• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Fasttech Veterans

Status
Not open for further replies.

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
China Post I presume - they are getting better, mine was shipped last Saturday, so I might get it by Next Monday
Could the getting better/faster have anything to do with downturn in business?
...or are they moving as much as they can in case legislation causes problems?

So. I placed another order from chefs I figured for whatever reason they were getting my emails and on the notes for the order I placed I repeated the fact that the description was wrong under lose brew and ask them to replace the ones I bought. I received an email back from them apologizing saying they hadn't received any of my emails over the last five weeks so I pointed them at the notes system and show them that they been going in there as well. So if any of you try to communicate with him they have had problems getting notifications from their system anyway they made it right they shipped really quickly to me they included some free samples of an apology and I have a bunch more concentrates tinted now.
So they handled it well ultimately.
I've never had a problem with communications for Chefs, and they've always been completely helpful, so glad to hear you finally 'got through' :)

Received 8 new concentrates from
Chefs so I'll be brewing some up. May have to
Pick @Pictor 's brain as some are flavor Apprentice
Which concentrates have you ordered?

Been a while since I made any DIY, but I'll at least need to make some MCV in 0mg soon (want to have 100ml 0mg to use, and also some to dilute some 12mg I have down to 2 or 3mg).
Not really in the mood to 'mess about' with it, but will have to :)

Off for sleep myself too now!
 

h00ligan

Ultra Member
ECF Veteran
Verified Member
Jan 2, 2015
2,729
6,453
London, UK
So the k-bag actually holds a fair bit of juice

30 ml unicorn Bottles in Netted area
30ml glass dripper on top
15ml glass dropper on bottom.

With full bottled this is just under a liter of juice.

Now I can get it off the holder inn the nightstand as the dogs are getting closer and closer trying vaping.. They're being super naughty.

3a7659efc738b6aa150ce0a13114d0df.jpg
 
  • Like
Reactions: Ms.Sue

h00ligan

Ultra Member
ECF Veteran
Verified Member
Jan 2, 2015
2,729
6,453
London, UK
Yes, with all those holes you would think it would be airier, I have mine fully open on a Cloupor Mini - single coil 1.13ohms @ 20w with a 50/50 12mg Captains Custard.
I just saw the cloupor mini mentioned .. I still see these for sale. They have been out ages now. I feel like after the issues with USB charging and the melting or exploding or whatever it was they did they went off then market a short while and now they have an back log for sale. They're even listed as new some places..

Did you get yours recently or back when they first released them? I don't believe mine has the issue with the fire hazard but I'm not entirely sure. Info know it has a somewhat annoying delay prior to firing.. Did they fix that? Have they released anything since then? The plastic that covers the wiring camenoff mine and had to he glued back and the battery ribbon broke. The finish is also very delicate. All in all a very poor device but perhaps I got a dud? Support wouldn't help me in any way with any of the issues..
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
I just saw the cloupor mini mentioned .. I still see these for sale. They have been out ages now. I feel like after the issues with USB charging and the melting or exploding or whatever it was they did they went off then market a short while and now they have an back log for sale. They're even listed as new some places..

Did you get yours recently or back when they first released them? I don't believe mine has the issue with the fire hazard but I'm not entirely sure. Info know it has a somewhat annoying delay prior to firing.. Did they fix that? Have they released anything since then? The plastic that covers the wiring camenoff mine and had to he glued back and the battery ribbon broke. The finish is also very delicate. All in all a very poor device but perhaps I got a dud? Support wouldn't help me in any way with any of the issues..
Both mine are from the original stock, and they both work flawlessly, although the silver one, sometimes restarts when the fire button is pressed when the battery gets to about half way, I do tend to use them for higher resistance builds, and I have retired them twice before and ended up bringing them back in to use.
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
Morning Bob
Did you ever find any more details about the fishing line dispenser,Todd mentioned in a vid months ago?
You mean this:
2016-01-20 12.24.12.jpg

Takes a while to load the spools, but does the job once loaded, I only have 3 out of the 8 spools in use, with Kanthal.
 
