- Status
Been using the 2 evods from FT exclusively for the past month. For not much more than 5 bucks I will be grabbing a couple more of those after the recent price drop.
I've liked the hangsen banana and the juicy peach also but I do only vape it added to my ADV vanilla/licorice mix, never straight up.
I'm waiting for the hangsen vanilla to try out. According to my calc's I can't make my own for what they charge.
If adding a couple extra drops of flavour to each bottle works, my DIY days are numbered.
Some of the evod heads are not perfect but that happens no matter where they come from,
hangsen juices I like(so far and better than dekang for the ones I've tried)
Recommend both. Not perfect! But good value!
I've liked the hangsen banana and the juicy peach also but I do only vape it added to my ADV vanilla/licorice mix, never straight up.
I'm waiting for the hangsen vanilla to try out. According to my calc's I can't make my own for what they charge.
If adding a couple extra drops of flavour to each bottle works, my DIY days are numbered.
Some of the evod heads are not perfect but that happens no matter where they come from,
hangsen juices I like(so far and better than dekang for the ones I've tried)
Recommend both. Not perfect! But good value!
Neither of them are blogs and product reviews have been discussed regularly on the main thread. For some reason you just decided on another one. That's all well and good but until some one makes you a Mod. I think people have the right to post as they wish not as you wish.
Purchased both the Vamo 3 and Innokin SVD. Both are sturdy and look great! I prefer the Vamo since the buttons are much easier to use without looking. The fire button is much larger than the + and - buttons. The vape is phenomenal in both! Like the SVD but cannot stand the buttons. I keep having to look at it to make sure I am pressing the fire button instead of the + or - button. Great vape however! Love the one piece telescoping tube....no need to carry extra sizing tubes like on the Vamo. Still prefer the Vamo however! Is it me or do batteries seem to last much longer in the Vamo????
I have the Vamo V2. It has been awesome so far. Love it. It is the reason I quit smoking. The Viva Nova tanks it came with sucked. They leaked as soon as you put liquid in them.
$52.08 Vamo-Vivi Voltage Adjustable Rechargeable Electronic Cigarette Health Keeping Set - 2*18350 / stainless steel / US plug at FastTech - Worldwide Free Shipping
I have been using the Evods for over a month now and no major problems. One tank and coil was bad when I first got it but bought another tank and still saved money.
https://www.fasttech.com/products/1368602
The IGO-L is perfect. Love it.
https://www.fasttech.com/products/1400500
I have been using these Panasonic batteries in my Vamo for over a month now and they have been great.
https://www.fasttech.com/products/1141101
Bought this mouse for my wife and she loves it. Worked perfectly right out of the box.
https://www.fasttech.com/products/1269100
I am now waiting on a Private V2 and a KTS+ to get here.
I love FastTech.
$52.08 Vamo-Vivi Voltage Adjustable Rechargeable Electronic Cigarette Health Keeping Set - 2*18350 / stainless steel / US plug at FastTech - Worldwide Free Shipping
I have been using the Evods for over a month now and no major problems. One tank and coil was bad when I first got it but bought another tank and still saved money.
https://www.fasttech.com/products/1368602
The IGO-L is perfect. Love it.
https://www.fasttech.com/products/1400500
I have been using these Panasonic batteries in my Vamo for over a month now and they have been great.
https://www.fasttech.com/products/1141101
Bought this mouse for my wife and she loves it. Worked perfectly right out of the box.
https://www.fasttech.com/products/1269100
I am now waiting on a Private V2 and a KTS+ to get here.
I love FastTech.
I believe the replacement cones of the Vivi Nova not fitting is common. I had ordered a large supply of Vivi Novas and 400 replacement cones and the replacement cones didn't fit. After sending very closeup pics of the cone that does fit and what they had sent me, the supplier sent me 400 replacement cones and they didn't fit either.
