Evolv-ing Thread

[Steamer861]

Mike You hungry?
Why not call Kats, say you want to order again, But! last time the order was damaged.
Maybe they will compensate you for the last order?

Pretty cool design. Is the inside of chamber domed or conical shaped at the top. I've found that either of those features produce better flavor.

It's a little hard to tell, at 6.27 Todd shows the inside of the chamber. Keep in mind he is reviewing the original, not the Copper Vapes Clone. I would imagine it's the same thou.


Actually Todd's video is an older version Pauls video shows the newer deck/ air flow design
If you got an hour to waste you can check it out.

 

[mikepetro]

Mike You hungry?

Yeah, I have a craving for good ole ethnic food, pastrami, babka, peirogies, latkes, butcher fresh keilbasa, all that comfort food stuff i grew up on. Southern VA is NOT an acceptable source for any of that.

Although the latkes I think I can do a decent job making myself, and I wouldnt ever order them mailorder anyway.

 

[Steamer861]

Yeah, I have a craving for good ole ethnic food, pastrami, babka, peirogies, latkes, butcher fresh keilbasa, all that comfort food stuff i grew up on. Southern VA is NOT an acceptable source for any of that.

Although the latkes I think I can do a decent job making myself, and I wouldnt ever order them mailorder anyway.

Don't we live in a great time?
You can have specialized food delivered from half way around the country
I have to watch my wait My aunt keeps bringing over excellent home cooked Italian food & I can't even eat it

 

[Steamer861]

Here Daniels review on the "Govad"
Right at about the 21.00 mark he talks about the huge air flow holes & how they rob flavour!
This is exactly what I thought about the design, Ammit 25 is going to be the better Choice

 

[cigatron]

Mike You hungry?
Why not call Kats, say you want to order again, But! last time the order was damaged.
Maybe they will compensate you for the last order?



It's a little hard to tell, at 6.27 Todd shows the inside of the chamber. Keep in mind he is reviewing the original, not the Copper Vapes Clone. I would imagine it's the same thou.


Actually Todd's video is an older version Pauls video shows the newer deck/ air flow design
If you got an hour to waste you can check it out.

It is conical shaped in Phil's vid. His thumbs down for the posts being so close together applies to me as I'm very fond of 6-7 wrap 2.8-3mm 28g fused claptons in my single coil attys.
Thanks for the heads up and keep'm com'n.

 

[cigatron]

Here Daniels review on the "Govad"
Right at about the 21.00 mark he talks about the huge air flow holes & how they rob flavour!
This is exactly what I thought about the design, Ammit 25 is going to be the better Choice

Had my Ammit 25 V2 for three days and sold it. The seemingly age old problem with leaking juice between press fit jfc and afc strikes again. It would take 1/2 a day to wet the top if my mod, unacceptable.
On a positive note, I found the flavor to be as good as claimed. Great flavor and mighty cloud production.

 

[Steamer861]

It is conical shaped in Phil's vid. His thumbs down for the posts being so close together applies to me as I'm very fond of 6-7 wrap 2.8-3mm 28g fused claptons in my single coil attys.
Thanks for the heads up and keep'm com'n.

Good point! I saw that to, but for me this is a 22mm atty, so I will put it on a single 18650 or a 950mAH mod. I will run a small spaced round wire coil in it kind of like I would on a K-F
I have several mods with Claptons, there fine for flavour & vapor production, But not so good for battery life. I think this will be a good addition to my single coil battery friendly mods

 

[BobC]

OK, calling all NYers.....

I was contemplating ordering a pastrami from Katz's, but I also want a cinnamon Babka. Last time I ordered a babka from Katz the wrapper was punctured and it got dried out by the time i got it.

Is there someone else I should consider looking at for these two items that does mailorder?

Home - Greens Cakes

 

[Steamer861]

Had my Ammit 25 V2 for three days and sold it. The seemingly age old problem with leaking juice between press fit jfc and afc strikes again. It would take 1/2 a day to wet the top if my mod, unacceptable.

