Evolv-ing Thread

[TrollDragon]

Is there a Peerless heading to the Ozarks?

 

[BillW50]

Yes! it can be a deep rabbit hole to go down. You can get your feet wet with the basics, start with a clone & a few accessories The site I linked to a few posts back (Legend) has a good start. You can get the SXK BB with USB & the Exocet for about $105

This will get you in the door & see if you want to go further from there

Oh man! And it begins...

• x3 SXK Billet Box Rev4B DNA60 w/USB
• x4 SXK Hellfire Exocet rta
• x6 SXK Boro tank
• x1 SXK Billet Box Atomizer Adapter
• x3 SXK A-tank
• x3 Vaporesso Ceramic EUC Coil Head w/Adapter (5-Pack)
• x1 SXK Replacement Panel - Acrylic Clear Frosted
• x1 SXK Replacement Panel - Honeycomb Black

$539.77 so far and I am far from done. Plus this alone is what four Drones would cost.

 

[dwcraig1]

I have placed one of my newest LG HD2's in my charger in anticipation of SXK Billet Box's delivery tomorrow. I plan on removing the Kanger RBA from my OG SubTank and placing it in the BB.

 

[dwcraig1]

Oh man! And it begins...

• x3 SXK Billet Box Rev4B DNA60 w/USB
• x4 SXK Hellfire Exocet RTA
• x6 SXK Boro Tank
• x1 SXK Billet Box Atomizer Adapter
• x3 SXK A-Tank
• x3 Vaporesso Ceramic EUC Coil Head w/Adapter (5-Pack)
• x1 SXK Replacement Panel - Acrylic Clear Frosted
• x1 SXK Replacement Panel - Honeycomb Black

$539.77 so far and I am far from done. Plus this alone is what four Drones would cost.

That's through the roof, now you will have to fix it for sure.

 

[BillW50]

I am really excited waiting for you to get yours. I hope that Kanger bridge works with the Kanger RBA. I probably should have tried it before I filled my Boros. That bridge, the ring screws on the bottom of the RBA/OCC and the other part is the chimney.

 

[Steamer861]

Just to put this out there, These are my favourite Blister Pack coils for in the A tank
Aspire Triton 2 Clapton Coil 0.5 OHM-5pack
They use juice like crazy! The performance is Excellent for a disposable coil head

 

[dwcraig1]

While I do buy from MFS because I like their prices and fast shipping I have yet to understand their price for the Lost Vape Drone.

 

[dwcraig1]

I just got done rewicking my mizer, this is the first time after the initial setup. I think I had the rayon a bit loose in the coils before, it started out with a big pop each time I fired it when cold.
Well never mind, still doing it.
I'll give it a little more time.
Edit: Works real good otherwise.

 

[Steamer861]

I just got done rewicking my mizer, this is the first time after the initial setup. I think I had the rayon a bit loose in the coils before, it started out with a big pop each time I fired it when cold.
Well never mind, still doing it.
I'll give it a little more time.
Edit: Works real good otherwise.

I get popping & spit back if the wick is loose in the coil I like it fairly tight in the coil & then just thin out to accommodate the juice well, if need be

 

[TrollDragon]

Oh man! And it begins...

• x3 SXK Billet Box Rev4B DNA60 w/USB
• x4 SXK Hellfire Exocet RTA
• x6 SXK Boro Tank
• x1 SXK Billet Box Atomizer Adapter
• x3 SXK A-Tank
• x3 Vaporesso Ceramic EUC Coil Head w/Adapter (5-Pack)
• x1 SXK Replacement Panel - Acrylic Clear Frosted
• x1 SXK Replacement Panel - Honeycomb Black

$539.77 so far and I am far from done. Plus this alone is what four Drones would cost.

That's a lot of vape gear there. That price wouldn't cover the BB, one atty and a pair of panels if they were all authentic.

 

[dwcraig1]

I get popping & spit back if the wick is loose in the coil I like it fairly tight in the coil & then just thin out to accommodate the juice well, if need be

This is the same coil, same wick, same juice that I use in most builds, the only difference with the mizer is considerably less power being supplied to the coil. I'm using dual coils on the mizer and single on the others.

 

[BillW50]

The only thing I experienced to fits the symptoms is if a tank sits and gets cold, some tanks will over-saturate the coil and pop a little from the start.

 

[dwcraig1]

My Billet Box (styled) left Ontario Ca. a couple of hours ago. Not CA.

 

[dwcraig1]

Here in this review there is mentioned how to adjust boost.
How did this guy get on here?

 

[tiburonfirst]

 

[gnees]

 

[mikepetro]

 

[dwcraig1]

 

[BillW50]

 

[gnees]

Not to side track the thread. If any one can help. please do. There's only 6 more hours left.

For the price of a Chinese Atty....

I am unemployed at the moment and gave a few bucks.

www.kickstarter.com/projects/biebert/you-dont-know-nicotine-documentary-film

As you were..