Evolv-ing Thread

[SlickWilly]

OK you Walking Dead fans, any here? I think I figured out what's going to happen to Negan next Sunday, the pieces would fit. If I'm right it's a spoiler, who want's to hear it? Anyone? Who doesn't?

I'll hold off til tomorrow, if anyone posts they want to hear it and someone posts they don't I can do a PM and include those that do.

Speak up if you do or don't, or just don't reply and I'll know there's no WD fans here and drop it, no biggie, I'm sure I'll come up with something else to annoy some with.

 

[awsum140]

I know, Willie. Spock will beam down and save the day!

 

[SlickWilly]

I know, Willie. Spock will beam down and save the day!

Live long and prosper I don't think is in Negan's future.

 

[mikepetro]

 

[tiburonfirst]

 

[dwcraig1]

 

[MadOzodi]

This is a nice upgrade to the Supremes V1&2 $8.37 Authentic Steam Crave Aromamizer Supreme V2 RDTA Replacement Single Coil Deck at FastTech - Worldwide Free Shipping

I was looking at that after posting. I have the single coil upgrade deck for the Pharoah RDTA, but I think it's geared more towards the bigger diameter/flat/ribbon wires; it's hard to keep a fused clapton in place while tightening the screws.

My quest to produce the perfect fused clapton wires - I'm currently using 27ga SS316 fused with 36ga SS316 and am about to wrap a 27ga SS316 fused with 34ga SS316 coil - has made me forget what wires worked best for me and to set aside the aromamizers.

I need to start mixing my own ejuice like I intended to, like over a year ago.

 

[dwcraig1]

I brought out an old bottle of juice than I made at least 2 years ago. TPA type M, is was mixed at 2%, way to strong.
I mixed it down to 1.5%, still too strong. Kind of tasty though.

 

[Steamer861]

I was looking at that after posting. I have the single coil upgrade deck for the Pharoah RDTA, but I think it's geared more towards the bigger diameter/flat/ribbon wires; it's hard to keep a fused clapton in place while tightening the screws.

My quest to produce the perfect fused clapton wires - I'm currently using 27ga SS316 fused with 36ga SS316 and am about to wrap a 27ga SS316 fused with 34ga SS316 coil - has made me forget what wires worked best for me and to set aside the aromamizers.

I need to start mixing my own ejuice like I intended to, like over a year ago.

Are you not using the deck that came with the Pharaoh? Or are you using "Deck #3"

I like the original deck(to the far left) It's easy to trap any kind of wire with it

My favourite Clapton wire is Titanium, 2 by 24 wrapped in 30, I find it produces the best flavour
It's down fall is no dry burn So I'm replacing them fairly often!
As of late I have also been building SS430 2 by 24 cores with 36 gauge SS 316 wrap.
This wire works well in TC also & can be dry burned for longer life span, But the flavour is a bit less intense than with the Ti.

If you have an Aromamizer Supreme, I would highly recommend trying the new Single coil deck It very comfortably fits a big single Clapton coil. IMO it performs in line with the Pharaoh, give or take a bit & is a better quality Atomizer
I had one Pharaoh, come apart at the threads & cause wild shifts in Resistance readings
There was nothing I could do to repair it & ended up replacing it
Tha Supremes are very solidly built & I have never had resistance changing problems with them.

 

[MadOzodi]

Currently, the "stock/oem" deck; I also have decks 1 & 3.

I like my Pharaoh tank much more than my 'Mizer Supreme V1. In my experience, the Pharaoh RDTA is less complicated and leaks/seeps juice MUCH less than the 'Mizer Supreme; I've found no real difference in quality between the two.

If I decide to go back to dual vertial coils, I'll break out the 'Mizer(s).

 

[SlickWilly]

Are you not using the deck that came with the Pharaoh? Or are you using "Deck #3"

I like the original deck(to the far left) It's easy to trap any kind of wire with it

My favourite Clapton wire is Titanium, 2 by 24 wrapped in 30, I find it produces the best flavour
It's down fall is no dry burn So I'm replacing them fairly often!
As of late I have also been building SS430 2 by 24 cores with 36 gauge SS 316 wrap.
This wire works well in TC also & can be dry burned for longer life span, But the flavour is a bit less intense than with the Ti.

If you have an Aromamizer Supreme, I would highly recommend trying the new Single coil deck It very comfortably fits a big single Clapton coil. IMO it performs in line with the Pharaoh, give or take a bit & is a better quality Atomizer
I had one Pharaoh, come apart at the threads & cause wild shifts in Resistance readings
There was nothing I could do to repair it & ended up replacing it
Tha Supremes are very solidly built & I have never had resistance changing problems with them.

That's a wide variety of decks for one atty, impressive. Expensive atty and decks? Decks included or sold separately?

 

[Steamer861]

Currently, the "stock/oem" deck; I also have decks 1 & 3.

I like my Pharaoh tank much more than my 'Mizer Supreme V1. In my experience, the Pharaoh RDTA is less complicated and leaks/seeps juice MUCH less than the 'Mizer Supreme; I've found no real difference in quality between the two.

If I decide to go back to dual vertial coils, I'll break out the 'Mizer(s).

