Focalecig ... A new Fasttech??

[Nikkita6]

Hi Nikkita, hit and run post

Hi fivefour ... just make sure that you eventually run back this way, and all is good. ;-) ... this post is like a hit and run with skid marks

 

[artv61]

Nikki, here's a picture I know you will find interesting.
4nine with an AGI on top.

Sent from my SCH-I605 using Tapatalk

 

[artv61]

sorry I didnt polish her up a bit.
A little old school with new

 

[Nikkita6]

Ha! I have an AGI also, but you have probably heard me speak of it. Looks like a sweet set up ya got there, and at least with the AGI you don't have to worry about your finger being placed over the air hole. And I have that Vapeporn drip too ... Libra's

Nikki, here's a picture I know you will find interesting.
4nine with an AGI on top.

Sent from my SCH-I605 using Tapatalk

 

[Laylel]

I don't think its ugly! I think it is so impressive that you made this yourself, you should feel so proud. And telling me that the copper kayfun is very very tasty of course makes me want it more ... Is it copper on the inside deck and chimney too?

I don't think it's copper. I think it's some kind of PVD coating just different color. It is kinda rose color))) Coating only on outside. Here one what i got Kayfun Lite Plus Kit Gold Black Rose Gold Atomizer RBA Kayfun Lite Kit by Ehpro | eBay fast shipping too.

O yes, i'm proud of myself. But this is just me, never good enough, need something better

 

[Laylel]

Which focalecig rba would you guys recommend for a newbie to mech mods?

I will say Kayfun, better if it lite, or lite plus. I agree with Nikki, best shot will be Kayfun lite+ V2.

 

[Laylel]

about 12113. tried to put base o-ring between the chamber and chimney. it didn't flush completely (maybe someone stronger could screw it 100%), so i left a gap, trusting in the seal capability of the ring. i also changed the build, and tried less cotton.
the result wasn't satisfactory. it went from semi-dry hits to flooding and leaking.
so removed the ring again. now it's working ok. a bit dry, but i think it's due to my last build and to my dense vg juice.
my conclusion is: pull out that base o-ring (you can try it between the two parts of the chimney, but it's not necessary at all), add an small o-ring to the bottom of the 510 pin, find a suitable build for your juice. and you'll have a pretty decent kfl: great vapor production and flavor.
however, i would not recommend this new version of 12113. it's more difficult to find the balance between wicking and flooding than in other kayfuns.

Glad to hear you some how made it work. Main are a troble. I got it to do a job, but i can't take it out, because random leaking problems, i can't chain vape it, because from nothing it's just dry hits...
I put o-ring in middle of chimney on one and it did rise a chimney but it dry hits bla-bla-bla
I just give up on it and they going in spare part box. I will join you with - i do not recommend it.

If you have any car dealership with garage around look at there's boxes... treasure box!!! i get all my o-rings from there, good rubber, any size, just need good bath before use. And they charge you a penny for 1 o-ring (i think guys who i get main from think i'm strange, as minimum you should see there's eyes when i was asking them few questions about soldering ss and copper, i cud see in it something like - what's wrong with you, should you go home and make a dinner )

 

[salemgold]

Sorry, I should have clarified that you cannot use the coupon codes on Group Buys and promotional sales, only on regularly priced items. Its appears that you have already successfully checked out on your Group Buy purchase, thank you Salem Gold, and Coriline for helping out.

Doris is one of my favorite vendors. I talk to her frequently at another place I had posted one of her sales and Willy PMd me about it. I linked him here to do some reading of satisfied customers.

 

[nelsonm64]

Mornin' Nicole,

the reason I say the Heron is a "kayfun killer" is mainly due to the flavor. the flavor is better than any other RTA I own. I think it's mainly due to a really small chamber and small diameter chimney. and so easy to fill, takes literally 5 seconds NO leaking, gurgling or dry hits, it just works! I've had it for about a week now and, it's what i'm using now for my ADV device... loving the crap out of it! I have 3 GP paps so, I need 2 more Heron's hahaha kidding...

 

[Nailz]

ohhhhh DNA 30 in new arrivals and takes 18650 battery, nice

*I do not need anymore mods, I do not need anymore mods, got to keep telling myself that

 

[haku]

Glad to hear you some how made it work. Main are a troble. I got it to do a job, but i can't take it out, because random leaking problems, i can't chain vape it, because from nothing it's just dry hits...
I put o-ring in middle of chimney on one and it did rise a chimney but it dry hits bla-bla-bla
I just give up on it and they going in spare part box. I will join you with - i do not recommend it.

