Gone back to using my Kanger IPOW2.
I'll have a look at it when it finally arrives, I either tend to stick with the stock DTs or use ones I already haveVince got back to me re: the Aromamizer drip tips...
The cost is £10 plus post to have your top cap machined so it will take any 510 drip tip.
Edit: Still no word from SV regarding SS wire
I really like his tips. I wanted to order but he only does big bite. Nothing small. I like a 3.5-4mm bore. With around a cigarette size tip. Nobody seems to do those! It's a shame. I really like his work and prices ar reasonable. Really nice stuff you have there.Some nice looking tips being made by Vince(Vinces tips on FB) for the Aromamizer,i think it means sending your chimney section/top cap for machining 'tho.
View attachment 515470 View attachment 515471 View attachment 515472
So even steeping overnight. Even the juice in my tank the difference is huge. The small batch must have been unintentionally ignored or something. Too bad I mucked around with the other big batch and messed up the ratios. It's about 60ml and I don't have much concentrate left so I may just try to add the rest of the concentrate then just up the base w little and see. I feel like the 60ml batch is off by about 1/3 or so. Thanks for your feedback. I'm surprised at how different it is even in twelve hours.I've only ever had the ready made so far (mine is in a VG base), and it's always been around a week steeped before I've tried it.
I've just got some 0mg QOP last week, so will try some later today when I get more time.
I did read somewhere (a supplier) that smaller bottles steep faster than large sizes. I doubt if I'd expect the proper flavour immediately from freshly made, so would put a little in a small bottle if you have one and definitely wait a few days.
Yes I know - the quotes were all over the place. I was trying to multi quote to Hooligan too, but it just kept using only one quote!
We had a FAP01 on the landing as smells and smoke would drift up from the hall, and it was very efficient, but always made the carpet grimy. Easily cleaned off funnily enough.
Don't have one up there now, just the Bionaire in here.
Looks very similar![]()
I really like his tips. I wanted to order but he only does big bite. Nothing small. I like a 3.5-4mm bore. With around a cigarette size tip. Nobody seems to do those! It's a shame. I really like his work and prices ar reasonable. Really nice stuff you have there.
I'll have a look at it when it finally arrives, I either tend to stick with the stock DTs or use ones I already have
You could try here, these are a few I bought from him:I really like his tips. I wanted to order but he only does big bite. Nothing small. I like a 3.5-4mm bore. With around a cigarette size tip. Nobody seems to do those! It's a shame. I really like his work and prices ar reasonable. Really nice stuff you have there.
Stop It - I will resist - I want to see a proper review of it firstLooks like the new Aspire tank is going to be sub £20 Bob.I think it's Puremist that has a pre order at that price,Seemed a good price to me.
Stop It - I will resist - I want to see a proper review of it first![]()
Bob those are really nice. Thank you I will look. I was very kindly given one by a member I met briefly in the kabuki thread. She had no use for small bore and vaped it forward to me. It's become my favorite tip.Stop It - I will resist - I want to see a proper review of it first![]()
When I first started vaping nearly 2 years ago, I could never find a tank that I really liked, also seeing as I spend most of my time now stuck at home looking after the missus, I tend to have as many mods/tanks as I have juices, so that I can chain vape all day long going from one to the next etc. I always look out for different ones to see if they will be any better than the previous ones.Bob those are really nice. Thank you I will look. I was very kindly given one by a member I met briefly in the kabuki thread. She had no use for small bore and vaped it forward to me. It's become my favorite tip.
The new tank looks really interesting. At $25 it's become very clear aspire is happy selling coils for the lions share of their profit. Which explains not including a triton rba and the high price (relatively) of it. Also it's 304 stainless. Personally I have no issues. I'm not a 316 snob. 304 is apparently easier to work with and substantially less expensive. Food grade is fine for me. It's clean and can be sterilized. And frankly I won't own any tanks long enough for them to rust unless I leave them soaking accidentally. Food grade is pretty rust resistant.