Just got my SVD - not liking it = maybe it will grow on me - Vamo is more user friendly....imo.....also got some Liqua - am not sure if this is genuine - not in a box......hmmmmmmm
NOTE!!
FastTech has "real" Kanger ProTanks, AND they have "knockoff" ProTanks that are NOT the same.
They currently have real Minis - which is a bummer, cause I didn't know that, and just ordered one for a lot more!!
Real Kanger ProTank
Real Kanger MiniProTank
NOT a Kanger ProTank - it's not glass, it's missing the airflow channels, etc.
FastTech has "real" Kanger ProTanks, AND they have "knockoff" ProTanks that are NOT the same.
They currently have real Minis - which is a bummer, cause I didn't know that, and just ordered one for a lot more!!
Real Kanger ProTank
Real Kanger MiniProTank
NOT a Kanger ProTank - it's not glass, it's missing the airflow channels, etc.
You can always send it to me..
U got a Vamo V2? - lets trade....
The "not so real kanger" = doesnt say it is kanger - at least I dont see it states that. It is a X9 protank. I got the Kanger and I agree - it is as genuine as they come....need to get the Mini soon...
I've only made limited purchases from FT. So far, this is my experience:
1) Vamo 2, black (gunmetal finish), with NiteCore I2 charger, and 2 18650 batteries:
https://www.fasttech.com/products/1354104
No problems at all with this setup since early June. I've heard of issues with FT Vamos and it seems the SS models are the ones with button/firing issues. Charger will charge 18650, 14500 or 1 of each at the same time. I would recommend it.
2) I get these every month since March, that fateful month I discovered FT. I know some people will hate on these, and I am a newbie of sorts, but for the money and sampling small juice amounts - if you don't want to drip, can't drip - these are great. Out of 30+ purchased, only 3 were DOA:
https://www.fasttech.com/products/1320400
A few words of experience on these. They will last 2+ weeks with the same juice, sometimes 1+ month. I tried cleaning these with vodka between juices - this seems to make them leak and about half don't work afterward, so I don't recommend cleaning them, or cleaning them this way. They come in cheaper 7-packs, too:
https://www.fasttech.com/products/1411/10002095/1392700
1) Vamo 2, black (gunmetal finish), with NiteCore I2 charger, and 2 18650 batteries:
https://www.fasttech.com/products/1354104
No problems at all with this setup since early June. I've heard of issues with FT Vamos and it seems the SS models are the ones with button/firing issues. Charger will charge 18650, 14500 or 1 of each at the same time. I would recommend it.
2) I get these every month since March, that fateful month I discovered FT. I know some people will hate on these, and I am a newbie of sorts, but for the money and sampling small juice amounts - if you don't want to drip, can't drip - these are great. Out of 30+ purchased, only 3 were DOA:
https://www.fasttech.com/products/1320400
A few words of experience on these. They will last 2+ weeks with the same juice, sometimes 1+ month. I tried cleaning these with vodka between juices - this seems to make them leak and about half don't work afterward, so I don't recommend cleaning them, or cleaning them this way. They come in cheaper 7-packs, too:
https://www.fasttech.com/products/1411/10002095/1392700
No, it is an open forum, if you want control then I suggest you start your own website and moderate it as you wish.
Ref Minor:
Just FYI. I set this Thread up with the assistance and direction from Moderator "Caridwen" since there were other Fast Tech Threads. Caridwen asked me to set it up as a "Fast Tech Item Review Only." I did exactly as requested to start this Thread!
Move on if you don't like it or become a Moderator yourself so you can do/say whatever you want! The tone of your response is sad for a fellow ECF'r. After all, isn't this site for everyone to get to know one another, help each other out and develop new friends?
Back on track.....any other Fast Tech item experiences, recommendations, etc.?
Just FYI. I set this Thread up with the assistance and direction from Moderator "Caridwen" since there were other Fast Tech Threads. Caridwen asked me to set it up as a "Fast Tech Item Review Only." I did exactly as requested to start this Thread!