If you have any car dealership with garage around look at there's boxes... treasure box!!! i get all my o-rings from there, good rubber, any size, just need good bath before use. And they charge you a penny for 1 o-ring (i think guys who i get main from think i'm strange, as minimum you should see there's eyes when i was asking them few questions about soldering ss and copper, i cud see in it something like - what's wrong with you, should you go home and make a dinner )

i'm getting semi dry hits when vape chaining, too. i'd return back this crappy kayfun if i get the chance. just hollar if you need my participation in any complaint to Doris.

thanks for the heads up about the rings. i have no car, and don't know any near garage, so i've just ordered a pack of 100 o-rings for $3.50 from china. now you know who to ask for them, will be plenty of spares

 

[Nikkita6]

I don't think it's copper. I think it's some kind of PVD coating just different color. It is kinda rose color))) Coating only on outside. Here one what i got Kayfun Lite Plus Kit Gold Black Rose Gold Atomizer RBA Kayfun Lite Kit by Ehpro | eBay fast shipping too.

O yes, i'm proud of myself. But this is just me, never good enough, need something better

Oh that is even better .. then I don't have to worry about any dreadful patina. .. I can relate to you thinking your pipe could be better. That is usually what inspires a person to keep creating. Whenever I have completed one of my creations, at first I feel satisfied, and then I immediately begin to take note of the mistakes I made so that I will know what to do better next time.

How does it vape?? I take it that you have a 18350 battery in there right?

 

[Nikkita6]

Mornin' Nicole,

the reason I say the Heron is a "kayfun killer" is mainly due to the flavor. the flavor is better than any other RTA I own. I think it's mainly due to a really small chamber and small diameter chimney. and so easy to fill, takes literally 5 seconds NO leaking, gurgling or dry hits, it just works! I've had it for about a week now and, it's what i'm using now for my ADV device... loving the crap out of it! I have 3 GP paps so, I need 2 more Heron's hahaha kidding...

Morning to you Nelson, and thanks for the feedback. Well of course I have to get a Heron, I already love the look of it, and now that I know the clone is a winner, I want it! I will have to ask Doris to put this one on the list as well.

And who are you kidding Nelson, I bet you will eventually have at least one more Heron, if not two ... I bet ya!

 

[Nikkita6]

ohhhhh DNA 30 in new arrivals and takes 18650 battery, nice

*I do not need anymore mods, I do not need anymore mods, got to keep telling myself that

Nailz ... it futile to fight the feeling ... just give in, you know you want to. You need a DNA 30 to round out your collection .. really, you need it.

 

[Nikkita6]

FC also put up the Stainless steel version of the Rocket ... the cheaper chrome version has always received good reviews, so Kayfun lovers may want to consider this one. I actually bought this exact Rocket from ChinaBuye at the same time that I made my first order with FC back in December ... I sold it though without ever using it, only because I thought the finish was brushed, and it was polished.

It has an air flow control ring, so that it a nice little feature to have ... That Dominator RDA also looks interesting.

 

[bugboys]

ohhhhh DNA 30 in new arrivals and takes 18650 battery, nice

*I do not need anymore mods, I do not need anymore mods, got to keep telling myself that

There are at least two different versions of this clone and I can't tell which one this is from the pictures. I have the one made by Clouper, which does not have a seam on the top. If I could only have one mod this would be it. Love the consistent vape through the entire battery life. Not so good for cloud chasing, obviously, but for daily use it is very nice.

 

[Laylel]

Oh that is even better .. then I don't have to worry about any dreadful patina. .

Oh, no worries about it, it's sure no real copper just close color.

Oh that is even better .. then I don't have to worry about any dreadful patina. .. I can relate to you thinking your pipe could be better. That is usually what inspires a person to keep creating. Whenever I have completed one of my creations, at first I feel satisfied, and then I immediately begin to take note of the mistakes I made so that I will know what to do better next time.

How does it vape?? I take it that you have a 18350 battery in there right?

It host 18350. Vape is... not good, i need to get other dt. This one i adapted from original steam what come with pipe and it doesn't seem works great. With other dt it's an awesome.
I will say i knew it's prototype of prototype. I found a pipe what i will like to convert, just need to get everything ready. This pipe is also = creating a bicycle (when it's already invented) i found info what will let me do it better and more safe.

 

[Nikkita6]

Oh, no worries about it, it's sure no real copper just close color.



It host 18350. Vape is... not good, i need to get other dt. This one i adapted from original steam what come with pipe and it doesn't seem works great. With other dt it's an awesome.
I will say i knew it's prototype of prototype. I found a pipe what i will like to convert, just need to get everything ready. This pipe is also = creating a bicycle (when it's already invented) i found info what will let me do it better and more safe.

Then chop chop young lady, I can't wait to see your next modded pipe creation.

 

[bugboys]

Laylel, very nice work on the pipe! that's something I've wanted to do for a long time and just haven't had the motivation to do.

 

[Laylel]

Laylel, very nice work on the pipe! that's something I've wanted to do for a long time and just haven't had the motivation to do.

Thank you. I found good resource for how to do it right and easy. I can't wait.