Flash-e-Vapor V2 rba by Artur Schwarze
- Thread starter dice57
- Start date
- th_trl_thread_readers 0
- Status
BTW, shipping from PB-Dampfer is 10 euros (I know that because that's where I plan on ordering the Dicodes 2380)
Check these sites too though, or try emailing the maker to order and see how much that costs.
THE WGU CLUB
Card Carrying Member/Co-Founder
Check these sites too though, or try emailing the maker to order and see how much that costs.
THE WGU CLUB
Card Carrying Member/Co-Founder
I'm still waiting on my clone glass. It was shipped April 29, and its still sitting in China for some reason.
But, I don't see the value of a $100 glass kit myself. You could almost get another Flash e for that.
But, I don't see the value of a $100 glass kit myself. You could almost get another Flash e for that.
Well, it's more like $75 at PB-D, and rounding up from $90 still gets a finger wag.
I agree though, lol
The reason why it does costs that much, is because it needs to come with a new top cap and a couple other pieces besides the glass, because stock pieces wouldn't support it, not to mention the glass takes the place two pieces.
If it was closer to 60ish shipped though, I think someone who really wants glass in their FeV (vapes tanks crackers AND wants to see juice, or just really loves the look), it's not too far out of bounds compared to accessories for other high end authentic attys
THE WGU CLUB
Card Carrying Member/Co-Founder
If my Android emojis still worked with the new site, I would use the shocked hands on face one, lolWell, I agree, some won't care about the price, and will want it. Me, I would just put the metal tank on, but we all know I'm poor and cheap
If I like my clone glass, I will commit blasphemy and put it on an authentic when I get one
I kid though
THE WGU CLUB
Card Carrying Member/Co-Founder
10.00 for glass hotcig tank at GB if you don't mind waiting.
But yeah I'm full stainless and like it better that way. The glass looks a lottle silly to me.. I have never even put the clear window on my v2
But yeah I'm full stainless and like it better that way. The glass looks a lottle silly to me.. I have never even put the clear window on my v2
I think glass in my attys looks seckzi (or poly if glass isn't available). I just like the look of it more than anything. Not as much about seeing juice levels, as seeing some perdy stainless internals with juice hugging all over them
THE WGU CLUB
Card Carrying Member/Co-Founder
Each his own.. I think the full stainless sleek outside looks hot.. Lol. I like blonds you may like brunette's no big deal. Lol
Want to order v3 what are the max watts I can push to it or is that build determined .can I sub ohm on it?I don't want to break such a expensive rta thank you.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Yes you can, the wires can handle plenty of power. The limiting factor is air flow and running a single coil. I'm vaping a .9 of 26 at 6-6.4v, 40-45w. No problem. And its a tobeco v2 that I've had for a year of every day all day vaping.
My last concern is vapor production and air flow I currently vape on artic sub ohm build a nuppin bottom feed atty and mophesto bottom feed atty. Can you compare them to it in terms of air flow thank you so much.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Well don't know about those. What size air holes do they have.
For a tank system the air flow is great, it hits like a dripper. So it feels like your vaping a dripper with 5ml capacity.
It all depends on how you vape.
Air screw out would probably be best for you. That's how I've always run mine. Its 2mm wide open on the v2. I think its bigger on the v3, anyone??
I just drilled mine out to ~ 2.5mm to run over 40w
I have drippers but prefer the flashi because it does have a unique vape with the air flow of a dripper. .
For a tank system the air flow is great, it hits like a dripper. So it feels like your vaping a dripper with 5ml capacity.
It all depends on how you vape.
Air screw out would probably be best for you. That's how I've always run mine. Its 2mm wide open on the v2. I think its bigger on the v3, anyone??
I just drilled mine out to ~ 2.5mm to run over 40w
I have drippers but prefer the flashi because it does have a unique vape with the air flow of a dripper. .
Airhole on the focal V3 clone is 3mm. Lung hits definitly doable. If you have the right equipment you could drill a second airhole to make it very open and dual coil. I've seen people do that, so I'm sure this works.
Or just drill the one airhole to 4mm or more.
The original V3 is 2,5 iirc. A little too restricted for my taste, but you can still lung hit it.
I have two glas kits from focal at home, but havent tried them yet. Prepare for some broken glas in your mail, out of the 3 kits I ordered, two preinstalled glas tanks were broken. They come with one replacement each, which luckily all were fine.
Or just drill the one airhole to 4mm or more.
The original V3 is 2,5 iirc. A little too restricted for my taste, but you can still lung hit it.
I have two glas kits from focal at home, but havent tried them yet. Prepare for some broken glas in your mail, out of the 3 kits I ordered, two preinstalled glas tanks were broken. They come with one replacement each, which luckily all were fine.
Last edited:
I think my glass tank is here, but I haven't opened it yet. Weird the tracking never updated, but that's ok
Franken-FeV, glas version.
Original deck, clone topcap, all the other parts from the focal glas kit.
Three fills in, no leaking so far. Will break easiely if dropped I imagine, the glas is pretty exposed.
I like the looks, it works, for 10 bucks it's a good deal.
I've got some super thick vg, thicker than vape shops watered down vaping VG. Anyway, my favorite way to help the feeder wicks when it slows down is to crack the very top cap till you hear the air suck in.
This let's some air into the tank around the air stem to release the vaccum.. Wick is nicely soaked again, no juice comes out the threads at all from the upper threads. when I was cracking the tank off the chamber, a very small amount would seep out the seam.
I just hate dry pulling, covering air hole, ect... This works great on the V2.
This let's some air into the tank around the air stem to release the vaccum.. Wick is nicely soaked again, no juice comes out the threads at all from the upper threads. when I was cracking the tank off the chamber, a very small amount would seep out the seam.
I just hate dry pulling, covering air hole, ect... This works great on the V2.
Last edited:
- Status
