He must have scooped a lot! Just from the few of us talking about here, must be close to 20 kits sold.
I got a total of 6
I like them better than the Silo's & ERM's, they fit a 24mm atty perfectly, even a 25mm don't look too bad. The 510 is of pretty good quality too, the corners are a little sharpe
a bit more rounded would have been nice.
Speaking of pennys, the two purhases that I made so far this year at FT with my (same) Paypal account was charged 1% foreign currency fee...or what ever they called it. Maybe be Visa or my bank, don't know.
Some of those enclosures I'll keep until the lipo's die out in the Hammond mods I made, then I'll switch the boards over. I like the size of these, small and pocket friendly, plus they are rugged and will take my abuse. For the price of a lipo (half of a FullyMax) you can afford to stash them away, when one get's beat up swap the boards out and always have a new looking mod. I'm sure as I keep thinking about it, I'll end up ordering more. 
I'm sure as I keep thinking about it, I'll end up ordering more. 
I'll probably just stick with 18650s for simplicity, if I do order some. If I remember correctly Mike was making some parallel packs as well. What battery were you using Mike?
Some of those enclosures I'll keep until the lipo's die out in the Hammond mods I made, then I'll switch the boards over. I like the size of these, small and pocket friendly, plus they are rugged and will take my abuse. For the price of a lipo (half of a FullyMax) you can afford to stash them away, when one get's beat up swap the boards out and always have a new looking mod.
I used recycled chips also
I took the 200's out of my 3D printed ERM'sI cant see them getting too beat up? They are aluminum like the ERM+'s & mine (ERM+) have takin a beating for a long time now, with nothing more than a few minor dings
These "Hana" enclosures are made for the long haul! Short of dropping them in the toilet or loosing it, I for see a very long run for this enclosure IMO this was the best deal since the "Hotcige" DX200's I shouldn't answer for Mike But all ready asked him the same question. Here's the link he gave me
https://hobbyking.com/en_us/turnigy-1000mah-1s-20c-lipoly-single-cell.html
I looked at those, here's a listing for just one with better pics
Hana Modz ONE MOD DNA 40 *Authentic* Matte Black Mod | eBay
They are kind like the hotcig dx's, battery pack separates from the front half but they use 18650's instead of lipo's. They do have DNA 40 boards in them, that's a plus, but I decided against them because the body of both halves are made of plastic, if you look at the battery half you'll see the tabs that lock it in place are plastic, I worried they would break or wear down to the point they would hold. I may be wrong and they may hold up well, I just rather have metal. Still, for the money, they to are a steal.
This is a link for all his listings--> zbbmods | eBay
I used recycled chips also
I cant see them getting too beat up? They are aluminum like the ERM+'s & mine (ERM+) have takin a beating for a long time now, with nothing more than a few minor dings
I shouldn't answer for Mike But all ready asked him the same question. Here's the link he gave me
https://hobbyking.com/en_us/turnigy-1000mah-1s-20c-lipoly-single-cell.html
Don't think making a parallel pack with those lipos would fit in the Hana mod we've built. The lipo that we have used, the blue one that comes with the kit, it's 26mm wide, the one linked is 34mm, remember how we didn't have room for the XT30 connectors. If you could find cells that would fit with those tabs, that would nice! I measured to confirm the dimensions of those blue lipo's, it is 70 x 26 x 20mm --> AS 950mah 3s 11.1v LiPo Battery High Quality | eBay
Just got a message from that zbbmods guy, took him days to respond, and after I placed the order, but the V4 that showed sold out when I place my order, Hana Modz V4 DNA 40 *Authentic* Navy Blue MOD *BLOWOUT SALE* | eBay He said he threw one of them and a couple free lipo's in the box for me. 
Thanks, Steamer. That's the battery I was thinking about but given Willie's comments I don't think it would work out well.
I got the link from Mike, maybe he can chime in & tell us if they will or will not fit?
I was going to try to build that kind of mod, but I never did.
The raw cells wont fit a ERM (or the Hana clone), too wide, they will fit an ERM+ easily though.
The days are gradually getting longer, 54 days til spring!
Glass half full...
I hate winter...
Glass half full...
I hate winter...
This was posted on "Vapecige's" FB page a few days back
So we are all ready seeing "Thinkvape & Vapecige" posting photos.
Il bet by the time the new "C" Chip drops these 2 budget friendly China Manufactures will have these models available, For far less than we will be able to build a new "C" Chip mod!
DNA250C. 2 battery to 200W. 3 battery to 300W. 4 battery to 400W. How do you think 2,3,4 batteries?
So we are all ready seeing "Thinkvape & Vapecige" posting photos.
Il bet by the time the new "C" Chip drops these 2 budget friendly China Manufactures will have these models available, For far less than we will be able to build a new "C" Chip mod!
DNA250C. 2 battery to 200W. 3 battery to 300W. 4 battery to 400W. How do you think 2,3,4 batteries?
It appears that then they were out by last Christmas.....just not to the end user.This was posted on "Vapecige's" FB page a few days back
So we are all ready seeing "Thinkvape & Vapecige" posting photos.
Il bet by the time the new "C" Chip drops these 2 budget friendly China Manufactures will have these models available, For far less than we will be able to build a new "C" Chip mod!
DNA250C. 2 battery to 200W. 3 battery to 300W. 4 battery to 400W. How do you think 2,3,4 batteries?
It would appear, they have the new chip & are probably beta testing it also.
So we can add 4S & 400 watts to confirmed & not rumour
The good news is the budget "China Mod Makers" will be releasing these soon
Similar threads
- Locked
