Evolv-ing Thread

[Steamer861]

Boooooo

Sent from my SM-T810 using Tapatalk

+1 E-Scribe is what sets the dna's apart from the pack!
Just got to take the time to learn how it works
There should be more YT videos on E-Scribe, don't know why some one isn't doing it.
Evolv should set up a YT Guy/Gal to make easy to follow videos on how to get the most out of E-Scribe IMO it would help a lot of people out & maybe even increase sales once people get over the intimidation factor of learning E-Scibe

 

[Steamer861]

 

[cigatron]

To download the .csv, go to Wire wizard | Steam Engine | free vaping calculators Select the wire type of SS430. In the "Temperature control results" box click on DNA200 and the curve, as a csv will appear. Then, select download and you're set. Keep in mind Steam Engine doesn't support MS products so you'll need Chrome or FireFox to be able to download. If you don't have them, you can copy the actual data and paste it into an editor. Just save it as a .csv file.

Next, in Escribe with the device connected, go to the materials tab. Below the list of available material click on the second icon, "Import Material" and import the saved .csv. Then transfer that to the device and create/change a profile to it.

If you got your wire from the Vape Mesh Company that .csv won't work very well. Like I said, a TCR somewhere around .0020 worked for me with their wire (Crazy Wire), but I am far more comfortable with a .csv with multiple points rather than a straight line reference. That's just me and YMMV.

Great post Awsum. All my downloaded Steam Engine CSV files are renamed SExxx so I don't get confused. Example: SETi, SE316L etc. All my linear TCR CSV files are named Ti388, Ti390, SS138, etc.
Honesty, when I get the TCR correct for a given spool of wire I can't detect a difference in vape quality between that and a TFR curve. Of course, both TFR curves and linear TCR settings have the same limitation when it comes to accuracy ie the actual TCR of the wire. There's more junk wire out there these days than those manufactured with the correct TCR value. Mike P is the only one here that has the equipment to accurately measure actual TCR values of wire with his temp probe. Hint, hint.

 

[tiburonfirst]

Boooooo

Sent from my SM-T810 using Tapatalk

 

[awsum140]

Feel free to use my post to download a .csv, too, Tibs

 

[dwcraig1]

The coffee looks pretty hot today.

 

[Eskie]

Early morning everyone.

 

[SlickWilly]

Early morning everyone.

Yah, wakie wakie!

 

[Eskie]

I've been up since 2 AM. I need lots of coffee.

 

[dwcraig1]

 

[tiburonfirst]

I've been up since 2 AM. I need lots of coffee.

wow! that's even worse than 4! i better count my blessings!

 

[SlickWilly]

I've been up since 2 AM. I need lots of coffee.

Welcome to my world, all I have is sleepless nights anymore. I would love to know what it's like to sleep eight hours and wake up feeling refreshed, ready to jump up and go but I haven't had that in many many years.

 

[Steamer861]

 

[Steamer861]

OMG! What happened to "Serve & Protect"

 

[dwcraig1]

 

[classwife]

...getting too much cheesecake in the coffee again here lately

 

[dwcraig1]

the other side of the coin

 

[Steamer861]

So a little follow up on the BB Clone by SXK
I have mine set to Ti preset, it's temperature dominant set at 60 watts.
I have tried the Exocet, Insider & an Aspire Triton coil I rebuilt with a Ti coil.
I can see the attraction to this device It works as well as most of my single coil RTA's
With the Exocet & Insider, I was able to get it to work quite well all most immediately.
The problem is if it's not right, you have to empty the tank & start over again, a bit of a pain.
So Far it's leak free All thou it took three trys to get to be leak free with the Triton coil (rebuilt by me)
I really like the compact size It will become my go to stealth mod to bringing out & about.
I ordered a few extra Boro's to set up with an Exocet & Insider
As of now the Exocet is my favourite RBA head for it, the Insider is a close second
The Air flow is quite good! It is a restrictive lung hit, I can live with
I will say it is worth the 102$ it cost from FT! I like it so much I ordered the Green one
I would have no issues paying full price for an authentic, If it wasn't such a hassle to get one

 

[Steamer861]

Well what do you know! They have "Blems" instock at Billet Box Vapor inc
I just got a "Rat Black" Authentic one, only 211$
They have Grey & Purple left.

"Product Description
Rev.4B = 60 type watts, big screen haz...
This is a blemished unit, aka: a factory 2nd, and is engraved as such!!! Blem units are selected from our reject pile for only the smallest of defects, ONLY relating to the aesthetics of the anodized finish. All blem units come with a black Delrin button option only."

 

[mackman]

So a little follow up on the BB Clone by SXK
I have mine set to Ti preset, it's temperature dominant set at 60 watts.
I have tried the Exocet, Insider & an Aspire Triton coil I rebuilt with a Ti coil.
I can see the attraction to this device It works as well as most of my single coil RTA's
With the Exocet & Insider, I was able to get it to work quite well all most immediately.
The problem is if it's not right, you have to empty the tank & start over again, a bit of a pain.
So Far it's leak free All thou it took three trys to get to be leak free with the Triton coil (rebuilt by me)
I really like the compact size It will become my go to stealth mod to bringing out & about.
I ordered a few extra Boro's to set up with an Exocet & Insider
As of now the Exocet is my favourite RBA head for it, the Insider is a close second
The Air flow is quite good! It is a restrictive lung hit, I can live with
I will say it is worth the 102$ it cost from FT! I like it so much I ordered the Green one
I would have no issues paying full price for an authentic, If it wasn't such a hassle to get one

If you remove the plate covering the board is there a USB connector inside to connect to Escribe?