Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
586 posts ...... NO WAY IN HELL I got time to read all that! 
Hi all. How's everyone doing!!!!
I keep seeing US Warehouse? When did that happen? Are those orders still being placed thru FT?
Somebody catch me up.
I'm out in the middle of nowhere. It'll probably be another 586 posts before I get back home next week.
Sent from a BIG phone.....Galaxy Note 3
Hi all. How's everyone doing!!!!
I keep seeing US Warehouse? When did that happen? Are those orders still being placed thru FT?
Somebody catch me up.
I'm out in the middle of nowhere. It'll probably be another 586 posts before I get back home next week.
Sent from a BIG phone.....Galaxy Note 3
FC has put a sweet looking Plume veil clone, it looks great in the pics, but I need Weezy to get his .... in here and offer up some thoughts on it. I think its a handsome looking rda. Was just over in the Rebuildable section posting about the Mephisto, and came across a thread with a Plume veil set up with a Turtle V2 
Penny 18650 on group buy for $17.60!!!
Let me investigate darling, and I will be right back. I literally just went to FC like 2 minutes ago and was immediately distracted by the Plume veil .. I sure hope its the good Penny mod Bam, cuz you know Nikki loves the Penny too!
586 posts ...... NO WAY IN HELL I got time to read all that!
Hi all. How's everyone doing!!!!
I keep seeing US Warehouse? When did that happen? Are those orders still being placed thru FT?
Somebody catch me up.
I'm out in the middle of nowhere. It'll probably be another 586 posts before I get back home next week.
Sent from a BIG phone.....Galaxy Note 3
Hey woman
The FC US warehouse has been around for a couple of months, but they never had anything in it that drew much attention .. until now that is. They have the very sex SXK Stingray X, and they will soon have the Acerig Manhattan in Red, Black, and Copper .. the Copper will not arrive at the same time though, I don't think. Nice to see ya lady
Penny 18650 on group buy for $17.60!!!
Ok Bam, from all that I know about the construction, I would say yes, that this the good version. But I think this maybe the non clear coated version though. But it has the good insulated, magnetic switch. I still love this mod, but I want clear coat
But for this price, I could clear coat it myself with some rustoleum spray, like Crocky did
I was looking at the Acerig version of the Plume veil while scoping their Manhattans. Doris told me that this Plume veil was obtained by another staff member, so she doesn't know who made, but it looks really good though. I will see if I can find out by going to Acerig and checking for detailed pics with identifying marks, as some clones tend to have.
I was also hoping that Weezy might chime in, but I know he is busy with stuff.
Ifn while yer creapin round and a second authentic should just happen to come into yer possession, let me know
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
I will do that ... although I might be overcome with greed 
Ill Get some pics of the Plumeveil when I get a chance. I have the one without engravings.
1. Them positive post screws sucks the behind like no tomorrow. Use some spare screws with all them Attys you have laying in the bags. I'm sure something will fit. I used the extra Stillare screws.
2. If you juice too much it will leak out the air holes for the negative post airflow
3. Hits like a champ and can produce major vapor with the right build. When wicking only enough to drape to hit the well. You don't want massive cotton clouds cuz then you restrict the airflow coming from the negative post.
I've been using since I got it last week. I have all air flows open. Even have drip tip derlin air flow when screwed down. Want more intense flavor close that derlin drip all the way up. The three holes on the tank allows you to maneuver the coils the way you like. Even the positive post can move to accommodate your setup. But make sure you tightened the positive pin on bottom. Worth it to try an atty. 13 bucks won't break the bank.
1. Them positive post screws sucks the behind like no tomorrow. Use some spare screws with all them Attys you have laying in the bags. I'm sure something will fit. I used the extra Stillare screws.
2. If you juice too much it will leak out the air holes for the negative post airflow
3. Hits like a champ and can produce major vapor with the right build. When wicking only enough to drape to hit the well. You don't want massive cotton clouds cuz then you restrict the airflow coming from the negative post.
