
I'm getting ready to build a EverCool Box Mod. I cant wait it's going to be some such fun. I've had a heck of a time searching this thread for a detailed parts list and cross referencing digi-key.com I've come up with a nice parts list. (this should make it easy for others after me), and was hoping someone with allot of electronics experience can take a look.
Please let me know if these parts will work, and if I should change anything. I'm trying to use the same specs as bigblue30's mod.
Digi-Key.com
Qty .......... Part Number .......... Description .......... Unit Price
2 ..... 4163PHCT-ND ........ CAP 100V 10UF ELECT AXIAL ....... $2.74000
2 ..... 220ADCT-ND ........ RES 220 OHM 1/4W 0.1% MF AXL ....... $0.68800
1 ..... 3296W-201LF-ND ........ TRIMPOT 200 OHM 3/8" SQ CER MT ....... $2.56000
1 ..... PTR08100WVD ........ REG SW 10A 14VIN ADJ-O VERT 5SIP ....... $16.72000
1 ..... SBH-331AS-ND ........ HOLDER BATT W/COVR 3AA ON/OFF SW ....... $1.30000
1 ..... 67-1062-ND ........ LED 3MM 5V SHORT LENS GREEN DIFF ....... $0.51500
1 ..... EG1933-ND ........ SWITCH PB SPST-N/C METAL 3A BLK ....... $4.04000
1 ..... EG1929-ND ........ SWITCH PB SPST-NC MOM 3A BLK ....... $2.95000
1 ..... V2018-ND ......... PC BOARD .1"SP 3X3.5 SINGLE SIDE ..... $5.75000
MadVapes.com
Qty .......... Part Number .......... Description .......... Unit Price
1 ...... 10118 ........ Interconnect Project Circuit Board ........ $1.99
1 ...... 10352 ........ Prewired 510 Battery Connector, Sealed ....... $2.99
If you can help me locate different capacitors, I would greatly appreciate it. (The ones I have on my list are huge and I don't think they will fit in my 3xAA box)
The Digi-Key tantalum capacitors are water proof, hermetical seal, and very expensive, like $35-$125.00 each depending on the manufacture.
I have two push button switches because i'm not sure witch I like better.
Thanks!
PS. Batteries Not Included.
Last edited:
Well after looking through the thread again, I see why I had such a tough time finding caps for cheaper. I was looking at 100volt 10uF and not the recommended 10volt 100uF.
It should be 2 x 10volt 100uF Tantalum Capacitors, right?
Digi-Key.com
2 ....... 399-4551-ND ......... CAPACITOR TANT 100UF 10V 10% AXL ......... $3.47500
2 ....... 478-1845-ND ......... CAP TANTALUM 100UF 10V 10% RAD .......... $2.79000
It should be 2 x 10volt 100uF Tantalum Capacitors, right?
Digi-Key.com
2 ....... 399-4551-ND ......... CAPACITOR TANT 100UF 10V 10% AXL ......... $3.47500
2 ....... 478-1845-ND ......... CAP TANTALUM 100UF 10V 10% RAD .......... $2.79000
Yes that is correct, sounded off before but now that you have stated directly...
- Status
Similar threads
