Fasttech Veterans

[Brynglas]

View attachment 405658

First thing,sorry for the poor picture.Phone camera

Had a play this morning and got my V4 coiled and wicked.
Plonked it on an istick to give a size comparison.

Easy to build on,Did 7 wraps of 28g Kanthal on a 2.5 size coiler.Came a little higher than i wanted at 1.6 ohms.

Very pleased overall,good flavour,good vapour and not the tight draw i expected.


Words for Terry,if you're in any doubt mate,don't worry, they are great.I'd get them ordered if i were you.

 

[Bobw1951]

Can't post the link to the supplier here, but here is the thread on AAEC where they are being discussed:
Evolve DNA 40 clone temp control - first look | ALL ABOUT E-CIGARETTES UK

 

[Brynglas]

Can't post the link to the supplier here, but here is the thread on AAEC where they are being discussed:
Evolve DNA 40 clone temp control - first look | ALL ABOUT E-CIGARETTES UK

Nice Bob,have you ordered?

 

[Pictor]

M65 - needs a battery but has better colour range and is thinner (width)
M80 - built in high power LiPo battery, limited colours, wider
MVP3 - built in battery (no details as to power), range of colours, looks to be the smallest of the 3 height wise

just my

Not enough information on size etc. to form an opinion really. Apart from the 50w iStick, any new mini one would have to be something very attractive, and very innovative for me to want one.

Like I said before that many new things coming to the market, I'm just glad I'm on a tight budget or I'd be buying all of them.
Hopefully they'll all be out and tested and reviewed before I buy again.

Too many really - it's nice watching for the 'next big thing', but if they come along at this rate, it'll perhaps get a bit monotonous unless there's something very special.

 

[Davantrac]

Not enough information on size etc. to form an opinion really. Apart from the 50w iStick, any new mini one would have to be something very attractive, and very innovative for me to want one.

Too many really - it's nice watching for the 'next big thing', but if they come along at this rate, it'll perhaps get a bit monotonous unless there's something very special.

This is getting added to all the time now, nothing to do with me apart from a few ideas. It's got some very good info on it.
https://docs.google.com/spreadsheets/d/1-z_V674p-5HYa9uzMqj1mq67da8-hnOOh2NNB2-ifgI/edit?usp=sharing

 

[terry w]

Terry Ry4 02/01/15 RyWhore 04/12/14

Well marcus there is no reason not to get stuck into the RY ..... mate, as it was made about 6 weeks ago !

 

[Brynglas]

Mini vapemail from Mr Dibley


View attachment 405683 View attachment 405684


And have ordered a bell cap for the KFV4 from Ian's shop.

 

[Bobw1951]

Nice Bob,have you ordered?

Seems to be a bit of a hassle, will wait for it to come on Ali E , have sent the Ali B link to AngelFireMods to see if they are interested in stocking it as It could well be a best seller for them

 

[terry w]

View attachment 405658

First thing,sorry for the poor picture.Phone camera

Had a play this morning and got my V4 coiled and wicked.
Plonked it on an istick to give a size comparison.

Easy to build on,Did 7 wraps of 28g Kanthal on a 2.5 size coiler.Came a little higher than i wanted at 1.6 ohms.

Very pleased overall,good flavour,good vapour and not the tight draw i expected.


Words for Terry,if you're in any doubt mate,don't worry, they are great.I'd get them ordered if i were you.

I`m still mulling over them George There is that many to choose from on FT ! Which version did you get ? I am also very tempted by that vapor flask what bob linked. Seems a good deal for 43 quid.

 

[Brynglas]

Which version did you get ?

This one Tel,under £14,complete bargain.May go for another.

https://www.fasttech.com/p/2018000

 

[Brynglas]

Seems to be a bit of a hassle, will wait for it to come on Ali E , have sent the Ali B link to AngelFireMods to see if they are interested in stocking it as It could well be a best seller for them

I contacted them before Bob,reply for a single item $90 including shipping.They only use DHL by the looks of it,won't post.

 

[dw117]

I`m still mulling over them George There is that many to choose from on FT !

Another day, another Kayfun v4 clone on fasttech...

 

[Bobw1951]

This is getting added to all the time now, nothing to do with me apart from a few ideas. It's got some very good info on it.
https://docs.google.com/spreadsheets/d/1-z_V674p-5HYa9uzMqj1mq67da8-hnOOh2NNB2-ifgI/edit?usp=sharing

line 41 needs deleting, it just shows another link to previous entries, and I thought I added the Zero Gravity Sensor Mod but it's not there

 

[Davantrac]

line 41 needs deleting, it just shows another link to previous entries, and I thought I added the Zero Gravity Sensor Mod but it's not there

There is a zero mod on line 17 don't know if that's yours though. Like I say it has nothing to do with me.

 

[Bobw1951]

I contacted them before Bob,reply for a single item $90 including shipping.They only use DHL by the looks of it,won't post.

AFM says they have already ordered some and it is not a cloned chip, and they should be in stock in the next few days, also that there is another product in the pipeline that will do Temp Sensing on both Ni200 AND Kanthal. For the Vaporflask think price may be about £80 to £100 if you factor in the shipping & VAT/Import duties, but I would be willing to pay up to £120 which would still be half the price of an original VF

 

[Brynglas]

AFM says they have already ordered some and it is not a cloned chip, and they should be in stock in the next few days, also that there is another product in the pipeline that will do Temp Sensing on both Ni200 AND Kanthal. For the Vaporflask think price may be about £80 to £100 if you factor in the shipping & VAT/Import duties, but I would be willing to pay up to £120 which would still be half the price of an original VF

Very interested in one of those Bob,if i miss anything can you keep us up to date please.

 

[terry w]

This one Tel,under £14,complete bargain.May go for another.

https://www.fasttech.com/p/2018000

Funnily enough George that is the one i have been looking at, it seems to have some really good reviews !

 

[Brynglas]

Funnily enough George that is the one i have been looking at, it seems to have some really good reviews !

I am very very pleasantly surprised Terry.There's no way an original is 10X's better than this,seeing as it's almost that much more money.
If you order only one mate,you've got to try it.

 

[trouble1000]

Mini vapemail from Mr Dibley


View attachment 405683 View attachment 405684


And have ordered a bell cap for the KFV4 from Ian's shop.

Every time I look on the e-cig city site there's never any tips showing George, how did you manage to bag those Dibley tips mate ?? I only really go for the straight ones from Gary, but I do like the look of those two

I've got shares in FT, thought you knew that

I`m still mulling over them George There is that many to choose from on FT ! Which version did you get ? I am also very tempted by that vapor flask what bob linked. Seems a good deal for 43 quid.

Just buy one of each style mate, problem sorted

Must admit I do like the look of the new Infinite black one listed today

 

[trouble1000]

This ones for you Terry

Did an experiment today with the Lemo. When I rebuilt it yesterday, as you know I kept the same coil. But this time I left longer wick tails (about 10-12 mm), still thinned them out and I flared them out more - like a fan effect. Normally I cut them really short, thin them out so I can almost see through the tails and I don't fan out the tails much.

Today, I had to keep tilting the Lemo so that air bubbles would appear. If I didn't do this, I was starting to get dry hits. Also I had to turn the power on the iStick down by a watt or so. Also I torqued the parts down a bit tighter than normal

So I'll be going back to my usual wicks. Tails about 6-8mm protruding from the coil and not fanned out as much. They don't connect with the horizontal part of the juice channels, so there's nothing to block the flow of juice.

Don't know if any of this helps, but I thought I'd give it a go