I noticed with my firing button if it turns the tiniest little bit to the right it locks and wont fire. I am aware of the safety to keep from accidental firing in pocket but sometimes while pushing the button down it will turn and then the next time it is locked.Then I have to take off the brass button cover, twist the button back then put the brass back on. Was wondering if all are like this or is mine special!
firing button question
- Thread starter vapnmuse
- Start date
- th_trl_thread_readers 0
- Status
Why don't you just turn the brass button. There's no need to take it off. If you have to remove the button it sounds like it isn't mounted on the firing button tight enough. If the button isn't tight lay a piece of dental floss across the top of the firing button. Make sure the firing button is in the "off" position. THen press the button cover down. THat should snug it up.
Last edited:
The way I hold mine allows me to kind of apply a turning pressure to the left so that never happens. But I think I hold my reos weirdly Lol
Since I've gotten the button covers, I find I could "accidentally" switch it off, too. I naturally find myself doing a "counter-clockwise" swipe like you, Miarose, when I vape. That trick works for "button up" or "button down" style Reo tootin'. There should be no need to remove the cover, though...Hmmm...
I have to apply even, center press from the top- have a tendency to press from the side and it won't fire.
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
I have the delrin cover and I noticed that it spins to lock sometimes also. The cap is kind of a loose fit and tends to just spin when I try to unlock it. I'm thinking about gluing it down.
I wouldnt glue it. Just put a small piece of dental floss over the top of the firing button then push the button cover down. That should snug it up and more importantly it can still be popped off otherwise you won't be able to take the firing pin out (without damaging it) if the need should arise.
Thanks Itrainer for the dental floss tip. the brass cover is loose and does not grip the button. If I lay the mod down the button falls off. The button moves 1/32 of an inch and is locked.
in my excitement to set up my new mod I did not even notice a piece of thread with the cover, I was a kid at Christmas that day!!
Ok now that that problem is solved I think its time for some official ceremonies. Since you posted a pic of your new mod you are now considered part of elite group of vapers. You are a Reonaut. Every new Reonaut is welcomed to Reoville with the official Reonaut badge. Wear it with pride and keep it shiny. Without further aaado boo boo here's your badge.
- Status
