Fasttech Veterans

[Bobw1951]

Pass re the size, but it's definitely smaller than you would think

Googling says Annealed is softer and easier to work with so I would go with that

 

[Brynglas]

View attachment 407620

They have this at P-Vaper was only planning on buying 10m for now.Double the price of Stealth vapour.
Stealth have tempered but no annealed.

 

[Bobw1951]

View attachment 407620

They have this at P-Vaper was only planning on buying 10m for now.Double the price of Stealth vapour.
Stealth have tempered but no annealed.

That is very expensive, just been googling and found 29g for a fiver 25mtrs NICHROME NI200 WIRE - ANGELFIREMODS

 

[Davantrac]

A question about this forum.

I have just received a private message saying that had been offensive and my offence had been edited.
I haven't made any posts at all today. I have apologised and asked for the offence to be pointed out to me so I could see it myself.
I am never offensive to anyone on any forum at all.

Could they have mistaken me for someone else and will they answer my message.

 

[dw117]

A question about this forum.

I have just received a private message saying that had been offensive and my offence had been edited.
I haven't made any posts at all today. I have apologised and asked for the offence to be pointed out to me so I could see it myself.
I am never offensive to anyone on any forum at all.

Could they have mistaken me for someone else and will they answer my message.

Not sure mate but I would imagine so. If you click on your username at the top it will list all your posts so you could go back and look at your recent posts and see if any have been edited?

Could be from any time though I guess...

 

[dw117]

Also spoke to Ash from myepack just now about the problem I was having with my subtank mini.

He said that they've sold about 1000 subtank minis and a few of them have had this issue. He's just going to send out a replacement subtank mini base for me, after checking that it works like it should. I don't even have to send him back the faulty one.

A bit difficult to get hold of as Bob mentioned but really good service once I did phone when he was in so another thumbs up for myepack from me.

 

[Davantrac]

Not sure mate but I would imagine so. If you click on your username at the top it will list all your posts so you could go back and look at your recent posts and see if any have been edited?

Could be from any time though I guess...

Thanks for the reply.
I got a reply pretty quickly and it was me that was at fault. The offence I committed was my avatar picture of a gorilla flipping the finger, which has now been replaced.
If anyone in this group spotted it and was offended in any way then I truly apologise.
Dave.

 

[Pictor]

Thanks for the reply.
I got a reply pretty quickly and it was me that was at fault. The offence I committed was my avatar picture of a gorilla flipping the finger, which has now been replaced.
If anyone in this group spotted it and was offended in any way then I truly apologise.
Dave.

It certainly wasn't me - it would have to be something directed at me for a start.
But, I did almost mention initially that it did have the effect of feeling direct ..suppose I got used to it after a while though!
Even before I read your posts, as soon as I saw the new one, I thought how the 'snaggle tooth' one was an improvement ...but no, certainly didn't offend me. Could have been a moderator though.

 

[Davantrac]

I'm not asking who it was Pictor. I just want to apologise if my mistake did offend. My sense of humour is not everyone's taste and will be more careful in future.
Thanks for sharing your thoughts though.

 

[terry w]

I'd e-mail them to ask when they think they will have more stock in.

I kept checking their site for Ni200 wire a while ago and eventually after a week or so I think I e-mailed and they said something like "we do have that in stock I think the website just hasn't been updated yet so check back later today"

and viola there it was.

Just dropped them an email adam.

 

[dw117]

Thanks for the reply.
I got a reply pretty quickly and it was me that was at fault. The offence I committed was my avatar picture of a gorilla flipping the finger, which has now been replaced.
If anyone in this group spotted it and was offended in any way then I truly apologise.
Dave.

No problem here mate. Probably a moderator just wanting to keep the forums as clean as possible so probably best to just forget about it and keep on

 

[Pictor]

I'm not asking who it was Pictor. I just want to apologise if my mistake did offend. My sense of humour is not everyone's taste and will be more careful in future.
Thanks for sharing your thoughts though.

I know you weren't asking ..just wanted to reassure you - not nice having an 'elephant in the room'
I've seen worse than the original gorilla anyway ...not here of course

My guess would be it's down to a moderator covering all bases! So don't feel bad!

 

[terry w]

certainly didn't offend me. Could have been a moderator though.

Me neither, and it more than likely was a moderator !

 

[Brynglas]

my avatar picture of a gorilla flipping the finger

Sorry Dave,but that's bloody funny.

I missed that one.There's always someone will take offence,even when it's obvious something has been done in jest.
PC strikes again.

 

[Brynglas]

I see Spiritus have got Goose Juice back in stock.Shame they didn't do the larger bottles.
vaping it this afternoon, so good.


Edit: Sold out,it was available this afternoon, and i thought i'll order that later.

 

[Bobw1951]

Been playing with the Tobeco KF4 and did a 1.7 build on it, quite easy to put the coil on the deck as the screws are better than the KFL, what I did was open all 4 screws wrap the leg behind the 1st then past the second before bringing the leg back and tightening both screws down so trapping it under 2 screws.

Wicked it with rayon and then put it on my P3, had a few puffs and thought need more air flow, let's remove the afc screw so went to take it off and the blinking P3 connector is stuck to the atty - have tried everything to get it unscrewed from it, except putting it in the fridge, so letting it cool down and will give it another go, and maybe put it in the fridge, if I still can't shift it.

 

[Pictor]

I see Spiritus have got Goose Juice back in stock.Shame they didn't do the larger bottles.
Vaping it this afternoon, so good.

Edit: Sold out,it was available this afternoon, and i thought i'll order that later.

Perhaps another had been added on the wrong page - I got this email at 2.30 this afternoon, and it states that the Quacks hasn't arrived yet:

Bombies: New flavour and restock

 

[terry w]

I see Spiritus have got Goose Juice back in stock.Shame they didn't do the larger bottles.
Vaping it this afternoon, so good.


Edit: Sold out,it was available this afternoon, and i thought i'll order that later.

Mine arrived from ireland today george I`ll leave it to steep until i have finished this bottle of captain custard though. My batteries were also dispatched fro ecolux, so it`s just a case of finding the wire now. I sent an email to the vape mesh company, but no reply yet.

Been playing with the Tobeco KF4 and did a 1.7 build on it, quite easy to put the coil on the deck as the screws are better than the KFL, what I did was open all 4 screws wrap the leg behind the 1st then past the second before bringing the leg back and tightening both screws down so trapping it under 2 screws.

Wicked it with rayon and then put it on my P3, had a few puffs and thought need more air flow, let's remove the afc screw so went to take it off and the blinking P3 connector is stuck to the atty - have tried everything to get it unscrewed from it, except putting it in the fridge, so letting it cool down and will give it another go, and maybe put it in the fridge, if I still can't shift it.

Dig them marigolds out Bob, they work a treat for them sort of problems.

 

[Brynglas]

Mine arrived from ireland today george I`ll leave it to steep until i have finished this bottle of captain custard though. My batteries were also dispatched fro ecolux, so it`s just a case of finding the wire now. I sent an email to the vape mesh company, but no reply yet.

Have you checked your tracking Terry.My Flask has landed in the U.K
(pity F.T isn't this fast).

 

[Brynglas]

Perhaps another had been added on the wrong page - I got this email at 2.30 this afternoon, and it states that the Quacks hasn't arrived yet:

Bombies: New flavour and restock

Phew,i thought i'd missed it.Heads spinning trying to find this Ni wire today,i've found every gauge but 28. (No that's a lie i found 28 aswell but they wanted double the cost of every where else).