  • Like
Reactions: Brynglas

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
  • Like
Reactions: Brynglas

Brynglas

Vaping Master
ECF Veteran
Verified Member
Sep 22, 2014
4,561
6,449
ΩFlint MountainΩ
  • Like
Reactions: Bobw1951

h00ligan

Ultra Member
ECF Veteran
Verified Member
Jan 2, 2015
2,729
6,453
London, UK
Both mine are from the original stock, and they both work flawlessly, although the silver one, sometimes restarts when the fire button is pressed when the battery gets to about half way, I do tend to use them for higher resistance builds, and I have retired them twice before and ended up bringing them back in to use.

That is basically the same story as mine. The finish marred very easily but it keeps.comjng back out. Despite the delay. .
You mean this:View attachment 523875
Takes a while to load the spools, but does the job once loaded, I only have 3 out of the 8 spools in use, with Kanthal.
Great. After I spend $25 on elastic bands I see this for the first time. Certainly looks much better than the spool savers i bought though I guess not as portable. I glanced on eBay for that item in the USA or something similar and found nothing. I'm sure I just need a better search phrase. Oh well I guess my friends will be happy to get the elastic ones. I certainly would like to find a good way to respool the stainless steel I have on that giant spool to something that fits in a bag. Any ideas for a single spool? I'm surprised we haven't seen a single spool with crank or something for respooling and rebranded for valuing. I'm going to look again for this item too because I want one but I don't want to pay international shipping and get dinged on the conversion - it would quickly go tkn$40-45

Arrivjng today is the event luc6 Bluetooth six Bay charger. I'm finally at a point where a two Bay charger is just requiring me to get up and down far too much. I'll keep the note core d2 going as well since u use them to charge the 50 Enel opportunity batteries I have. I'd like to.fjnd a proper rapid charger for the Eneloop - I need to remember what technology Eneloop are...niMh?

Anyone have a rapid charger for Eneloop batteries?

Flow If you get them on sale and use a lot of aa/aaa they save a lot of money in the long term. Tco is probably 1/4 disposable batteries but for me the fact camera flashes recycle twice as fast as with disposables was the selling point. I'm a bit surprised we haven't seen chips that work off regular rechargeable batteries. Surely there's some way to make that work with a piece of hardware.

Happy hump day everyone.
 

h00ligan

Ultra Member
ECF Veteran
Verified Member
Jan 2, 2015
2,729
6,453
London, UK
Yes they work quite well,but i keep all my wires in one box and they all get stuck together :laugh:



Thought i'd give you something to do;)
Tempus Fugit
Thankyou:)
How exactly does this work. You just spool the included from your purchased and insert them? They offer free shipping so I may order one.

They won't post it to the USA and I can't find anything here like that!!
 
Last edited:
  • Like
Reactions: Bobw1951

h00ligan

Ultra Member
ECF Veteran
Verified Member
Jan 2, 2015
2,729
6,453
London, UK
Sorry to keep going on about wicking material but I have another question.

I was given a link to MUJI online store and they have Unbleached Cotton Pads 102 (90x70mm) - Natural for £3.95 and P&P is £2.95
And on FT they have UD Muji Organic Cotton 5 pieces for $2.19.

So is MUJI the brand or the name for the cotton?.
Yes. That's correct. Just like koh gen Do or.fotton bacon.

I have a big bag of it and find it to be the worst material currently.kn my house. The upside is my girlfriend can use it for clearing off makeup etc.

Muji pads are half the size of a koh Gen Doh and thickness - for facial use their nowhere near as soft either and definitely require removal of the top layer for wicking I'm. Obviously they work really well for others.

Pbusardo did a wicked shootout on YouTube.
 
Last edited:
  • Like
Reactions: Ms.Sue
Status
Not open for further replies.

Users who are viewing this thread