Finding your fav taste

[ebbrey]

Alright my provari arrived today and ive started using it.. Question tho..

I bought some CE2 clearomizers 3.0 ohm and some Boge 2.0 ohm and 4 different juices (should have bought 20). The juice did not taste good in the clearomizers but the boges worked for me. The clearomizers was easy to fill. The boges i semed to burn a coupple of them before i put enough drops in there to make it work. And without a tank on the boge im afraid to get the burnt taste so i keep adding drops.

but hey back to my question..

If you guys wanna test different e liquids.. do you use a cartomizer for every taste? Or is there a good product to just drop a coupple drops in get a taste and clean easially if you get me

Thx in advance for replies

 

[liscombc]

Congrats on the provari!

I found CE2s to be tricky, I had to remove the plastic piece that covers the coil, leaving just the thin o-ring and a tip. That should work, but you will find you have to keep tipping it backwards or else it tastes burnt.

As for cartomizers, I would def buy a cheap tank for ~$10. I'm using the one from my LT and think it works great. Order some carts pre-punched with a flange (looks like metal wings on the end of them) and you wont have to worry about them burning. Also make the hole a bit bigger with a hammer and small screw driver or something.

As for testing liquids use an atomizer. It can be very difficult to get flavors out of cartomizers. CE2s work well cleaning wise, but I didn't like the flavor they produced. Get a couple 510 atomizers for this, and you should enjoy it.

I'm currently using a Ikenvape 3.5oHm cannon at 5 volts and liking it a lot. I use a 3oHm cartomizer with a 4ml tank when driving, but I can't seem to beat this atomizer, so I use it whenever I can.

 

[ebbrey]

I have slotted a boge with a dremel tool just like Pbusardo does in his vid on youtube, and fitted a Phiniac XL tank over it. That worked perfectly last night. It was "easy" to take a drag off it. The cartomizer made a nice crackling sound and the vapor was beyond my expectations.

Today tho.. It feels like its "flooded". No crackling sound and not much vapor. I have to take hard drags. And rarely hear the cartomizer crackling.

I will look into buying an atomizer to taste different juices. You just drip them alittle and puff away? And then clean them out?

 

[ebbrey]

Ok found out the problem.. the tank was creating a air tight seal between the bottom of the tank and the provari, not letting any air go trough atleast it semes the boge survived my frustration i kept the button in for a coupple secs without draggina few times to se if that would fix it

 

[Vidi]

Yeah my tank does that sometimes as well. I found just loosing it about a quarter turn works wonders for airflow.

I get my tanks from myfreedomsmokes. Cheap and work well. Also, weird thing: the attys that come with the tank have one hole, replacements have three. I prefer the three holed attys.

 

[ebbrey]

Prolly should have gone to a different forum to ask this but its kinda an follow up

So i got the atomizer, i bought this 510 Low Voltage Atomiser - Cloud 9 Vaping was prolly not right to buy the LR one but ill know that for next time.

Okay, so im ready to find my fav taste. From reading on the site that sells these they come with a cartridge or not and i didnt think about it much. I thought i could just drip a coupple drops down on the "bridge" put my drip tip on and vape away.
But then again, this came with a cartridge that looks like a mouthpiece with a filler in it.

Can i just throw this cartridge away? and drip (how many drops and on the bridge or "edges?) into the atomizer and vape? Or do i have to fill the filler in the cartridge and let it settle down on the bridge in the atomizer for it to get soaked from the cartridge to vape with this?

Have only used clearomizers and cartomizers so this is new to me.

Thx in advance for any replies

 

[Frick]

From the "Please Note" section of the link you posted:

Atomisers typically come with a blank mouthpiece (without filler), occasionally with filler in the mouthpiece and occasionally with no mouthpiece at all. This is beyond our control, but please be assured that atomisers are always the same high quality brand new items.

The part with the filler in it is an old-fashioned cartridge. They used to be called "three-piece" PVs because you had battery, atty and cartridge.

Feel free to throw the cartridge away and drip away on the atomizer. Start by testing it for "primer" (usually just flavorless PG, but sometimes it's some type of nasty oily stuff) by taking a light vape. If it produces vapor, it has primer in it. Get rid of that by either just dry-burning it (pressing the button without vaping) or vape it away without inhaling. Be careful not to burn it.

Then, put 8 drops onto the bridge and vape until it tastes dry again, then 3 drops each time to replenish it. You mileage may vary slightly, but that's a good rule of thumb.

Enjoy.

 

[ebbrey]

Great!

And it did produce vapor. But i only had to take 4 light vapes wihtout inhaling before it didnt anymore

Thx alot