Fasttech Veterans
- Thread starter trouble1000
- Start date
- th_trl_thread_readers 0
- Status
I'm wanting to build one of these but don't know what motor is needed. Any ideas?
@Bobw1951
Good result Bob,were they all off duty coppers?
Good result Bob,were they all off duty coppers?
Terry
How's Maya with the fireworks.Roxy hates them barking,whimpering ,shaking the lot.
How's Maya with the fireworks.Roxy hates them barking,whimpering ,shaking the lot.
Exactly the same Marcus, she has been under my legs shaking most of the night
Exactly the same Marcus, she has been under my legs shaking most of the night
Hopefully this is the last night of the fireworks .My old dog a lab would sleep through anything,nothing bothered her.Couldnt hear the fireworks through her snores
Exactly the same Marcus, she has been under my legs shaking most of the night
Luckily, we've never had a dog that's shown any fear with thunder or fireworks ...we just make sure we register no reaction and when they initially jump up alarmed, we just tell them all is fine.
We did treat Sophie a little differently, as her first year she was truly hyper, so by November, we made sure she'd be OK and used Zylkene from November 1st - and later the next year when she started having seizures every time the groomers came, we gave her the Zylkene again for three days before they were due and four days after - works very well and she's only had one seizure since, and that was 3 years ago when we'd forgotten to give her the capsules until the last minute.
We haven't needed to give her anything for fireworks though since that first year.
May be worth you trying them (they can be bought in smallish quantities) around New Years Eve.
That took me a few seconds
, we do have the Met Police in the Ryman Premier, but they are based at Thames Ditton (near Hampton Court) and are nothing to do with Hendon fc, who play at Harrow Borough, even though Hendon is where the Met training school is.
Not if you have any Hindis nearby, Diwali is from 11th-15thHopefully this is the last night of the fireworks .My old dog a lab would sleep through anything,nothing bothered her.Couldnt hear the fireworks through her snores
Triton 2
Comes with 0.5 clapton coil installed plus a spare 1.8 kanthal coil (would have preferred the spare to have been one of the new Ni or the 0.4 steel ones that come with the v1).
Recommended wattage for the clapton is 40-45w but I found that too hot for me, and 35w seems to be better, no real difference in fully open airflow, if you used to keep the top ones on the v1 closed, filling is a lot better and when you screw the top back on it will turn the bottom half of the top back to the closed position (smoking icon) once it is tight enough.
Comes with 0.5 clapton coil installed plus a spare 1.8 kanthal coil (would have preferred the spare to have been one of the new Ni or the 0.4 steel ones that come with the v1).
Recommended wattage for the clapton is 40-45w but I found that too hot for me, and 35w seems to be better, no real difference in fully open airflow, if you used to keep the top ones on the v1 closed, filling is a lot better and when you screw the top back on it will turn the bottom half of the top back to the closed position (smoking icon) once it is tight enough.
Mmm, how many mods will that make Bob, 1 for everyday, of the year
nowhere near, one for every week maybe:On the go at the moment 18 regulated mods + 4 regulated squonkers, 2 mechs + 2 mech squonkers, 2 semi-mechs, 25 TC Mods + 3 TC squonkers, 6 of all those have drippers on top so are not used daily
@Bobw1951 @terry w
Have either of you tried this wire?
NiFe30 Wire
And here is what Stealthvape say about it....
NiFe30 Temperature Control Wire | Planet of the Vapes
Have either of you tried this wire?
NiFe30 Wire
And here is what Stealthvape say about it....
NiFe30 Temperature Control Wire | Planet of the Vapes
Not yet, but it sounds like good stuff, so will give it a try...
Can`t say i have George, let me know how it is ! Does it only work with DNA 200 Mods though ?
Until they find out the Nickel Purity setting, then yes DNA200 only, once they have the NP figure then you should be able to use it on DNA40 by reducing the temp & wattage, and some Chinese TC mods that allow NP setting.
Guess i've let the cat out of the bag, regarding what vapemail i'm expecting next week
- Status
Similar threads
