Explanations of DSE905' problems

[newsunshine]

After talking a lot to SLB about DSE905, we want to make explanation of DES905's problems.

1. Some DSE905 atomisers can heat up or work by itself when you do not use the dse905?

Sometimes the DSE905 atomisers can heat up when the bottom switch is on and the side button has a problem.

How to fix it: please make sure that the bottom switch is off when you do not use dse905. if your side switch has a problem, please request a replacement new better button from us.

SLB has improved the side buttons greatly.

2. why can ejuice come into battery component?

the V1's battery component is unsealed. so it happened sometimes.

the V2's battery component is sealed. so it wont happen.

3. what if we put battery backwards?

if you but battery backwards, it can not damage the battery component, but the dse905 can not work, because SLB has improved the circuit. so the battery backward will not damage the battery component any more.

If you have any other questions about dse905, please feel free to let us know.

any input will be highly appreciated.

Amy

 

[newsunshine]

Here goes a few pics of DSE 905 V1 and DSE 905 V2.
http://public.blu.livefilestore.com...vLKn-rBo7fFvXxnLeZkfxlVy5gEw/unsealed 905.jpg

Dse905 V1 unsealed battery component

Dse 905 V2 sealed battery component

http://public.blu.livefilestore.com...C2FulDjkYH7RJXtbhozrtOahOhaPuQ/sealed 905.jpg

 

[newsunshine]

DSE 905 V1 exposed wire

DSE905 V2 hidden wire

 

[newsunshine]

DSE905 V1 can not prevent reverse battery

DSE905 V2 can prevent reverse battery

 

[jboze]

Glad to see these issues getting worked out. Thanks for keeping your customers informed Amy!

 

[newsunshine]

Glad to see these issues getting worked out. Thanks for keeping your customers informed Amy!

We will keep doing that.

 

[TaketheRedPill]

Amy, thank you very much. Even tho I didn't buy my unit from you, you've been quick to answer questions and because you are adressing this issue, my vendor did offer to exchange my unit.

Very happy to see that the manufacturer added an insert to insulate the battery from the sidewalls and exposed ground wire. That was another big concern of mine.

Thanks again for keeping on top of this topic for all of us!

TTRP

 

[newsunshine]

Amy, thank you very much. Even tho I didn't buy my unit from you, you've been quick to answer questions and because you are adressing this issue, my vendor did offer to exchange my unit.

Very happy to see that the manufacturer added an insert to insulate the battery from the sidewalls and exposed ground wire. That was another big concern of mine.

Thanks again for keeping on top of this topic for all of us!

TTRP

It is a pleasure!

 

[Kelemvor]

what is about the easy to break atomizer connection that got mentioned and shown in the review video of Grim Greene at minute 10 ? is that fixed also ?

YouTube - GrimmGreen's Channel

 

[newsunshine]

what is about the easy to break atomizer connection that got mentioned and shown in the review video of Grim Greene at minute 10 ? is that fixed also ?

YouTube - GrimmGreen's Channel

They fixed the problem by using more powerful glue. I will post the pics soon.

 

[o2tangoagn]

I've been using a dse905 for about two weeks. It is unquestionably the best vaper of the 6 models I have tried so far. Looking at the photos I realize that I have an early (vi) model si I guess I have beeen lucky so far.

My question : I notice multiple attys seem to work on the unit. Which is best?

ThANKS, O2

 

[newsunshine]

I've been using a dse905 for about two weeks. It is unquestionably the best vaper of the 6 models I have tried so far. Looking at the photos I realize that I have an early (vi) model si I guess I have beeen lucky so far.

My question : I notice multiple attys seem to work on the unit. Which is best?

ThANKS, O2

O2,

DSE905 can work with dse901 atomisers directly.

With a 905 batt to 510 atty, DSE905 can work well with 510 atty.

with a 905 batt to 801 atty, DSE905 can work well with 801 atty.

with a 905 batt to 401 atty, DSE905 can work well with 401 atty.

If you want a bigger cart, 801 atty is a good choice.

if you want a better atty, 510 atty is a good choice.