I hope to see a cleito (sp?) version that's for mouth to lung. I am not sure what benefit the attached to coil chimney offers if any and will look forward to a review also. I'm wondering if they will release a center portion for his tank that allows for a build deck. Overall it's nice to see them moving forward and clearly fashion is becoming. More and more important. We're talking in terms of inches for flavor differences these days. So it's time to focusing on other things. We all have favorite tanks and for me I have found that flavors taste way a or way b. And the amount of flavor varies slightly in the ones that all taste way a and the ones that all taste way b. For me only a few devices I've found taste way b with the majority tasting way a. The taifun vs gem is a prime example. Both amazing flavor but they taste completely different. Everything I own falls into one of those two flavor profiles though.
You seem to have a lot of gear. Do you find large differences for the way you vape original s it mostly about looks and air flow? Or are there minor differences and you snout finding those differences and looking for he best vape ? Or something I've missed? Build deck differences et.
That's fantastic!When I first started vaping nearly 2 years ago, I could never find a tank that I really liked, also seeing as I spend most of my time now stuck at home looking after the missus, I tend to have as many mods/tanks as I have juices, so that I can chain vape all day long going from one to the next etc. I always look out for different ones to see if they will be any better than the previous ones.
I did try a genesis type long time ago but couldn't get on with building mesh/steel wicks, so will not bother with those again, for rebuildables I prefer ones that can be built either "Kayfun" style, or similar to the Velocity. Now that Innokin have come out with iSub Nickel coils I might get a couple more of the "Apex" tanks.
Talking of Vape it Forward, a modder on one of the other forums sent me a made up multi ended charger lead for my Turnigy Accucell 6 so that I can charge LiPos with different connectors, I only asked him if he could point me to where I could get the correct one for his batteries.
No I don't believe 304 is welding wire. That's a much softer lower grade I believe isn't it? It's food grade for knives and bowls and such for sure. Welding wire. I don't think so.Isn't 304 SS wire what they use in mig welders.
Just saying because you can get a mile of the stuff for a fraction of buying from a vapestore.
I really like his tips. I wanted to order but he only does big bite. Nothing small. I like a 3.5-4mm bore. With around a cigarette size tip. Nobody seems to do those! It's a shame. I really like his work and prices ar reasonable. Really nice stuff you have there.
So even steeping overnight. Even the juice in my tank the difference is huge. The small batch must have been unintentionally ignored or something. Too bad I mucked around with the other big batch and messed up the ratios. It's about 60ml and I don't have much concentrate left so I may just try to add the rest of the concentrate then just up the base w little and see. I feel like the 60ml batch is off by about 1/3 or so. Thanks for your feedback. I'm surprised at how different it is even in twelve hours.
So I went back to the doctor today for the post op / pre op. Not great. Not bad. The prognosis is good because for the first ten days things were really good. But apparently my better half is right and I've been doing way too much including lying on my side/ sitting up hunched over in bed cooling in a microfiber towel. He said it was very clear from the way I explained the trouble I'm having and the fact I've gone backwards from days 11-20 that's didn't do what I was supposed to after surgery. I. E. Basically nothing. He reiterated nothing heavier than a Sunday paper to lift. No walking dogs. No sitting for more than 15 minutes at a time. Ih age to go back on the steroids now. Which I absolutely hate. They make me really jittery and I gain a ton of weight and my skin breaks out the from the first raise to a solid two weeks after I stop. I hate them. He also recommended against the other operation on the 30th but said it was my decision. I explained due to insurance I have to go through with it and he said it's imperative I am a better patient next time too. And in the two weeks leading up.
My girlfriend is real unhappy with me. So I better make peace with the triton mini and ego one clr coils. And just put my other tanks away so I don't say. Oh just coil this one this one time.
I'm waiting for vape mail. I got a really good deal on a mark bugs wae ii. It's an old DNA 30 chip device but pairs perfectly with the gem and I love the way the combo looks. For the price j couldn't pass it up.
I bought an Adele ticket this morning for my better half. The show sold out the arena in five minutes no couldn't get two tickets. But managed to get one which somehow randomly became available. It is remarkable how popular she is here.
Happy humpday!