What ever works best for you is Great
I had retired my Supremes quite a while back, I have no use for dual coils any more (velocity deck) & the postless deck for the Supreme was a Fail!
Since the Pharaoh came out with the single "Big" coil Deck, I'v been sold on that kind of deck Only reason I brought the Supreme's back is now they have that type of deck to

That's a wide variety of decks for one atty, impressive. Expensive atty and decks? Decks included or sold separately?

Not really Willy, the Pharaoh was average price under $30, the decks were about $6 or $7
each.
I have 2 & 4 along with the original deck I mite as well not even bought them cause the original deck is the only one I use

 

[kiba]

I was looking at that after posting. I have the single coil upgrade deck for the Pharoah RDTA, but I think it's geared more towards the bigger diameter/flat/ribbon wires; it's hard to keep a fused clapton in place while tightening the screws.

My quest to produce the perfect fused clapton wires - I'm currently using 27ga SS316 fused with 36ga SS316 and am about to wrap a 27ga SS316 fused with 34ga SS316 coil - has made me forget what wires worked best for me and to set aside the aromamizers.

I need to start mixing my own ejuice like I intended to, like over a year ago. [emoji23]

Currently, the "stock/oem" deck; I also have decks 1 & 3.

I like my Pharaoh tank much more than my 'Mizer Supreme V1. In my experience, the Pharaoh RDTA is less complicated and leaks/seeps juice MUCH less than the 'Mizer Supreme; I've found no real difference in quality between the two.

If I decide to go back to dual vertial coils, I'll break out the 'Mizer(s).

Are you not using the deck that came with the Pharaoh? Or are you using "Deck #3"

I like the original deck(to the far left) It's easy to trap any kind of wire with it

My favourite Clapton wire is Titanium, 2 by 24 wrapped in 30, I find it produces the best flavour
It's down fall is no dry burn So I'm replacing them fairly often!
As of late I have also been building SS430 2 by 24 cores with 36 gauge SS 316 wrap.
This wire works well in TC also & can be dry burned for longer life span, But the flavour is a bit less intense than with the Ti.

If you have an Aromamizer Supreme, I would highly recommend trying the new Single coil deck It very comfortably fits a big single Clapton coil. IMO it performs in line with the Pharaoh, give or take a bit & is a better quality Atomizer
I had one Pharaoh, come apart at the threads & cause wild shifts in Resistance readings
There was nothing I could do to repair it & ended up replacing it
Tha Supremes are very solidly built & I have never had resistance changing problems with them.

Here's a pic of the single coil Aromamizer deck, for reference...

It's the same kind of hadaly style deck as the pharaoh but the air doesn't go through an inlet tube.

 

[SlickWilly]

I'm afraid we may not hear from awsum for a few days, he's in the way of that storm and may be on the generator for power again. He said they were predicted 11 inches of snow in his area and he was getting prepped. It's missing us in the east of the great lakes, it's cold but clear here Thank God! Who else is getting hammered?

 

[tiburonfirst]

had 3'' here this morning but all gone now

 

[awsum140]

I'm still here, even with the generator as long as the cable stays up we're just like, dare I say, normal? We've got about 8 or 10 inches, so far, and it's supposed to snow hard, and harder, until midnight. The thing that worries me is that there's hardly any wind at all which means the "real" storm isn't even here yet. The evergreen trees are really sagging and the rest of them are laden with snow too. Add in some wind and there goes the lights. I don't think my anemometer can spin, it's crusted with snow

 

[kiba]

I'm afraid we may not hear from awsum for a few days, he's in the way of that storm and may be on the generator for power again. He said they were predicted 11 inches of snow in his area and he was getting prepped. It's missing us in the east of the great lakes, it's cold but clear here Thank God! Who else is getting hammered?

There was a lot of snow but we still haven't got a chance to test out our genny yet.

Then when the plows come & spray that green stuff, the snow melts pretty much instantly.

 

[awsum140]

I want to thank Willie, publicly.

Last snow storm he mentioned adding rubber flaps to the impeller blades of a snow thrower to prevent it from clogging, especially in wet, heavy snow. Monday, ahead of this mess we now have,I did just that to our snow blower. The gap between the ends of the blades and the impeller housing was almost 3/4". I used some heavy rubber and double layered it, almost 1/4 inch thick with a metal bar to spread support, since the gap was that big. I just came in from clearing a path to the shed so I can get to the generator if needed and I cleared around the cars as well as the driveway up to the gate.

I can't believe the difference with those extensions in place. The snowblower was throwing snow, at best, ten feet and that was dry snow. It's throwing wet snow almost 30 feet now. That makes it really easy to clear a larger area without having to blow the same snow over and over again. It never clogged or even looked like it might clog. I don't think it will jam if it picks up a stone now, either. There's no gap to get jammed now.

Thanks, Willie, you made my day even with the snow!

Oh yeah, I was out there for about a half or three quarters of an hour and another inch plus where I cleared

 

[mikepetro]

I'm afraid we may not hear from awsum for a few days, he's in the way of that storm and may be on the generator for power again. He said they were predicted 11 inches of snow in his area and he was getting prepped. It's missing us in the east of the great lakes, it's cold but clear here Thank God! Who else is getting hammered?

Came home to a cold and powerless house, but all the sleet/snow melted today.

 

[awsum140]

Can't like that Mike. How'r the fish?