Hope you will find one that fits you best.

 

[yuccons]

Question here.

My friend and I suffer with the same issue that isn't listed. I'm assuming it's not wide spread. Both of our V2's randomly stop producing vapor. When this occurs, if it's turned off for a few minutes, it'll produces enough for two pulls. All lights indicate it should be working fine. Tested with half spent/full batt.

 

[unkuser]

I received mine on 3 days ago. So here is some of my feedback

*Seems very solid. Well constructed. Nice looking silver, but slippery
*On/Off switch at the bottom is horrible. I would rather have another type of button (clicky maybe). Sometimes I dont know if the thing is on or off. It could turn on easily if left on a pocket or basically anywhere.
*Drill holes in the battery connector so it can be used with the 808. Right now I am using a 901/510 connector plus a 510 to 808/901 connector. When a 1 or 2 holes would fix the issue.
*A way to turn off the light or make the light smaller, or change the color. Anything is better than the red light.
*Make a model that can use 2 x CR2 as well has 1 x 14500. For double voltage vaping.
*I love this unit so far.
*Like the fact, you sell parts. I already had the batteries, charger, etc. So I just bought the top and bottom connectors.

 

[unkuser]

Deleted/ Double post

 

[Gemini]

Just wanted to say, i got my black dse905 a couple of weeks ago and i'm very happy with it. Firstly, the battery life is excellent, i'm a heavy vaper and i get roughly 2 days of battery life. The size and shape sits comfortably in my hand and the switch is perfectly situated, solid build, and all is as it should be. Good throat hit and plenty of vapour. So far i haven't had a single grumble about it, having read the other posts and reviews. I had been looking at this model for a while, you know, do i? don't i? but i'm sooo glad i bought one, i love it.. My poor dse901 and intellicig have hardly been used since i got it.

 

[newsunshine]

Question here.

My friend and I suffer with the same issue that isn't listed. I'm assuming it's not wide spread. Both of our V2's randomly stop producing vapor. When this occurs, if it's turned off for a few minutes, it'll produces enough for two pulls. All lights indicate it should be working fine. Tested with half spent/full batt.

i am sorry for the issue.

if it still does not vapor, please request a free replacement from us.

 

[newsunshine]

I received mine on 3 days ago. So here is some of my feedback

*Seems very solid. Well constructed. Nice looking silver, but slippery
*On/Off switch at the bottom is horrible. I would rather have another type of button (clicky maybe). Sometimes I dont know if the thing is on or off. It could turn on easily if left on a pocket or basically anywhere.
*Drill holes in the battery connector so it can be used with the 808. Right now I am using a 901/510 connector plus a 510 to 808/901 connector. When a 1 or 2 holes would fix the issue.
*A way to turn off the light or make the light smaller, or change the color. Anything is better than the red light.
*Make a model that can use 2 x CR2 as well has 1 x 14500. For double voltage vaping.
*I love this unit so far.
*Like the fact, you sell parts. I already had the batteries, charger, etc. So I just bought the top and bottom connectors.

Thank you for your review. Please keep us updated.

 

[newsunshine]

I got my black dse905 a couple of weeks ago and i'm very happy with it. Firstly, the battery life is excellent, i'm a heavy vaper and i get roughly 2 days of battery life. The size and shape sits comfortably in my hand and the switch is perfectly situated, solid build, and all is as it should be. Good throat hit and plenty of vapour. So far i haven't had a single grumble about it, having read the other posts and reviews. I had been looking at this model for a while, you know, do i? don't i? but i'm sooo glad i bought one, i love it.. My poor dse901 and intellicig have hardly been used since i got it.

hope that your dse905 will keep up good work.

 

[nitemarch]

Hi. I received my 905 from healthcabin today. It is working well and vapes great. I only have one issue. It seems the "master switch" at the bottom to turn the device on and off is not working? It appears to be just a metal "knob" which cannot be depressed, meaning it doesnt move at all when pressing it. Can anyone explain if this is normal with the V2 905's? meaning that the button doesnt actually function? Very odd indeed!