Some more pics of the FeV dD
Verzonden vanaf mijn iPhone met Tapatalk
Flash-e-Vapor V2 rba by Artur Schwarze
- Thread starter dice57
- Start date
- th_trl_thread_readers 0
- Status
Some more pics of the FeV dD
Verzonden vanaf mijn iPhone met Tapatalk
Oh no, I edited that, I was thinking of something else. .
I would love to have dual AF
The WGU Club Co-Founder
Ahh ok, the biggest airscrew is 3mm, i'm now running without airscrew so i guess about 4mm. It vapes really good and the taste is great. In the picture of the tank you can see it has a reduced chamber. So taste is the same or beter
Verzonden vanaf mijn iPhone met Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
Well finally ended my foray with coil wrapped fiber feeders.
Mesh back in.. Much better feeding for 40w. Love that warning you get on the mesh feeders. Its so saturated with TH that when the tank is dry you notice it right away.. Even though the wick is still wet its not super saturated.
Mesh back in.. Much better feeding for 40w. Love that warning you get on the mesh feeders. Its so saturated with TH that when the tank is dry you notice it right away.. Even though the wick is still wet its not super saturated.
Kinda tempted to get a TC-mod for my FeVs.
Any reason NOT to get a Snow Wolf?
Sent from my iPhone using Tapatalk
Any reason NOT to get a Snow Wolf?
Sent from my iPhone using Tapatalk
I can't speak for or against the Snow Wolf as I never had one, but the, FeV, authentic anyway, is a solid performer with both my Vapor Flasks and my M Class.
Alas both of those are beyond my budget.
It's either Wolf or Joytech's latest, IPV4 is waaaaay to ugly!
Sent from my iPhone using Tapatalk
It's either Wolf or Joytech's latest, IPV4 is waaaaay to ugly!
Sent from my iPhone using Tapatalk
I don't like the ipv4 either. This summer brings an ipv d2 (think that's the name). Simple look to it that I do like. Looking forward to that one. HCigar is bringing us a C frame mod that's also good looking. I'm hearing $150 on the price though. Not sure I would pay that when the sx mini isn't much more.
I wasn't happy with the vape on my vs on the mini Nemi clone. I didn't want to build any lower as I wasn't leaving much safety margin for those little batteries as it was. So I rebuilt yesterday to 1.1 ohm and put it on a regulated mod and am happy again.
Funny how that same build works really well though in my Mini Buddha on a mini Nemi. The vs worked really well on a Stingray, but looked goofy.
So now I have an extra mini Nemi I'm not using, but maybe eventually I'll get a Gus A-t.
Funny how that same build works really well though in my Mini Buddha on a mini Nemi. The vs worked really well on a Stingray, but looked goofy.
So now I have an extra mini Nemi I'm not using, but maybe eventually I'll get a Gus A-t.
Vapemail came today! [emoji16]
Erm 1 question.. The largest weave mesh I have is 325. Is that gonna be able to keep up?? I just ordered some 110 on eBay but will this work until then? I filled it with a pg-heavier juice just in case...
Ok guys. I have to say.... I think I'm in love. I've been tooting on this thing all afternoon and evening and it's perfect. Plenty of airflow with the larger screw, it's totally silent too. No whooshing of whistling like 90% of my other attys. the 325 mesh is wicking fine too. If I were gonna get a dry hit I'd have had it by now. I bought the tank extension and the longer chimney but I really don't see myself ever using them.... She's perfect as is. Definitely my no.1 atty now.
Thanks Sedge for speaking so highly of it! It was the first high end atty I ordered (although the last one to arrive lol) and it was worth the wait.
Thanks Sedge for speaking so highly of it! It was the first high end atty I ordered (although the last one to arrive lol) and it was worth the wait.
Might wanna reconsider about lugging the FeV in me pocket.
With the clones 3 mm airhole she has a nasty habit of leaking.
Can't really do much about it, it's the nature of the beast.
Besides adding MORE cotton, there's NEVER ENOUGH COTTON!!
Sent from my iPhone using Tapatalk
With the clones 3 mm airhole she has a nasty habit of leaking.
Can't really do much about it, it's the nature of the beast.
Besides adding MORE cotton, there's NEVER ENOUGH COTTON!!
Sent from my iPhone using Tapatalk
In the 6 months of using FeVs (original, clones, and mixed) I got it to leak exactly once. A mesh straw fell out during filling without me noticing.
Check if the feeders are properly touching the wick, maybe.
I fill the deck with wick (rayon), too.
Check if the feeders are properly touching the wick, maybe.
I fill the deck with wick (rayon), too.
Last edited:
I've never had the V3 or VS leak on me at all, might have pulled the top off them from my pocket with my IPV2s attached but no leaks.
I run 200 mesh feeders with a 1.2mm air hole in the center and MaxVG juice.
My rayon only goes through the coils and is cut right at the end of the screw and fluffed up, exactly like jaxgator's wicking method from this post here.
Flash-e-Vapor V2 rba by Artur Schwarze | Page 34 | E-Cigarette Forum
I run 200 mesh feeders with a 1.2mm air hole in the center and MaxVG juice.
My rayon only goes through the coils and is cut right at the end of the screw and fluffed up, exactly like jaxgator's wicking method from this post here.
Flash-e-Vapor V2 rba by Artur Schwarze | Page 34 | E-Cigarette Forum
I've never had a leak in my FeV either, even with the af screw removed. I lay it flat on the couch beside me all the time too. No leaks.
It sounds to me that you are using a thinner juice and/or your feeder wick holes aren't tight enough allowing the chamber to flood causing the leak..
It sounds to me that you are using a thinner juice and/or your feeder wick holes aren't tight enough allowing the chamber to flood causing the leak..
Or the feeder wicks aren't touching the cotton wick. They should touch ever so gently without smashing them into the screw heads.
- Status
