There is a French atomizer called the "Doggy Style". This should be called the Doggy Style styled. I have two, SKX for mtl and the $10 one for looser mtl. Great flavor but the bottom fill is a pain. The tank is hard to unscrew for filling. The filling method might be the reason for the name.
They are tiny, easy to build, very simple with few parts and very light weight. Surprisingly, they don't leak and feed fairly well for a mtl Atty.
They are tiny, easy to build, very simple with few parts and very light weight. Surprisingly, they don't leak and feed fairly well for a mtl Atty.
I figure that there's a good reason why we don't try to shoot them down, maybe we might miss or something.
EDIT: The answer is perhaps this,
The scary reason why nobody has attempted to shoot-down one of North Korea's missiles
Last edited:
I have just now removed my TGT3 from my DNA250 @ 0.002 TCR and placed it on my rDNA40 (SXK60) clone with a setting of 21 Ni purity (CW430). All is well...........
Make that 22
Make that 22
I piffed my GMV3 & extension to another ECF'er a while ago, great tank just too small. You could easily stack the extensions to make it whatever sized you wanted.The Goblin Mini V3 has a deck a lot like the MerlinIt was very well thought out.
It's just small in Size & Capacity, there is a 2 mil extension, but I never got one.
Similar to my 10ml KFL+
I sent her the GMV2 and that PoS OBS Nano I could never get a decent vape from.
These days it's all about expanding my steam crave stable. Just waiting for the 41mm Titan to drop, it's going to be a sweet 25ml all day vape.
I'm going to have to build a new mod for it...
I piffed my GMV3 & extension to another ECF'er a while ago, great tank just too small. You could easily stack the extensions to make it whatever sized you wanted.
Similar to my 10ml KFL+
I sent her the GMV2 and that PoS OBS Nano I could never get a decent vape from.
These days it's all about expanding my Steam Crave stable. Just waiting for the 41mm Titan to drop, it's going to be a sweet 25ml all day vape.
View attachment 686055
I'm going to have to build a new mod for it...
25ml!! That would last me at least two days, maybe three! Only problem with that much jucie is once in a while I won't get enough rayon tail over the juice holes in one of my mizer v2 and it will leak if laid on it's side. I vape in bed and sometimes fall asleep with it in my hand, I've woke up to find a wet spot where the tank leaked till empty onto the bed, now if that was 25ml...... LoL
Gotta check it out, must have a nice big deck?
Don't know if I ever shared my one and only youtube video or told this history. Before I started vaping, before my accident and everything went bad I was deep into shooting pistol Bullseye matches, teaching handgun safety classes, hunting, reloading ammo and a firearms in general, I grew up around guns. I use to hang out on a bunch of firearm forums, my username was Benellinut because the pistols I finally graduated to for the matches were special match handguns made by Benelli, the MP95, one was in .22 for the .22 part of the match and for center fire the other was a .32 S&W Special, both were identical down to the weight so each felt exactly the same in my hands during the matches. Opps, I'm wandering off again, more info then required, sorry... anywho...
Being an old mechanic I had found this joke and it tickled me so this is my one and only video and that's the story why the username of the channel is Benellinut, not slickwilly, I didn't feel Benellinut would fit as a username here. Hope it makes you smile
You'll have to copy and paste the url, don't want classie to get mad at me.
youtube.com/watch?v=zSi-yCV-gQ4
Being an old mechanic I had found this joke and it tickled me so this is my one and only video and that's the story why the username of the channel is Benellinut, not slickwilly, I didn't feel Benellinut would fit as a username here. Hope it makes you smile
You'll have to copy and paste the url, don't want classie to get mad at me.
youtube.com/watch?v=zSi-yCV-gQ4
If anyone is interested, these are the pair of Benelli's I used, I added weight to make them identical, there is a area in the frame under the barrel to add weights. The red dots, rings and triggers adjusted to also match each other. The grip is an adjustable palm rest which I modified so I could swap it from one to the other in about 30 seconds. I did that for two reasons, saved me $150 for a second grip and I always had the same identical grip for each one, the only difference during firing was the slightly increased recoil with the 32. But by design, with the barrel so low, it is almost in straight line with your arm, the recoil was mostly straight back rather then up and to the left, that greatly helps in bringing the sight right back on the bullseye during the rapid fire course of fire. Moving to this pair of pistol brought my scores up 20 points right off the bat just because you weren't using two different handguns.
Yeah I know, this isn't a firearm forum Willy, I get it...
But I know there will be a couple who will appreciate it. I promise not to bring it up again, back to vaping. (Have I ever broke a promise?) 
Yeah I know, this isn't a firearm forum Willy, I get it...
But I know there will be a couple who will appreciate it. I promise not to bring it up again, back to vaping. (Have I ever broke a promise?)
All the new mizer's have juice flow control built into the base and it works very well. They have come a long way since the OG mizer's. Speaking of V2, I do love mine with the Trinity tank.
Last edited:
I converted a guy at work from smoking to vaping. I gave him a KTech Nano about a year ago and he was happy with it, running in watts mode. Now he is ready to grow, so I gave him one of those $20 DNA75s we got a little while back. I have a Merlin on order to go with it. Then it will be time to teach him how to wrap coils. He is an electrician so a lot of the battle has already been won, he understands ohms!
I was thinking of starting him on TI and rayon, what do you guys think?
I was thinking of starting him on TI and rayon, what do you guys think?
+1. On this! I have. 5 +'s. Best atty. ever made. IMO
I just run the basic 10mil version. With. A big Clapton across the middle. ADV for. Me
BTW, I am on the lookout for a decent 3d print design I can get printed, DNA flavored, that takes two 2170 bats. You guys keep your eyes open please and send me the breadcrumb trail.
What's 1 mm between friends?
Alpinetech GXL1 CNC Milled Aluminum Enclosure DNA75C Cutouts TYPE1 | eBay
I've built 6 of those (don't judge me, it's your fault) with 4000mah 20700 batteries in parallel, and those batteries in the holder are very nearly touching each other, though I wouldn't expect it to require major modification to fit 21700's. There's plenty of room in there for a different holder, though, just watch the clearance from the top of the holder to the + pin of the 510 you use.
FWIW, those are quite tall and quite heavy with those 2 batteries, their P+ boxes for the 75's are much better for the hand, kinda like a Tibs box with the chip on the side.
Alpinetech GXL1 CNC Milled Aluminum Enclosure DNA75C Cutouts TYPE1 | eBay
I've built 6 of those (don't judge me, it's your fault) with 4000mah 20700 batteries in parallel, and those batteries in the holder are very nearly touching each other, though I wouldn't expect it to require major modification to fit 21700's. There's plenty of room in there for a different holder, though, just watch the clearance from the top of the holder to the + pin of the 510 you use.
FWIW, those are quite tall and quite heavy with those 2 batteries, their P+ boxes for the 75's are much better for the hand, kinda like a Tibs box with the chip on the side.
Similar threads
- Locked
