Evolv-ing Thread

[dwcraig1]

That's the one I have, I'll have to try it and see if it works. The kit I got also melt near 500F. And it all else fails I have a big dual heat Weller D550 260W/200W The Snap-On man came in one day, I asked him about a good solder gun and he showed me that one. He said, "You'll be able to solder battery cables (car) with that sucker." Well not quite but close LoL.

Since I got that idler arm replaced my car doesn't idle right.

 

[SlickWilly]

Let me know if that gun works, Willie. That's the one I was looking at. There are also fluxless rods available, more expensive but no flux needed. I do want to check the electrical conductivity of a joint as well.

I will, I'll check it out this weekend and give you a shout. I thing a BIG tip what won't instantly cool when you touch the work will help. And maybe laying the pieces on a hot plate and heating the up some?

 

[SlickWilly]

Since I got that idler arm replaced my car doesn't idle right.

Well there's your problem.

 

[awsum140]

I was thinking maybe a hot air gun could pre-heat quick and easy. The other "secret" is to let it cool naturally, don't douse it at all.

 

[SlickWilly]

No kidding aside, we had a lady come back after we topped off the freon for the A/C in her car. She said "Since you fixed my A/C my radio won't work." We use to call those "Since You's"

 

[dwcraig1]

Can you grease my rotors, my brakes are squealing.
Since you aligned my car my radio doesn't work.
And my favorite....You took my xxxx, it was on the seat.

 

[dwcraig1]

I removed the Nife70 coil and put in a twisted 28 gauge SS430, gotta go with what I know...for now anyway.
This is how I want my screen to be looking, probably will be getting the Dremel after this K5 clone in a few days as I think it can go more. It has enough air but the wicking is holding it back i believe.

 

[Phone Guy]

But here's a screen of my today's vape mail, a kayfun v5 (SXK) coiled with 26 gauge Nife70

Aw c'mon focal! Where's mine!?

 

[Phone Guy]

Can you grease my rotors, my brakes are squealing.
Since you aligned my car my radio doesn't work.
And my favorite....You took my xxxx, it was on the seat.

True Story... Worked on a guys phone, put on some ringtones, wallpapers, etc. He said I put too much stuff, it's too heavy now. (you can't make this stuff up)

 

[tiburonfirst]

 

[Phone Guy]

 

[awsum140]

I just found a disadvantage to an Aromamizer on a DNA200. I was sitting here, vaping and surfing, took a nice hit, exhaled and couldn't see the screen to point the mouse for about ten seconds.

 

[VapingBad]

I just found a disadvantage to an Aromamizer on a DNA200. I was sitting here, vaping and surfing, took a nice hit, exhaled and couldn't see the screen to point the mouse for about ten seconds.

That's the VG, I vape 100% PG and it only hides the screen of a couple of seconds, but if I add VG I'm trying to wave the fog away with my hand it just takes a lot longer to disappear.

 

[Phone Guy]

That's the VG, I vape 100% PG and it only hides the screen of a couple of seconds, but if I add VG I'm trying to wave the fog away with my hand it just takes a lot longer to disappear.

100% PG? Ouch.

 

[awsum140]

60/40, PG/VG, here.

 

[Steamer861]

I removed the Nife70 coil and put in a twisted 28 gauge SS430, gotta go with what I know...for now anyway.
This is how I want my screen to be looking, probably will be getting the Dremel after this K5 clone in a few days as I think it can go more. It has enough air but the wicking is holding it back i believe.

Just wondering, how many turns back do you open the juice flow control?

 

[Phone Guy]

My favorite juice is castle long, it's 50/50. I can't count how many bottles I've vaped over the years. It got too damn expensive to buy so I started vaping DIY juice at 70/30 (vg/pg) and I guess I got used to the smoother VG, and now 50/50 has a bite... It's not the Nic MG so I'm assuming it's the PG.

 

[dwcraig1]

Just wondering, how many turns back do you open the juice flow control?

When you see a gap between the tank bottom and AC ring you went too far, it's about 3.5 full turns.

 

[dwcraig1]

All my regular tanks get 75/25 (PG/VG), aromamizer 50/50, a real dripper type 95% VG (that's not to often)

 

[VapingBad]

100% PG? Ouch.

I try putting VG in it regularly but find the flavour is weaker and just not to my liking even with only 10% VG. I have one tank set up like that ATM and I can't see me vaping the whole tank, it started at 64:40 and have been thinning it to see if there is a small of VG I can take.