Focalecig ... A new Fasttech??

[Nikkita6]

My robbot and 18650 tube arrive Saturday �� the tail fun gt seems nice as well as the rose. The Russians on FC do not say anything about an adjustable 510 and 2 of them have no specs at all. It's a shame cause I would like to give my business to FC for the Russian.mvery excited to see your review on the Rose

I will prolly PM when its posted, to make up for keeping you in suspense On the Russian's don't risk it if you can't confirm that the pin is adjustable, and quite frankly if you ask them, they will have no idea what you are talking about

Are you strictly a rba guy, or dripper too?

 

[Nikkita6]

I have a few Taifuns and have gotten them all at FT. I'm weaning myself off FT though, it's getting longer and longer to ship and if something goes wrong it feels like you have to fight them to fix it. I just sent them a nasty gram this morning and told them to get their chit together or I was going to buy exclusively from FC. Funny, problem was fixed within the hour. That's BS and should have been fixed without threats!

Nasty gram! .. They recently deleted a thread about the Rose because everyone was talking about FC's Rose and not theirs ..I also strongly suspect that FT lurks in this thread, I find it highly suspect that their ZNA 50 clone dropped on the same day as FC's Robbot. Especially since not a single soul has received their Hotcig ZNA that was posted ONE MONTH AGO! .. From the FT discussions, some seem gun shy about this 50W ZNA because no one has even received their first ZNA

 

[reef153]

I am in love with rbas but do own an origen v2. I got the dripper when I received my wotofo as I wanted to try dripping at 20, 25, 30 watts. Amazing flavor but dripping for me is just a way for me to try out my juice as it steeps. a little too much vape for me and a little too warm. Of course the dual coils running at .4 had something to do with that. I run my kayfuns between .9 and 1.0 with about 16.9w

 

[Nikkita6]

I am in love with rbas but do own an origen v2. I got the dripper when I received my wotofo as I wanted to try dripping at 20, 25, 30 watts. Amazing flavor but dripping for me is just a way for me to try out my juice as it steeps. a little too much vape for me and a little too warm. Of course the dual coils running at .4 had something to do with that. I run my kayfuns between .9 and 1.0 with about 16.9w

Yeah the .4 ohm build defintely had something to do with that warmth Try a single coil set up at a higher resistance The Mephisto is still my favorite so far because I can drip into it without taking the top cap off and it is single coil compatible. The 454 Big block was sent to me for review, but I haven't received it yet so that will be interesting.

There has to be a list somewhere with the names of all the atties with adjustable 510 pins, if not, someone should create it, and not me Or .. look for a Kayfun with a flush 510 pin. I tried one with a 1mm past thread length and it left me with a tiny gap. I have the Rose adjusted to be flush with the 510 threads.

 

[Nikkita6]

Oh and Reef, if you are in love with RBA's then you have to get a Rose, it is a Kayfun killer for me ... don't be scurred

 

[reef153]

Oh and Reef, if you are in love with RBA's then you have to get a Rose, it is a Kayfun killer for me ... don't be scurred

Twist my arm....just ordered it

 

[Nikkita6]

Twist my arm....just ordered it

Sorry hun, didn't mean to abandon you mid temptation You will not be sorry .. at least not after you get the hang of building it. By the time you receive it my review will have posted and I do go over building it, with nice big photos. So you will be all good.

 

[Nikkita6]

Halfempty .. I see you! FYI Pedro, you were in my thoughts today. I came across your old shipping label from when you sent me the 3D... that baby peeled right off and is still sticky too!

I am reusing the box to send out a package to a contest winner, so I thought of you because I am actually paying a few things forward in addition to the ZNA that was up for grabs. See, its the gift that keeps on giving. Miss you boo

 

[Nailz]

Squape Reloaded hit new arrivals this morning, and comes with all 3 decks, says 1st 50 pieces will ship in 24 hours, damn good price too

You kept that one quiet Nikki

 

[haku]

tank material should be specified for the squape r..

 

[nelsonm64]

Squape Reloaded hit new arrivals this morning, and comes with all 3 decks, says 1st 50 pieces will ship in 24 hours, damn good price too

You kept that one quiet Nikki

I know hey... damn her but, if I didn't have one on pre-order i'd be all over this! still very tempting though. all 3 decks! hmm.

 

[Crocky]

Squape Reloaded hit new arrivals this morning, and comes with all 3 decks, says 1st 50 pieces will ship in 24 hours, damn good price too

You kept that one quiet Nikki

I saw that too but for some reason I thought these would come with glass tanks. I must be thinking of something else!
Happy Friday!

 

[Sankara]

Just received the Hana modz from focalecig group buy...and its seems its a bit faulty! I'm getting 'too hot' after chain vaping it for like 2 times (3 hits each times with the last being a 'long' hit -> mouth to long). I really find it VERY ....ty to be honest, since i always chain vape. It was with a KF3.1 clone @1.6 ohm @15 watt....so that's half the power it could supply. Shouldn't be 'too hot' that fast in my eyes!

Now i've tested it with a 1.5 carto @9 watts, still after chainvaping about the same amount --> too hot! In other words: I CAN'T chain vape on this device! And its not that i'm trying to chainvape @ 0.8 @ 30 wattage...nope. 1.5 / 1.6 @ 9 watt/15 watt >.< i mean a VAMO could pull that off.

Also a scary thing happened: Tried the 30 watt settings on my KF3.1. When i tried to vape on it, something blew up in the kayfun! I heard a 'loud' popping sound when i vaped on it! Scared the .... out of me. Now im not sure if my KF just blew up, it does seem to vape normally after it, but i think the taste is different (somewhat chemical taste to the e juice). Not sure if the isolator is burned out now (haven't checked yet).

