Fasttech Veterans

[Pictor]

Not necessarily 5w is supposed to be it's lowest level but there is still the problem of step down which could still cause problems at low wattages, but as it has a greater resistance range 0.4 - 5.0 it should be better, I would like to see a chart similar to the one posted for the original istick to show the regulated wattages for each resistance

Sounds like a fairly big step in the right direction

Heating just come back on - turned out to be the motor for the pump that had failed, just got to wait for the rooms to warm back up - brrrr

That's a long time with no heating! Especially on such a cold day! Glad you finally have it fixed.

Well we look after each other trish Not tried the fruition, but will do one day ! Is that the one with licorice in it ?

Supposedly, but I didn't really taste any ..just a good fruit taste. I may get that one again.

Gawd, He`s not at it again is he.

 

[trouble1000]

Right I'm back from greasing my pole while vaping the juice that Terry didn't like

I've been busy tonight, came home and ripped the experimental wick out of the Lemo and popped in my normal tried and tested wick. Then, after putting even more items in my FT wishlist I decided to do some research and came across the "Goblin" by Youde - no smutty jokes please Searched everywhere for a place that had them in stock, finally managed to order one from Vaporiz'Arte in Portugal. Only 4 Euros for 4 day shipping, so altogether it's cost me £33.22 with postage. BA is listing them, but their out of stock.

The Goblin gets some great reviews, it's a fairly small size (so should look good on a 50 watt iStick when I finally get one), it has massive airflow and huge wicking capability.

Here's one to have a look at :

http://www.yourcig.com/product/goblin-rba.html

 

[trouble1000]

Glad you got the heating fixed Bob and I'm glad your pressure is still ok George.

And Terry, Trisha, Adam, Vince and Marcus, I'm just glad to say hello

 

[trouble1000]

Oooohhh post 5000, just spotted that one.

Terry, you need to slow down a bit mate, so I can catch up

 

[terry w]

Right I'm back from greasing my pole while vaping the juice that Terry didn't like

I've been busy tonight, came home and ripped the experimental wick out of the Lemo and popped in my normal tried and tested wick. Then, after putting even more items in my FT wishlist I decided to do some research and came across the "Goblin" by Youde - no smutty jokes please Searched everywhere for a place that had them in stock, finally managed to order one from Vaporiz'Arte in Portugal. Only 4 Euros for 4 day shipping, so altogether it's cost me £33.22 with postage. BA is listing them, but their out of stock.

The Goblin gets some great reviews, it's a fairly small size (so should look good on a 50 watt iStick when I finally get one), it has massive airflow and huge wicking capability.

Here's one to have a look at :

http://www.yourcig.com/product/goblin-rba.html

They do look ok them Ian, shame they are only 3 mil though, I`m getting sick of filling these lemo`s up Might try one though when FT get then in

 

[terry w]

Oooohhh post 5000, just spotted that one.

Terry, you need to slow down a bit mate, so I can catch up

Keep going mate, Keep going

 

[terry w]

George, sorry mate but i emptied the piggy bank today Got meself one of them coil masters, not got a clue how they work though !

 

[trouble1000]

They do look ok them Ian, shame they are only 3 mil though, I`m getting sick of filling these lemo`s up Might try one though when FT get then in

That's the only downside mate, the juice capacity. But looking at the post hole height, I reckon there's less risk of juice leaks. The Lemo lasts me a day at work, so I can't see me taking the Goblin to work If it's as good as I hope it is, I'll probably get another when FT get them

Keep going mate, Keep going

You need to stop posting for a week, so I can catch up

 

[trouble1000]

George, sorry mate but i emptied the piggy bank today Got meself one of them coil masters, not got a clue how they work though !

which one did you get Terry ??

From the reviews I've seen, some people prefer the Kuro coiler, others like the Coil master better. Just depends if you want 3 coilers for each size wick, or 1 coiler for all sizes of wick. Personally, I think the Kuro coiler looks better made, but that's just my opinion

 

[Brynglas]

I decided to do some research and came across the "Goblin" by Youde - no smutty jokes please Searched everywhere for a place that had them in stock, finally managed to order one from Vaporiz'Arte in Portugal. Only 4 Euros for 4 day shipping, so altogether it's cost me £33.22 with postage. BA is listing them, but their out of stock.