Your talking about the Amitt Dual coil? Not the new Ammit 25 with the "Big Clapton Deck" ?

 

[cigatron]

Your talking about the Amitt Dual coil? Not the new Ammit 25 with the "Big Clapton Deck" ?

Oops, yes. I had the Ammit Dual V2.

 

[Steamer861]

Oops, yes. I had the Ammit Dual V2.

I skipped that one. Too bad it leaked, the original Ammit I have don't leak at all.
All thou it's pretty much a rip off of the Merlin

 

[cigatron]

I skipped that one. Too bad it leaked, the original Ammit I have don't leak at all.
All thou it's pretty much a rip off of the Merlin

I saw 4 people vaping on the Ammit dual while at my fav vape shop. All of them had no leaks but as usual mine did. I may get another one when their new shipment arrives.
Def going to check out the Ammit 25.

 

[mikepetro]

Home - Greens Cakes

Thank you Sir........
You're not a bad guy for a squonker!

 

[BobC]

Any time, you Tanker

 

[KTMRider]

Tungsten

I had one of my Glock slides cerakoted in Tungsten

@BobC and @KTMRider etc,
Jersey counts too, heck I think Katz mailorder division is actually out of Jersey now.

I have no idea. I haven't been into NYC in a few years. Harold's Deli has really good pastrami sandwiches (sized for a small army) but I don't think they'd fair well in transit. Last time I had a sandwich there, it fed me for a few days.

 

[awsum140]

Hey Mike. I have a friend, Russian, who makes, what she calls, babka for every Russian Easter. It's a mix of cream cheese and cottage cheese, with the water squeezed out, sugar and almonds and what all else I'm not sure of. It'll knock your socks off and you can feel your blood slow down as it thickens while you're eating it.

What's all this atomizer talk? You'd think this was a vaping forum or something!

 

[SlickWilly]

.

@BobC and @KTMRider etc,
Jersey counts too, heck I think Katz mailorder division is actually out of Jersey now.

I can't help you Mike, I'm upstate in farm country. They don't have many deli's around here and those that we do have wouldn't hold a candle to Katz's, they are more boar's head cold cuts and glazed donuts.

 

[mikepetro]

curious what mike will find with his beta chip

you'd think something like that would have been spotted by the beta testers ............

OK, so, I switched to a 5mmID SS430 single coil in a Merlin:

• Measured with the Kelvin meter it measured 0.74 ohms
• Measured on the DNA75C it measured 0.73 ohms
• Measured on a DNA200 it also measured 0.73 ohms
  
• Mod resistance is set at 0.003

But, when I plugged in the copper plug to check the mod resistance I got this:

Notice the room temp..... (about 74 in the room)
Let the mod cool again (unplugged with no atty) for about 15 minutes, the room temp still said 92.1

However, I would say it is reading the coil correctly. +/- 0.01 ohms is not something I would normally be concerned about. Its only a variance of 1.3%, and remember, Evolv claims a variance of +/- 10%.

 

[mikepetro]

So, I was binging for comfort food:

• I got 3 pounds of Katz pastrami coming, and a half floaf of rye. (still got their mustard in the fridge)
  
• A Katz cinnamon babka, but i called them and asked for special packaging since the last one wasnt so great.
  
• I have had Greens before, but I think the cinnamon in Katz is higher quality and richer. Although Green's is very good and I would never pass it up.
  
• And an assortment of pierogies with caramelized onions coming for Piast Meats & Provisions | Piast Meats & Provisions | Buy Homemade Kielbasa, Pierogi, Polish Food Online.
• Also got a cherry and farmer cheese babka for Piast Meats & Provisions | Piast Meats & Provisions | Buy Homemade Kielbasa, Pierogi, Polish Food Online.

I will get my fill this weekend!

 

[awsum140]

You do have a defibrillator on hand, don't you Mike?