Anyways this should act as a warning i hope. The quality of the hana modz of Focalecig seem to be superior of that of FT, but it still has faults! And if you can't chainvape it @1.6 ohm @15 watt, then what the f is the use of this device? @_@

EDIT: well, besides the too hot thing and that it might have blown up my KF, this seems to be a good device. I mean, it has at least a cover for the internal wires, the buttons are smooth, the display is good, and you really feel the higher wattage. Compare 8 watts of my mvp, this seems like 'true' 8 watts (@1.5 with a carto). The difference is huge! Which makes it sucks more that i can't even chain vape on it.

 

[inswva]

Just received the Hana modz from focalecig group buy...and its seems its a bit faulty! I'm getting 'too hot' after chain vaping it for like 2 times (3 hits each times with the last being a 'long' hit -> mouth to long). I really find it VERY ....ty to be honest, since i always chain vape. It was with a KF3.1 clone @1.6 ohm @15 watt....so that's half the power it could supply. Shouldn't be 'too hot' that fast in my eyes!

Now i've tested it with a 1.5 carto @9 watts, still after chainvaping about the same amount --> too hot! In other words: I CAN'T chain vape on this device! And its not that i'm trying to chainvape @ 0.8 @ 30 wattage...nope. 1.5 / 1.6 @ 9 watt/15 watt >.< i mean a VAMO could pull that off.

Also a scary thing happened: Tried the 30 watt settings on my KF3.1. When i tried to vape on it, something blew up in the kayfun! I heard a 'loud' popping sound when i vaped on it! Scared the .... out of me. Now im not sure if my KF just blew up, it does seem to vape normally after it, but i think the taste is different (somewhat chemical taste to the e juice). Not sure if the isolator is burned out now (haven't checked yet).

Anyways this should act as a warning i hope. The quality of the hana modz of Focalecig seem to be superior of that of FT, but it still has faults! And if you can't chainvape it @1.6 ohm @15 watt, then what the f is the use of this device? @_@

EDIT: well, besides the too hot thing and that it might have blown up my KF, this seems to be a good device. I mean, it has at least a cover for the internal wires, the buttons are smooth, the display is good, and you really feel the higher wattage. Compare 8 watts of my mvp, this seems like 'true' 8 watts (@1.5 with a carto). The difference is huge! Which makes it sucks more that i can't even chain vape on it.

That's a shame. My FC HANAA box has been running flawlessly for three weeks. I run it all day @ 23W with a 1.2ohm'd Lemo on top. I don't chain vape it though in the manner you describe. I'll give it a shot when I get home tonight and see what happens (can't be chucking walls of vapor at work, lol).

As for your KF, I think you probably fried the insulator.

 

[TamiPac]

Just received the Hana modz from focalecig group buy...and its seems its a bit faulty! I'm getting 'too hot' after chain vaping it for like 2 times (3 hits each times with the last being a 'long' hit -> mouth to long). I really find it VERY ....ty to be honest, since i always chain vape. It was with a KF3.1 clone @1.6 ohm @15 watt....so that's half the power it could supply. Shouldn't be 'too hot' that fast in my eyes!

Now i've tested it with a 1.5 carto @9 watts, still after chainvaping about the same amount --> too hot! In other words: I CAN'T chain vape on this device! And its not that i'm trying to chainvape @ 0.8 @ 30 wattage...nope. 1.5 / 1.6 @ 9 watt/15 watt >.< i mean a VAMO could pull that off.

Also a scary thing happened: Tried the 30 watt settings on my KF3.1. When i tried to vape on it, something blew up in the kayfun! I heard a 'loud' popping sound when i vaped on it! Scared the .... out of me. Now im not sure if my KF just blew up, it does seem to vape normally after it, but i think the taste is different (somewhat chemical taste to the e juice). Not sure if the isolator is burned out now (haven't checked yet).

Anyways this should act as a warning i hope. The quality of the hana modz of Focalecig seem to be superior of that of FT, but it still has faults! And if you can't chainvape it @1.6 ohm @15 watt, then what the f is the use of this device? @_@

EDIT: well, besides the too hot thing and that it might have blown up my KF, this seems to be a good device. I mean, it has at least a cover for the internal wires, the buttons are smooth, the display is good, and you really feel the higher wattage. Compare 8 watts of my mvp, this seems like 'true' 8 watts (@1.5 with a carto). The difference is huge! Which makes it sucks more that i can't even chain vape on it.

I am really sorry to hear that. Mine seems to work flawlessly but I don't vape that strong on it. I agree your insulator on the Kayfun is probably fried.

 

[TamiPac]

Nikki oh evil sister addict....I finally bought the Rose this morning! Doris has sent me 7 e-mails and has everything figured out, they are sending the sticker with the Rose...that will ship tons faster than was specified. I was also told "no need bother Nikki, she busy lady" that cracked me up. She's a nice lady and was very helpful.

You my darling are a gem!

 

[haku]

ordered the squape r. it has to be glass (the tank)

 

[G-weezy]

Off Topic:

Well got my cloud competition setup real nice. Lol.

Whatcha know bout that. Ooo Yeah!!!!!

 

[TamiPac]

Has anyone considered updating their Kato with magnets? I'm thinking about it. Sometimes the spring sounds crunchy and it bothers me

 

[haku]

Off Topic:

Well got my cloud competition setup real nice. Lol.

Whatcha know bout that. Ooo Yeah!!!!!

lmao

Has anyone considered updating their Kato with magnets? I'm thinking about it. Sometimes the spring sounds crunchy and it bothers me

will try for sure when it arrives here