Do you have the link for Portugal Ian.
Even if i'm not buying ,i like doing a bit of window shopping.
That boilers a mystery mate,good as gold all day.Slept poorly last night waiting to see if the pipes started to make expansion noises this morning

 

[trouble1000]

Do you have the link for Portugal Ian.
Even if i'm not buying ,i like doing a bit of window shopping.
That boilers a mystery mate,good as gold all day.Slept poorly last night waiting to see if the pipes started to make expansion noises this morning

Here you go George :

YOUDE GOBLIN RTA - Vaporiz'Arte

They also do a fair range of liquids too - GVC, Halo, Suicide Bunny, Virgin Vapour and Elysian E-Lixirs. Postage seems pretty reasonable too mate

At least you'll sleep well tonight mate. Just don't be dreaming about me pole dancing

 

[terry w]

which one did you get Terry ??

From the reviews I've seen, some people prefer the Kuro coiler, others like the Coil master better. Just depends if you want 3 coilers for each size wick, or 1 coiler for all sizes of wick. Personally, I think the Kuro coiler looks better made, but that's just my opinion

I just got THIS one Ian, i only got it to use up the rest of my piggy bank

 

[trouble1000]

I just got THIS one Ian, i only got it to use up the rest of my piggy bank

Have a search on Todd's site mate, he did a review of that one as well as the Kuro coiler - the genuine ones obviously

You basically change the rod size for whatever coil diameter you want. You'll soon suss it out when it arrives

 

[trouble1000]

Well better get to bed now, up before 6 tomorrow.

Night all and remember, if the pole is very slippery, there's too much grease on it

 

[dw117]

Something for you orchid lovers on FT today:

$12.69 Orchid Mini Styled RTA Rebuildable Tank Atomizer - stainless steel + PMMA tank / 23mm diameter at FastTech - Worldwide Free Shipping

Chimney looks nice and fat.

 

[Bobw1951]

Ordered one of these yesterday and it has already shipped : VAPOR FLASK DNA 40 STYLE 510 VARIABLE WATTAGE MOD - SILVER, ALUMINUM Alloy, 2 X 18650, NO USB CHARGING, Temperature Control - 3FVape

 

[vince01]

Something for you orchid lovers on FT today:

$12.69 Orchid Mini Styled RTA Rebuildable Tank Atomizer - stainless steel + PMMA tank / 23mm diameter at FastTech - Worldwide Free Shipping

Chimney looks nice and fat.

I looked at that but the chimney is what would prevent it being interchangeable with the V6 base

I think a better option would be a V2 replacement tank & chimney

 

[Bobw1951]

Right I'm back from greasing my pole while vaping the juice that Terry didn't like

I've been busy tonight, came home and ripped the experimental wick out of the Lemo and popped in my normal tried and tested wick. Then, after putting even more items in my FT wishlist I decided to do some research and came across the "Goblin" by Youde - no smutty jokes please Searched everywhere for a place that had them in stock, finally managed to order one from Vaporiz'Arte in Portugal. Only 4 Euros for 4 day shipping, so altogether it's cost me £33.22 with postage. BA is listing them, but their out of stock.

The Goblin gets some great reviews, it's a fairly small size (so should look good on a 50 watt iStick when I finally get one), it has massive airflow and huge wicking capability.

Here's one to have a look at :

http://www.yourcig.com/product/goblin-rba.html

He was one mad ......er, see how he built it, and why use side nips to cut the cotton, I find scissors a lot easier, but the atty looks good, shame about the size, another one that will need an extension kit for more juice.

 

[Bobw1951]

If anyone is interested:
http://s895.photobucket.com/user/Sopkatchl/media/imagejpg1-9.jpg.html

I might go on the Saturday

 

[Davantrac]

Ordered one of these yesterday and it has already shipped : VAPOR FLASK DNA 40 STYLE 510 VARIABLE WATTAGE MOD - SILVER, ALUMINUM Alloy, 2 X 18650, NO USB CHARGING, Temperature Control - 3FVape

Another one, your collection must be getting out of hand by now would love see them all together but you'll need a wide angle lens on your camera.