I've been using since I got it last week. I have all air flows open. Even have drip tip derlin air flow when screwed down. Want more intense flavor close that derlin drip all the way up. The three holes on the tank allows you to maneuver the coils the way you like. Even the positive post can move to accommodate your setup. But make sure you tightened the positive pin on bottom. Worth it to try an atty. 13 bucks won't break the bank.
Let me investigate darling, and I will be right back. I literally just went to FC like 2 minutes ago and was immediately distracted by the Plume veil .. I sure hope its the good Penny mod Bam, cuz you know Nikki loves the Penny too!
Ok Bam, from all that I know about the construction, I would say yes, that this the good version. But I think this maybe the non clear coated version though. But it has the good insulated, magnetic switch. I still love this mod, but I want clear coat
But for this price, I could clear coat it myself with some rustoleum spray, like Crocky did
Thank you sweetie...so happy to hear that!
Especially since I couldn't stop myself and already ordered it!!! Of course I remembered you love this mod, you were my first thought when I saw it!
And I made a note when Crocky talked about that spray, it's already on my list for my next Lowe's run! I have no problem doing the coating myself, especially if it means I get to have it sooner. Love this buttery mod!
The more I use this 4nine I got in the group buy the more I'm enjoying it. Even at the "list" price of around $25 its a great little mod. It was a steal for the $16 or $17 group buy price. I have a brass Nemesis but it has the more typical lightly brushed finish. Does anyone know of other mods that have the same deeply brushed finish like this 4nine?
How is the group buy Penny mod? I know that the "is it a good one" question will be answered, I'm looking more for things like the switch works well, it is easy to fire, it can be adjusted for any size atomizer and battery easily, etc. That sort of thing, I'd say that I want to know if it "usable" I guess.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
How is the group buy Penny mod? I know that the "is it a good one" question will be answered, I'm looking more for things like the switch works well, it is easy to fire, it can be adjusted for any size atomizer and battery easily, etc. That sort of thing, I'd say that I want to know if it "usable" I guess.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
I'm really liking my 4nine also. I got the stainless version on the group buy. Took a little work but it performs flawless now.
- Dirk
That plume veil does look pretty good. I'm thinking of going in on the $30 Acerig v1.5 preorder, maybe a gold one of those and this FC one. Would be awesome if Doris could get Acerig plume veil 1.5s in the US warehouse and one up the guy that got the v1 that came out today.
Sent from my HTCONE using Tapatalk
Ill Get some pics of the Plumeveil when I get a chance. I have the one without engravings.
1. Them positive post screws sucks the behind like no tomorrow. Use some spare screws with all them Attys you have laying in the bags. I'm sure something will fit. I used the extra Stillare screws.
2. If you juice too much it will leak out the air holes for the negative post airflow
3. Hits like a champ and can produce major vapor with the right build. When wicking only enough to drape to hit the well. You don't want massive cotton clouds cuz then you restrict the airflow coming from the negative post.
I've been using since I got it last week. I have all air flows open. Even have drip tip derlin air flow when screwed down. Want more intense flavor close that derlin drip all the way up. The three holes on the tank allows you to maneuver the coils the way you like. Even the positive post can move to accommodate your setup. But make sure you tightened the positive pin on bottom. Worth it to try an atty. 13 bucks won't break the bank.
Thanks for that feedback hun .. I am not that familiar with the Plume, but I have noticed that there are several threads about it, and the name comes up frequently RDA discussions.
Thank you sweetie...so happy to hear that!
Of course I remembered you love this mod, you were my first thought when I saw it!
And I made a note when Crocky talked about that spray, it's already on my list for my next Lowe's run! I have no problem doing the coating myself, especially if it means I get to have it sooner. Love this buttery mod!
Bam you are so awesome! I love a woman who takes the initiative to get it done! I just may follow suit too, I think every vaper should have a can of clear coat handy
You should go check out some reviews on youtube, I think Twisted may have reviewed the Penny. The contacts are adjustable, no clue how easy the switch will be to fire though.
I agree, especially since it is hot right now. I will keep the bug in Doris's ear about it.
- Status
Similar threads
- Locked
