I would quit the group and send a screencapture to Arthur.
Don't worry, though, you will always have US.
Don't worry, though, you will always have US.
Flash-e-Vapor V2 rba by Artur Schwarze
- Thread starter dice57
- Start date
- th_trl_thread_readers 0
- Status
Facebook is 90% cesspool with loudmouth, keyboard bullies around every turn. It gives people the chance to say things that they never would in a face to face setting.
You will find the largest collection of opinionated, pompous a-holes in most "Authentic" groups. To have some "group luser" have an issue with language in today's global society is totally unacceptable. Google does a semi decent job for reading translation but I would not use it for anything written.
I would make a post in the group about being called out for using English expressing your disgust, tag the user who PM'ed you and get a group decision about it.
I think you'll find that user is not part of the majority.
Thats more a general Facebook problem, I guess.
There is no information in that group you wouldn't get here, so just asked away.
There is no information in that group you wouldn't get here, so just asked away.
Did anyone happen to watch Todds review of Origen 16?
Kinda funny how unknown FEV really is.
Also very sad.
Kinda funny how unknown FEV really is.
Also very sad.
The only way we'll get a American review is if one of usdo it ourselves...
Hmm I've been taking a lot of videos lately.. Could do a review.. Taking about two years and still hardly anything beats it out.
Hmm I've been taking a lot of videos lately.. Could do a review.. Taking about two years and still hardly anything beats it out.
I finally found this again, and thought Id share it. I should see if I can repair my clone base.
First half is how to repair if the positive wire comes off and the second part has be stumped. Its in German of course, but Im sure its easy to figure out.
What is the little container he has on the side that he keeps dipping the solder tool in? I assume its some sort of cleaner?
First half is how to repair if the positive wire comes off and the second part has be stumped. Its in German of course, but Im sure its easy to figure out.
What is the little container he has on the side that he keeps dipping the solder tool in? I assume its some sort of cleaner?
Decided to give me Dripper some love pairing her up with my new Evic VT.
Gotta say this is one of the best, if not the best dripper been using, don't really care 'bout near short coils and 100+ watts of power.
Set her to 30 watts and squeez some juice inside and vape for days!
Well, not for days, but more than a dozen flavourfull drags.
Gotta say this is one of the best, if not the best dripper been using, don't really care 'bout near short coils and 100+ watts of power.
Set her to 30 watts and squeez some juice inside and vape for days!
Well, not for days, but more than a dozen flavourfull drags.
Yeah its the best dripper i have. The air hole placememt is tops and holds a ton of juice. I always use the long drip tip with the dripper.
Hey Jeremy, any ideas of how to get my tails to feed the liquid a bit better?
With wicks laid down like S my wicks never get completly dry EVEN when only using 20 watts.
Granted using 90% VG, but it's a bit of an pita.
Might wanna try something, that doesn't come in pads, muji or KGD ain't the best filler for this or anything in that matter.
With wicks laid down like S my wicks never get completly dry EVEN when only using 20 watts.
Granted using 90% VG, but it's a bit of an pita.
Might wanna try something, that doesn't come in pads, muji or KGD ain't the best filler for this or anything in that matter.
Use rayon.
Or even try thinning your tails with cotton.. A fat glob of wick on the deck is just that, imo.
Or even try thinning your tails with cotton.. A fat glob of wick on the deck is just that, imo.
Hello Fellow Flash-e-Fans.
Just popped in to say hello and keep this thread busy.
Question for those that have had theirs for over a year or so.
Have any of you used an ultrasound cleaner for the bases? I know that the newer FEVs do not have wired bases anymore, so I figure its safe. I know the base can be taken apart and I saw how to once, but cant remember how. I wanted to throw my bases in the ultra sound to make sure there is not any nasty liquids in there causing problems.
Just popped in to say hello and keep this thread busy.
Question for those that have had theirs for over a year or so.
Have any of you used an ultrasound cleaner for the bases? I know that the newer FEVs do not have wired bases anymore, so I figure its safe. I know the base can be taken apart and I saw how to once, but cant remember how. I wanted to throw my bases in the ultra sound to make sure there is not any nasty liquids in there causing problems.
Yeah not good idea, it wont get the inside. i recently posted about my two year old flash i decided to open up. The first clone version tobecco. I knew some liquid had weeped in over the years as it leaked out the 510 when shelved for a while.
Your best bet is to pull the 510 pin just enough to lay it to the side. Pull it out slow and the wire will come with it, let it hang out. also if you have room pull the gromet so you have more room for draining. Then you can rinse it in ultrasinic or with hot water then prop up for a day with pin out so the liquid can drain out.
The only problem is the wires are hot glued insideand, depending on brand and you definately risk breaking the solder.
With the 510 pin out you can also unscrew the base because the wire is loose it wont wrap up. The positive post doesnt come out as easily because of the hit glue and the wire will most likely break.
Your best bet is to pull the 510 pin just enough to lay it to the side. Pull it out slow and the wire will come with it, let it hang out. also if you have room pull the gromet so you have more room for draining. Then you can rinse it in ultrasinic or with hot water then prop up for a day with pin out so the liquid can drain out.
The only problem is the wires are hot glued insideand, depending on brand and you definately risk breaking the solder.
With the 510 pin out you can also unscrew the base because the wire is loose it wont wrap up. The positive post doesnt come out as easily because of the hit glue and the wire will most likely break.
I'm saying if it gets in, it won't get out without opening it to drain it... you could just do the outside quick but it wont do anything about the inside, the inside of the base is almost sealed.
Some newer versions are easier to take apart.. i would definately just take it apart if it is. The oring portion unscrews from the knurled section. Pull the 510 first to see if you have wires if you do leave the pin out and you can unscrew and open enough to get it clean while leaving wires attached.
Some newer versions are easier to take apart.. i would definately just take it apart if it is. The oring portion unscrews from the knurled section. Pull the 510 first to see if you have wires if you do leave the pin out and you can unscrew and open enough to get it clean while leaving wires attached.
Last edited:
Thank you JeremyR !!!! love these atties. Has anyone tried out the V4 and how does it compare?
I figure that the only difference is the air and the glass/ aesthetic changes.
I honestly love the look of the V3 with the chop kit or V2 tank configuration.
I figure that the only difference is the air and the glass/ aesthetic changes.
I honestly love the look of the V3 with the chop kit or V2 tank configuration.
- Status