Move on if you don't like it or become a Moderator yourself so you can do/say whatever you want! The tone of your response is sad for a fellow ECF'r. After all, isn't this site for everyone to get to know one another, help each other out and develop new friends?
Back on track.....any other Fast Tech item experiences, recommendations, etc.?
New (to me) item in this morning.
X10 Protank Atomizer with DCT Tank (4.0ml)
SKU 1392800
Got 2 of these. Of course, they are Not DCT and didn't expect them to be. DCT style would be a better description.
As I have heard that these "can not" take the evod/protank/T3S coils, I ordered replacement coils along with them
X10 Protank Atomizer Coil Head
SKU 1394500
Anyway, ABS plastic, not a problem for me. Love the ability to use my own drip tips with these!
After cleaning and a quick dry burn of the coil, put it on my Vamo (original V2).. NoGo.. 9.9 ohm error. Figured that would happen and added an adapter. Worked great and vaped fine. put it on one of my eGo-TU's and hit it for the last 3 hours.
Vaped 1/4 tank of 50/50 PG/VG of 20mg DIY Watermelon. Slight metallic taste.. might be me as just started a new prescription, but otherwise, good!
Just for S & Giggles, removed the X10 and checked the connection. slight pool of juice on the battery. Removed the X10 coil and checked the sizing for a T3S coil. The T3S stem is too wide to fit into the X10, BUT the smaller evod stem fits fine. I think the older T3 stem might fit also.. will check later. So.. I'm using a kanger coil in it now and it's working great
The Kanger vs X10 coils are not a perfect swap as the X10 coils are a bit thinker where the stems plug in into the coil part it's self. It should still be doable though with a little muscle. No juice on the battery yet using teh kanger coil.. only been using it for about 30 minutes that way.
So far, I'm happy..
X10 Protank Atomizer with DCT Tank (4.0ml)
SKU 1392800
Got 2 of these. Of course, they are Not DCT and didn't expect them to be. DCT style would be a better description.
As I have heard that these "can not" take the evod/protank/T3S coils, I ordered replacement coils along with them
X10 Protank Atomizer Coil Head
SKU 1394500
Anyway, ABS plastic, not a problem for me. Love the ability to use my own drip tips with these!
After cleaning and a quick dry burn of the coil, put it on my Vamo (original V2).. NoGo.. 9.9 ohm error. Figured that would happen and added an adapter. Worked great and vaped fine. put it on one of my eGo-TU's and hit it for the last 3 hours.
Vaped 1/4 tank of 50/50 PG/VG of 20mg DIY Watermelon. Slight metallic taste.. might be me as just started a new prescription, but otherwise, good!
Just for S & Giggles, removed the X10 and checked the connection. slight pool of juice on the battery. Removed the X10 coil and checked the sizing for a T3S coil. The T3S stem is too wide to fit into the X10, BUT the smaller evod stem fits fine. I think the older T3 stem might fit also.. will check later. So.. I'm using a kanger coil in it now and it's working great
The Kanger vs X10 coils are not a perfect swap as the X10 coils are a bit thinker where the stems plug in into the coil part it's self. It should still be doable though with a little muscle. No juice on the battery yet using teh kanger coil.. only been using it for about 30 minutes that way.
So far, I'm happy..
I take it back - am liking the SVD. Did notice one thing about the Kanger Protank - the one I got from FT has a raised bridge/platform in the tank. Lets see if I can explain - looking at the tank attached to my SVD (from FT) or Vamo V2 (also from FT) right above the lower SS casing where the glass tank starts - I see the bridge in the tank - also can see it when I fill em. The one I got locally doesnt have this. Doesnt mean the one from FT is fake - could be an older version or new version.....or maybe the one I got locally is fake - lmao Any ideas?
edit = better description - it is a plate that is attached to the air flow tube.....at the bottom
edit = better description - it is a plate that is attached to the air flow tube.....at the bottom
Last edited:
- Status
Similar threads
- Locked